/**
 * Created by zhang on 2018/5/10.
 */
let BlockController = {
    datas:[],
    copyBtnDisable:function (selected) {
        if(this.isDXFYorMainEq(selected)){
            return true;
        }
        if(selected.sourceType == ModuleNames.ration && selected.data.type == rationType.install){
            return true;
        }
        return false;
    },
    pasteBtnDisable:function (selected) {
        let blockData = this.getBlockData();
        let Bills = projectObj.project.Bills;
        if(this.isDXFYorMainEq(selected)){
            return true;
        }
        if(blockData == null){
            return true;
        }
        if(blockData.firstNodeType != blockType.RATION && blockData.isFBFX !=  Bills.isFBFX(selected)){//除了复制定额外，焦点行和复制的块不是来自同一个地方（分部分项工其它）
            return true;
        }
        if(selected.sourceType == Bills.getSourceType() && selected.data.type == billType.FX && blockData.firstNodeType == blockType.FB){//焦点行是分项，复制块的第一层是分部，则无效。
            return true;
        }
        if(blockData.firstNodeType == blockType.RATION && selected.sourceType == Bills.getSourceType()){ //复制的是定额/量价/工料机、焦点行是分部/清单父项则无效
            if( selected.data.type == billType.FB ){
                return true;
            }
            if(MainTreeCol.readOnly.billsParent(selected)){
                return true;
            }
        }
        if(blockData.firstNodeType != blockType.RATION && selected.sourceType == ModuleNames.ration){
            return true;
        }
        return false;
    },
    isDXFYorMainEq:function (node) {//焦点行是大项费用或定额下的主材设备
        if(node.sourceType == ModuleNames.bills && node.data.type == billType.DXFY){//焦点行是大项费用则无效；
            return true;
        }
        if(node.sourceType == ModuleNames.ration_glj){// 焦点行是定额下的主材设备则无效；
            return true;
        }
        return false;
    },

    getBlockData:function () {
        let blockString =getLocalCache('project_block');
        if(blockString !=null){
            return JSON.parse(blockString);
        }
        return null;
    },

    copyBlock:function (selected) {
        let startTime = +new Date();
        let blockOjb = {
            compilationID:projectInfoObj.projectInfo.compilation
        };
        if(selected.sourceType == projectObj.project.Bills.getSourceType()){
            blockOjb.firstNodeType = selected.data.type;
        }else if(selected.sourceType == projectObj.project.Ration.getSourceType()){
            blockOjb.firstNodeType = blockType.RATION;
        }
        blockOjb.isFBFX = projectObj.project.Bills.isFBFX(selected);
        let ration_glj_Map = _.groupBy(projectObj.project.ration_glj.datas, 'rationID');
        blockOjb.data = this.getNodeDatas(selected,ration_glj_Map);
        let getDataTime = +new Date();
        console.log(`复制所用时间——${getDataTime - startTime}`);
        blockOjb.copyTime = +new Date();//设置复制时间，可以用来做过期处理
        setLocalCache('project_block',JSON.stringify(blockOjb));
        let endTime = +new Date();
        console.log(`复制所用时间——${endTime - startTime}`);
    },
    getNodeDatas : function (node,ration_glj_Map) {
        let data = node.data;
        data.sourceType =  node.sourceType;
        if(node.sourceType == projectObj.project.Bills.getSourceType()){
            data.quantity_details = projectObj.project.quantity_detail.getDetailByBillID(data.ID);
        }
        if(node.sourceType == projectObj.project.Ration.getSourceType()){
            if(node.data.type == rationType.install){ //如果是生成的安装增加费，则跳过
                return null;
            }
            let gljList = ration_glj_Map[data.ID]?ration_glj_Map[data.ID]:[];//gljOprObj.filterGljByRation(node.data, datas);
            gljList = gljOprObj.combineWithProjectGlj(gljList,false);
            data.ration_gljs = gljList;
            data.ration_coes = projectObj.project.ration_coe.getCoeByRationID(data.ID);
            data.ration_installations =  projectObj.project.ration_installation.getInstallationByRationID(data.ID);
            data.quantity_details = projectObj.project.quantity_detail.getDetailByRationID(data.ID);
        }else if(node.children.length>0){
            let children = [];
            for(let c of node.children){
                let tem_data = this.getNodeDatas(c,ration_glj_Map);
                tem_data?children.push(tem_data):'';
            }
            data.children = children;
        }
        return data;
    },
    pasteBlock:function (selected) {
        let blockData = this.getBlockData();
        let position = this.initOptionDiv(selected,blockData);
        if(position == null){
            return;
        }
        this.confirmPaste(blockData,selected,position);
        //do paste
    },

