// INTERFACE_EXPORT =，必须这么写，这样才能在导出时动态加载脚本后，覆盖前端代码

// 参考广东中山导出接口
INTERFACE_EXPORT = (() => {
  "use strict";
  const feeRateMap = {
    冬季施工增加费: "DJSGZJFFL",
    冬季施工: "DJSGZJFFL",
    雨季施工增加费: "YUJSGZJFFL",
    雨季施工: "YUJSGZJFFL",
    夜间施工增加费: "YEJSGZJFFL",
    夜间施工: "YEJSGZJFFL",
    高原地区施工增加费: "GYDQSGZJFFL",
    高原施工: "GYDQSGZJFFL",
    风沙地区施工增加费: "FSDQSGZJFFL",
    风沙施工: "FSDQSGZJFFL",
    沿海地区施工增加费: "YHDQSGZJFFL",
    沿海施工: "YHDQSGZJFFL",
    行车干扰施工增加费: "XCGRGCSGZJFFL",
    行车干扰: "XCGRGCSGZJFFL",
    工地转移费: "GDZYFFL",
    '工地转移(km)': "GDZYFFL",
    施工辅助费: "SGFZFFL",
    施工辅助: "SGFZFFL",
    基本费用: "JBFYFL",
    主副食运费补贴: "ZFSYFBTFL",
    '综合里程(km)': "ZFSYFBTFL",
    职工探亲路费: "ZGTQLFFL",
    职工探亲: "ZGTQLFFL",
    职工取暖补贴: "ZGQNBTFL",
    职工取暖: "ZGQNBTFL",
    财务费用: "CWFYFL",
    养老保险费: "YANGLBXFFL",
    失业保险费: "SYBXFFL",
    医疗保险费: "YILBXFFL",
    工伤保险费: "GSBXFL",
    养老保险: "YANGLBXFFL",
    失业保险: "SYBXFFL",
    医疗保险: "YILBXFFL",
    工伤保险: "GSBXFL",
    住房公积金: "ZFGJJFL",
    规费: "GFZHFL",
    利润: "LRL",
    税金: "SL",
    土方: "TF",
    石方: "SF",
    运输: "YS",
    路面: "LM",
    "路面(不计雨)": "LM",
    隧道: "SD",
    构造物I: "GZW1",
    "构造物I(不计冬)": "GZW1",
    "构造物I(不计雨)": "GZW1",
    构造物II: "GZW2",
    "构造物III(桥梁)": "GZW3",
    "构造物III(除桥以外)": "GZW3",
    "构造物III(除桥以外不计雨夜)": "GZW3",
    技术复杂大桥: "JSFZDQ",
    "钢材及钢结构(桥梁)": "GJG",
    "钢材及钢结构(除桥以外)": "GJG",
    "钢材及钢结构(除桥以外不计夜)": "GJG",
  };

  //计算程序有，这里没有:施工机械使用费\施工机械人工费\定额人工费\定额材料费\定额施工机械使用费
  const itemFeeMap = {
    'marketLabour': 'RGF',
    'marketMaterial': 'CLF',
    'marketMachine': 'JXSYF',
    'marketEquipment': 'SBGZF',
    'direct': 'DEZJF',
    'equipment': 'DESBF',
    'marketDirect': 'ZJF',
    'measure': 'CSF',
    'measure1': 'CSF1',
    'measure2': 'CSF2',
    'manage': 'QYGLF',
    'force': 'GF',
    'profit': 'LR',
    'tax': 'SJ',
    'common': 'JAF',
    'rationCommon': 'DEJAF'
  };

  const feeLibNoMap = {
    'eba0e7c0-cfe6-11ea-ba15-739be477d1fe': 'GYSFL-000000-2018-86',
    '451d3180-e02e-11ea-8056-1514dfc2f39e': 'GYSFL-340000-2019-210',
    '32923ff0-e912-11ea-8b20-d93bc370e960': 'GYSFL-440000-2019-544'
  };

  const FixedCostMap = {
    //折旧费、检修费、维护费、安拆辅助费
    '折旧费': 1,
    '检修费': 1,
    '维护费': 1,
    '安拆辅助费': 1
  }