    initOptionDiv:function (selected,blockData) {
        let Bills = projectObj.project.Bills;
        if( blockData.firstNodeType == blockType.RATION){//如果剪切板中是复制的定额块
            if(selected.sourceType == ModuleNames.ration && selected.data.type != rationType.install ){//焦点行是定额/量价/工料机，则粘贴为后项
                return "next";
            }
            if(isFXorBX(selected)||(selected.sourceType === Bills.getSourceType()&& selected.source.children.length == 0)){//焦点行是分项/叶子清单，且无基数计算，则粘贴到分项/叶子清单下
                if(selected.data.calcBase ==null||selected.data.calcBase ==undefined|| selected.data.calcBase == ""){//无基数计算
                    return "sub";
                }
            }
        }

        //设置选项的初始值
        setRadioProp('next_node',{checked:true,disabled:false});
        setRadioProp('pre_node',{checked:false,disabled:false});
        if(Bills.isFBFX(selected)){//  (2.1)、焦点行属于“分部分项工程”：
            //复制块的第一层、焦点行的类型都是“分部”
            if(blockData.firstNodeType == blockType.FB && isFB(selected)){
                //默认为当前行的后项，可选前项、子项。
                setRadioProp('sub_node',{checked:false,disabled:false});
            }
            //复制块的第一层、焦点行的类型都是“分项”或补项
            if(blockIsFXorBX(blockData.firstNodeType) && isFXorBX(selected)){
                //默认为当前行的后项，可选前项，子项灰显不可选。
                setRadioProp('sub_node',{checked:false,disabled:true});
            }
            //复制块的第一层是分项，焦点行是分部，且分部下无子项或者子项是分项
            if(blockIsFXorBX(blockData.firstNodeType)&& isFB(selected)){
                if(selected.children.length == 0 || isFXorBX(selected.children[0])){
                    return 'sub';//不弹出选择窗口,直接粘贴为子项。
                }
            }
        }else {//焦点行不属于“分部分项工程”
            if(blockData.firstNodeType == blockType.BILL &&selected.sourceType == Bills.getSourceType()){//如果剪切板中是从“分部分项工程”以外复制的清单块
                if(selected.children.length==0 || selected.children[0].sourceType == Bills.getSourceType()){//焦点行没有子项，或者子项是清单，判断是否有基数计算
                    if(selected.data.calcBase && selected.data.calcBase!=""){//如果焦点行有基数计算，则子项灰显不可选。
                        setRadioProp('sub_node',{checked:false,disabled:true});
                    }else{//如果焦点行没有基数计算，则子项可选。
                        setRadioProp('sub_node',{checked:false,disabled:false});
                    }
                }else {
                    setRadioProp('sub_node',{checked:false,disabled:true});
                }
            }
        }
        $("#pastePosition").modal({show:true});
        return null;

       function setRadioProp(id,options) {
           $("#"+id).prop("checked",options.checked);
           $("#"+id).prop("disabled",options.disabled);
       }

       function isFB(selected) {
           return selected.sourceType == Bills.getSourceType() && selected.data.type == billType.FB;
       }

       function isFXorBX(selected) {//是分项或者补项
            if(selected.sourceType == Bills.getSourceType()){
                return   selected.data.type == billType.FX || selected.data.type == billType.BX;
            }
            return false;
       }
       function blockIsFXorBX(type) {
           return type == blockType.FX||blockType.BX;
       }