  const RoadGradeMap = {
    "高速公路": "0",
    "一级公路": "1",
    "二级公路": "2",
    "三级公路": "3",
    "四级公路": "4",
    "等外公路": "5",
    "独立桥梁": "6",
    "独立隧道": "7"
  }

  const sectionNameMap = {
    "清单第100章总则": true,
    "清单第200章路基": true,
    "清单第300章路面": true,
    "清单第400章桥梁、涵洞": true,
    "清单第500章隧道": true,
    "清单第600章安全设施及预埋管线": true,
    "清单第700章绿化及环境保护设施": true,
    // "清单 第800章 机电工程": true,
    // "清单 第900章 附属区房建工程":true
  }

  const ListCodeMap = {
    "第100章至700章清单": "1",
    // "清单 第100章 总则": "一",
    // "清单 第200章 路基": "二",
    // "清单 第300章 路面": "三",
    // "清单 第400章 桥梁、涵洞": "四",
    // "清单 第500章 隧道": "五",
    // "清单 第600章 安全设施及预埋管线": "六",
    // "清单 第700章 绿化及环境保护设施": "七",
    // "清单 第800章 机电工程": "八",
    // "清单 第900章 附属区房建工程": "九",
    "清单第100章总则": "100",
    "清单第200章路基": "200",
    "清单第300章路面": "300",
    "清单第400章桥梁、涵洞": "400",
    "清单第500章隧道": "500",
    "清单第600章安全设施及预埋管线": "600",
    "清单第700章绿化及环境保护设施": "700",


    "已包含在清单合计中的材料、工程设备、专业工程暂估价合计": "13",
    "清单合计减去材料、工程设备、专业工程暂估价合计": "14",
    "计日工合计": "15",
    "劳务": "15.1",
    "材料": "15.2",
    "机械": "15.3",
    "暂列金额(不含计日工总额)": "16",
    "投标报价": "17"
  }

  const ratioCodeMap = {
    "01ZJF": "0",
    "02JXF": "1",
    "03WHF": "2",
    "04ACFZF": "3"
  }

  const reg1 = new RegExp('\n', 'g'), reg2 = new RegExp('\r', 'g')
    , reg3 = new RegExp(' ', 'g'), reg4 = new RegExp('\t', 'g')
    , reg5 = new RegExp('（', 'g'), reg6 = new RegExp('）', 'g')
    , regRt1 = new RegExp('\n\r', 'g'), regRt2 = new RegExp('\r\n', 'g')
    ;

  function getXMLTransitCharacters(orgStr) {
    if ( typeof orgStr === 'string') {
      return orgStr.replace(/&/g, '&amp;').replace(/>/g, '&gt;').replace(/"/g, '&quot;').replace(/</g, '&lt;').replace(/'/g, '&apos;');
    }
    return orgStr;
  }

  function getBasePrice(projectGLJID, tenderProject) {
    let glj = _.find(tenderProject.projectGLJ.datas.gljList, {
      id: projectGLJID
    })
    return glj ? gljUtil.getBasePrice(glj, null, null, null, decimalObj, false, _, scMathUtil) : 0;
  }



  function getFeeRate(programID, fieldName, tenderProject) {
    let rate = 0;
    let template = tenderProject.calcProgram.compiledTemplates;
    if (template[programID]) {
      let item = _.find(template[programID].calcItems, {
        fieldName: fieldName
      })
      if (item) rate = item.feeRate;
    }
    return rate;
  }

  function _billStrFilter(billStr) {
    let rst = billStr;
    if (typeof billStr === 'string') {
      rst = billStr.replace(reg1, '').replace(reg2, '').replace(reg3, '').replace(reg4, '').replace(reg5, '(').replace(reg6, ')');
    }
    return rst;
  }

  function _chkAdhocChapterBillCode(billStr) {
    let rst = false;
    rst = (typeof billStr === 'string' &&
      (billStr.indexOf('800章') >= 0 || billStr.indexOf('900章') >= 0 || billStr.indexOf('1000章') >= 0 || billStr.indexOf('1100章') >= 0 || billStr.indexOf('1200章') >= 0)
    )
    return rst;
  }

  function _extractAdhocChapter(billStr) {
    let rst = '';
    if (typeof billStr === 'string') {
      if (billStr.indexOf('800章') >= 0) {
        rst = '800';
      } else if (billStr.indexOf('900章') >= 0) {
        rst = '900';
      } else if (billStr.indexOf('1000章') >= 0) {
        rst = '1000';
      } else if (billStr.indexOf('1100章') >= 0) {
        rst = '1100';
      } else if (billStr.indexOf('1200章') >= 0) {
        rst = '1200';
      }
    }
    return rst;
  }