    },
    /**
     * @param blockData
     * @param selected
     * @param position next/pre/sub
     */
    confirmPaste:function (blockData,selected,position) {
        let Bills = projectObj.project.Bills;
        let parent = null,next = null,pre = null;
        let updateData = [],billUpdate = null;
        let billsIDMap = {};//用来做新旧ID映射
        if(blockData.compilationID != projectInfoObj.projectInfo.compilation){//如果编办不一样，不能复制
            alert("编办不一致，不能粘贴！");
            return;
        }
        if(position == 'next'){ //插入为选中节点的后项,即选中节点为前项
            parent = selected.parent;
            next = selected.nextSibling;
            pre = selected;
        }
        if(position == 'pre'){//插入为选中节点的前项,即选中节点为后项
            parent = selected.parent;
            next = selected;
            pre = selected.preSibling;
        }
        if(position == 'sub'){//即选中节点为父项
            parent = selected;
            pre = selected.lastChild();
        }
        let parentID = parent?parent.getID():-1;
        let nextID = next?next.getID():-1;
        if(blockData.firstNodeType == blockType.RATION){ //复制的是定额，需根据新的父项信息和工程量明细计算工程量
            blockData.data.billsItemID = parentID;
            let billsQuantity = scMathUtil.roundForObj(parent.data.quantity,getDecimal("quantity",parent));
            this.calcRationQuantityAndContain(billsQuantity,blockData.data);
            //如果粘贴位置不属于分部分项工程，或者不是安装工程，则把安装增加费内容置空
            if(!Bills.isFBFX(parent)|| projectInfoObj.projectInfo.property.engineering!=engineeringType.BUILD_IN){
                blockData.data.ration_installations = [];
            }
            //计算序列号
            this.calcRationSerialNo(parentID,blockData,updateData,pre,next);
        }else {
            blockData.data.ParentID = parentID;
            blockData.data.NextSiblingID=nextID;
            if(pre){
                billUpdate = {type:blockData.data.sourceType,query:{ID:pre.getID()},doc:{NextSiblingID:blockData.data.ID}};
            }
        }
        let dataMap = this.preparePasteData(blockData.data,billsIDMap);
        if(billUpdate){
            billUpdate.doc.NextSiblingID = billsIDMap[billUpdate.doc.NextSiblingID];
            updateData.push(billUpdate);
        }
        dataMap.updateData = updateData;
        console.log(dataMap);
        $.bootstrapLoading.start();
        CommonAjax.post('/bills/pasteBlock',dataMap,function (data) {
             $.bootstrapLoading.end();


        })

        //  delete fees / feesIndex /__v
    },

    preparePasteData : function (data,billsIDMap) {
        let me = this;
        me.datas = _.cloneDeep(projectObj.project.Bills.datas);
        let bills = [],rations=[],ration_gljs = [],ration_coes = [],quantity_details = [],ration_installations = [];

        eachData(data);
        for(let b of bills){//更新ID
            billsIDMap[b.ParentID]?b.ParentID = billsIDMap[b.ParentID]:'';
            billsIDMap[b.NextSiblingID]?b.NextSiblingID = billsIDMap[b.NextSiblingID]:'';
        }


        return {bills:bills,rations:rations,ration_gljs:ration_gljs,ration_coes:ration_coes,quantity_details:quantity_details,ration_installations:ration_installations};

        function eachData(data) {
            if(data.sourceType == 'bills'){
                let tem_b = createBillsData(data);
                bills.push(tem_b);
                for(let d of data.quantity_details){
                    quantity_details.push(createQuantityDetails(d,tem_b,'bills'));
                }
                if(data.children && data.children.length>0){
                    for(let c of data.children){
                        eachData(c);
                    }
                }
            }

            if( data.sourceType == 'ration'){
                let tem_r = createRationData(data);
                rations.push(tem_r);
                for(let d of data.quantity_details){
                    quantity_details.push(createQuantityDetails(d,tem_r, 'ration'));
                }
                for(let g of data.ration_gljs){
                    let tem_rg = createSubList(g,tem_r);
                    tem_rg.billsItemID = tem_r.billsItemID;
                    ration_gljs.push(tem_rg);
                }
                for(let o of data.ration_coes){
                    ration_coes.push(createSubList(o,tem_r));
                }
                for(let ri of data.ration_installations){
                    ration_installations.push(createSubList(ri,tem_r));
                }
            }

        }

        function createSubList(subData,rationData) {
            let tem_sub = _.cloneDeep(subData);
            delete tem_sub._id;
            tem_sub.ID = uuid.v1();
            tem_sub.projectID = projectObj.project.ID();
            tem_sub.rationID = rationData.ID;
            return tem_sub;
        }

        function createQuantityDetails(detailData,pdata,type) {
            let tem_detail = _.cloneDeep(detailData);
            tem_detail.ID = uuid.v1();
            tem_detail.projectID = projectObj.project.ID();
            if(type == 'bills'){
                tem_detail.billID = pdata.ID;
            }
            if(type == 'ration'){
                tem_detail.rationID = pdata.ID;
            }
            return tem_detail;
        }

        function createRationData(rationData) {
            let tem_ration = _.cloneDeep(rationData);
            //删除旧数据
            delete tem_ration.fees;
            delete tem_ration.feesIndex;
            delete tem_ration.ration_gljs;
            delete tem_ration.ration_coes;
            delete tem_ration.ration_installations;
            delete tem_ration.quantity_details;
            delete tem_ration.__v;
            delete tem_ration.sourceType;

            tem_ration.projectID = projectObj.project.ID();
            tem_ration.ID = uuid.v1();
            billsIDMap[tem_ration.billsItemID]?tem_ration.billsItemID = billsIDMap[tem_ration.billsItemID]:'';

            let firstLibID = rationLibObj.getFirstStdRationLibID();
            if(firstLibID){
                tem_ration.prefix = projectObj.project.Ration.getRationPrefix(firstLibID,tem_ration);
            }
            return tem_ration;