  function billNameChecking(bNode, projectName, fixedFlag) {
    let data = bNode.data;
    let fail = null;
    let pass = true;
    if (data.flagsIndex && data.flagsIndex.fixed) {
      let flag = data.flagsIndex.fixed.flag;
      switch (flag) {
        case fixedFlag.ONE_SEVEN_BILLS:
          // pass = data.name == "第100章至700章清单" || data.name == "第100章至700章清单合计";
          pass = typeof data.name === 'string' && data.name.includes('第100章至'); 
          break;
        case fixedFlag.PROVISIONAL_TOTAL:
          pass = data.name == "已包含在清单合计中的材料、工程设备、专业工程暂估价合计";
          break;
        case fixedFlag.BILLS_TOTAL_WT_PROV:
          pass = data.name == "清单合计减去材料、工程设备、专业工程暂估价合计";
          break;
        case fixedFlag.DAYWORK_LABOR:
          pass = data.name == "计日工合计";
          break;
        /*         case fixedFlag.LABOUR_SERVICE:
                  pass = data.name == "劳务";
                  break;
                case fixedFlag.MATERIAL:
                  pass = data.name == "材料";
                  break;
                case fixedFlag.CONSTRUCTION_MACHINE:
                  pass = data.name == "机械";
                  break; */
        case fixedFlag.PROVISIONAL:
          pass = data.name == "暂列金额(不含计日工总额)";
          break;
        case fixedFlag.TOTAL_COST:
          pass = data.name == "投标报价";
          break;
        case fixedFlag.ONE_HUNDRED_BILLS:
          // pass = data.name == "清单 第100章 总则";
          pass = _billStrFilter(data.name) == "清单第100章总则";
          break;
      }
    } else {
      if (bNode.parent) {
        const pdata = bNode.parent.data;
        if (pdata.flagsIndex && pdata.flagsIndex.fixed && pdata.flagsIndex.fixed.flag == fixedFlag.ONE_SEVEN_BILLS) {
          if (!sectionNameMap[_billStrFilter(data.name)]) {
            pass = _chkAdhocChapterBillCode(data.name);
          }
        }
      }
    }
    // if(pass == false)fail = { hint: `清单:"${data.name?data.name:""}",名字不符合规范！`, type: projectName } // 不检测了，有问题不管，2022-12-28与潘林QQ中立贴为证

    return fail;
  }

  /**
   *
   * @param {String} areaKey - 地区标识，如：'安徽@马鞍山'，有些地区的接口只是取值上有不同，共有一个接口脚本， 需要通过地区标识确定一些特殊处理
   * @param {Number} exportKind - 导出类型，招标、投标、控制价
   * @param {Object} projectData - 项目表数据：{ 建设项目Data, children: [单位工程...] }
   * @param {Object} tenderDetailMap - 单位工程ID与getData接口数据(projectObj.project的结构)的映射。
   * @return {Promise<Array>} - 返回的数据结构必须按照规定：[{ data, exportKind, fileName }]，参考web\building_saas\standard_interface\index.js中的注释说明
   */
  async function entry(areaKey, exportKind, projectData, tenderDetailMap) {
    const {
      CONFIG: {
        TYPE
      },
      UTIL,
      Element
    } = INTERFACE_EXPORT_BASE;

    const {
      isGLYun
    } = window.commonUtil;

    const {
      EXPORT_KIND: {
        BID_INVITATION,
        BID_SUBMISSION,
        CONTROL
      },
      fixedFlag,
    } = window.commonConstants;
    let cprjType = {
      1: "GCLQD", // 招标
      2: "TBBJ", // 投标
      3: "ZBKZJ", // 控制价
    }; // 默认是公路云的
    if (!isGLYun()) {
      // 养护云
      cprjType[1] = 'YHGCLQD';
      cprjType[2] = 'YHTBBJ';
      cprjType[3] = 'YHZBKZJ';
    }
    const isBidInvitation = exportKind === BID_INVITATION; // 是否是招标
    const isBidSubmission = exportKind === BID_SUBMISSION; // 是否是投标
    const isControl = exportKind === CONTROL; // 是否是控制价

    function emptyElement(name) {
      this.name = name;
      this.attrs = [];
      this.children = [];
    }