        }

        function createBillsData(billsData) { //ID、重新生成code
            let temData = _.cloneDeep(billsData);
            //删除旧数据
            delete  temData.fees;
            delete  temData.feesIndex;
            delete  temData.children;
            delete  temData.quantity_details;
            delete  temData.__v;
            delete  temData.sourceType;

            temData.projectID = projectObj.project.ID();
            let newID = uuid.v1(); //新的清单ID
            billsIDMap[temData.ID] = newID;
            temData.ID = newID; //新的清单ID
            if(temData.billsLibId && temData.billsLibId!="" && temData.code.length == 12){//是从清单库来的
                let value = temData.code.substr(0,9);
                if (value&&value.length === 9 && /^[\d]+$/.test(value)) {
                    temData.code = projectObj.project.Bills.newFormatCode(value);
                }
            }

            me.datas.push(temData);//为了下一个清单的std code 一样
            return temData;
        }
    },

    calcRationSerialNo:function (billsItemID,blockData,updateData,pre,next) {
        let br = projectObj.project.Ration.getBillsSortRation(billsItemID);
        if(next == null){ //没有下一树节点，即为最后节点
            blockData.data.serialNo = br.length > 0 ? br[br.length - 1].serialNo + 1 : 1;
        }else {//有下一节点
            let startIndex =0;
            if(pre){
                startIndex = br.indexOf(pre.data)+1;
            }
            blockData.data.serialNo = br[startIndex].serialNo;
            for(let i = startIndex;i < br.length; i++){
                let br_serialNo =  i < br.length - 1 ? br [i + 1].serialNo : br[i].serialNo + 1;
                updateData.push({type:blockData.data.sourceType,query:{ID:br[i].ID},doc:{serialNo:br_serialNo}});//更新兄弟节点序列号
            }
        }

    },

    calcRationQuantityAndContain : function (billsQuantity,ration) {//计算定额工程量和含量
        let EXPString = ration.quantityEXP+"";
        if(EXPString.indexOf("QDL") != -1){
            if(EXPString=="QDL"){//定额的工程量是直接通过清单量填进来的；
                let times = parseInt(ration.unit);
                if(isNaN(times)){
                    times = 1;
                }
                ration.quantity = scMathUtil.roundForObj(billsQuantity / times,getDecimal("ration.quantity"));
                billsQuantity?ration.contain = scMathUtil.roundForObj(ration.quantity/billsQuantity,getDecimal("process")):ration.contain = 0;
            } else {//如果定额的工程量是通过计算出来的，则应该重新计算。
                let tem_contain = scMathUtil.roundForObj(ration.contain,getDecimal("process"));
                let tem_quantity = scMathUtil.roundForObj(billsQuantity*tem_contain,getDecimal("ration.quantity")); //this.autoTransformQuantity(tem_quantity,rationNode);
                ration.quantity = tem_quantity;
            }
        }else {//GCLMXHJ
            let tem_contain=0;
            if(billsQuantity&&billsQuantity!=0){
                let children_quantity = scMathUtil.roundForObj(ration.quantity,getDecimal("ration.quantity"));
                // children_quantity = scMathUtil.roundForObj(this.reverseQuantity(children_quantity,rationNode),getDecimal("quantity",rationNode));  原先是要反算的，现在改成不用反算了
                tem_contain =scMathUtil.roundForObj(children_quantity/billsQuantity,getDecimal("process"));
            }
            ration.contain = tem_contain;
        }
    },

   newFormatCode : function (stdCode, filterCode) {
        let matchs = this.sameStdCode(stdCode, filterCode);
        let format = function (Number) {
            let s = Number + '';
            while (s.length < 3) {
                s = '0' + s;
            }
            return s;
        };
        for (let i = 0; i <= matchs.length; i++) {
            let formatCode = stdCode + format(i+1);
            if (matchs.indexOf(formatCode) === -1) {
                return formatCode;
            }
        }
    },
    sameStdCode : function (stdCode, filterCode) {
        let reg = new RegExp('^' + stdCode), matchs= [];
        for (let data of this.datas) {
            if (data.code && data.code.length === 12 && reg.test(data.code) && data.code !== filterCode) {
                matchs.push(data.code);
            }
        }
        return matchs;
    },


    removeBlock:function () {
        removeLocalCache('project_block');
    }

};