    // 建设项目根节点信息
    function CprjInfo(projectName) {
      const attrs = [{
        name: "CprjName",
        value: projectName,
      },
      {
        name: "CprjType",
        value: cprjType[exportKind],
      },
      ];
      Element.call(this, "CprjInfo", attrs);
    }
    // 项目基本信息
    function SystemInfo(projectData) {
      let baseInfo = _.find(projectData.property.basicInformation, {
        dispName: "基本信息",
      });
      //“招标工程量清单”、“招标控制价”时，输出该字段，为导出该文件的当前时间
      let makeData = {
        value: UTIL.getNowFormatTime(true)
      }

      //投标的时候取基本信息的makeData字段
      // if (isBidSubmission) makeData = _.find(baseInfo.items, { "key": "makeDate" }); 
      // 山东需求调整，取当前时间

      // 取编制软件序列号所属单位。读取项目属性-建设项目基本信息的“投标单位”字段。该字段需要模板中新增。等确定后再修改
      // let softwareNumHolder = _.find(baseInfo.items, { "key": "bidderName" });
      let softwareNumHolder = userCompany; // userCompany是在main界面上已经有现成的(类似userAccount, userID)
      let hardID = UTIL.generateHardwareId();
      let [cpuId, diskId, macId] = hardID.split(";");
      // const orgScretInfoStr = `SoftwareName=纵横公路工程造价管理软件,SoftwareVer=V${VERSION},SoftwareCompany=珠海纵横创新软件有限公司,SoftwareNumber=${userID},HardNumber=${diskId},MacAddress=${macId},SoftwareNumberHolder=${softwareNumHolder}`
      const orgScretInfoStr = `SoftwareName=纵横公路工程造价管理软件,SoftwareVer=V${VERSION},SoftwareCompany=珠海纵横创新软件有限公司,SoftwareNumber=${window.btoa(userID)},HardNumber=${window.btoa(diskId)},MacAddress=${window.btoa(macId)},SoftwareNumberHolder=${softwareNumHolder}`
      let scretInfo = sm3Digest(orgScretInfoStr);
      const attrs = [{
        name: "Name",
        value: "公路工程造价数据标准",
      },
      {
        name: "Version",
        value: "1.0",
      },
      {
        name: "SoftwareName",
        value: "纵横公路工程造价管理软件",
      },
      {
        name: "SoftwareVer",
        value: "V" + VERSION,
      },
      {
        name: "SoftwareCompany",
        value: "珠海纵横创新软件有限公司",
      },
      {
        name: "MakeDate",
        value: makeData ? makeData.value : "",
      },
      {
        name: "SoftwareNumber",
        value: window.btoa(userID),
      },
      {
        name: "HardNumber",
        value: window.btoa(diskId),
      },
      {
        name: "MacAddress",
        value: window.btoa(macId),
      },
      {
        name: "SoftwareNumberHolder",
        value: softwareNumHolder,
      },
      {
        name: "SecretInfo",
        value: scretInfo,
      },
      ];
      Element.call(this, "SystemInfo", attrs);
    }

    //造价依据
    function CostBasis() {
      // ItemStandardNo="GYSFX-000000-2018-86"
      const attrs = [{
        name: "MakeRuleNo",
        value: "GYSBB-000000-2018-86",
      },
      {
        name: "MakeRuleName",
        value: "公路工程建设项目概算预算编制办法",
      },
      {
        name: "ItemStandardNo",
        value: "GYSFX-000000-2018-86",
      },
      ];
      Element.call(this, "CostBasis", attrs);

      //定额库信息

      //to do 改成实际的值
      function NormLib() {
        const attrs = [{
          name: "NormLibNo",
          value: "YSDE-000000-2018-86",
        },
        {
          name: "NormLibName",
          value: "部颁公路工程预算定额(2018)",
        },
        {
          name: "Type",
          value: "ZDEK",
        },
        ];
        Element.call(this, "NormLib", attrs);
      }
      this.children.push(new NormLib());
    }

    function Rate(tenderProject, feeRateInfo, seirNo) {
      //RateNo="1" Name="纵横软件测试版本" RateLibNo="GYSFL-000000-2018-86"
      const attrs = [{
        name: "RateNo",
        value: seirNo,
      },
      {
        name: "Name",
        value: feeRateInfo.name,
      },
      {
        name: "RateLibNo",
        value: feeLibNoMap[feeRateInfo.libID],
      },
      ];
      Element.call(this, "Rate", attrs);

      let RateParams = new emptyElement("RateParams");
      let subRates = projectObj.project.FeeRate.getAllSubRates(feeRateInfo.rates);
      for (let s of subRates) {
        let sname = s.name.replace("(％)", "");
        sname = sname.replace("(%)", "");
        if (feeRateMap[sname]) {
          let value = "";
          if (s.editable) {
            let sel = _.find(s.optionList, {
              selected: true,
            });
            if (sel) {
              value = sel.name;
            } else if (gljUtil.isDef(s.value)) {
              value = s.value;
            }
          } else {
            value = _.findIndex(s.optionList, {
              selected: true,
            });
            if (value == -1) value = 0;
          }
          /*     if (sname == '利润') tenderProject.ProfitRate = value;
              if (sname == '税金') tenderProject.TaxRate = value; */
          RateParams.children.push(new RateParam(feeRateMap[sname], value));
        }
      }

      this.children.push(RateParams);

      function RateParam(RateTypeNo, RateParamNo) {
        //<RateParam RateTypeNo="DJSGZJFFL" RateParamNo="0" Ratio="100"/>
        const attrs = [{
          name: "RateTypeNo",
          value: RateTypeNo,
        },
        {
          name: "RateParamNo",
          value: RateParamNo,
        },
        {
          name: "Ratio",
          value: "100",
        },
        ];
        Element.call(this, "RateParam", attrs);
      }

      let RateValues = new emptyElement("RateValues");

      function RateValue(CostTypeNo, RateTypeNo, value) {
        const attrs = [{
          name: "CostTypeNo",
          value: CostTypeNo,
        },
        {
          name: "RateTypeNo",
          value: RateTypeNo,
        },
        {
          name: "RateValue",
          value: value,
        },
        ];
        Element.call(this, "RateValue", attrs);
      }

      let prefix = "";
      for (let r of feeRateInfo.rates) {
        if (!r.ParentID && feeRateMap[r.name]) prefix = feeRateMap[r.name];
        if (feeRateMap[r.name] && r.ParentID) {
          RateValues.children.push(new RateValue(prefix, feeRateMap[r.name], r.rate));
        }
      }

      this.children.push(RateValues);
    }

    function Pract(tpdata, seriNo) {
      let pgljData = tpdata.projectGLJ.datas;
      let decimalObj = tpdata.property.decimal;
      const attrs = [{
        name: "PractNo",
        value: seriNo,
      },
      {
        name: "Name",
        value: pgljData.constData.usedUnitPriceInfo.name,
      },
      ];
      Element.call(this, "Pract", attrs);

      let Param = {
        name: "Param",
        attrs: [{
          name: "TaxLibNo",
          value: "CCSBZ-440000-2019-544",
        },
        {
          name: "AuxRate",
          value: pgljData.constData.assistProductionFeeRate,
        },
        ],
        children: [],
      };
      if (isBidSubmission || isControl) { //导出到招标文件中，不输出这一部分。
        let elecDatas = electrovalenceObj.getElectrovalenceDatas(null, pgljData.com_electrovalence, pgljData.gljList);
        electrovalenceObj.calcPertElectrovalenceMarketPrice(elecDatas);
        for (let e of elecDatas) {
          let Electro = {
            name: "Electro",
            attrs: [{
              name: "Code",
              value: e.code,
            },
            {
              name: "Price",
              value: e.electPrice,
            },
            {
              name: "Ratio",
              value: e.coe,
            },
            ],
            children: [],
          };
          Param.children.push(Electro);
        }
      }


      this.children.push(Param);

      function Mp(g) {
        const attrs = [{
          name: "Code",
          value: g.code,
        },
        {
          name: "PractName",
          value: g.name,
        },
        {
          name: "Spec",
          value: g.specs,
        },
        {
          name: "Unit",
          value: g.unit,
        },
        {
          name: "BudgetPrice",
          value: g.priceInfo.tenderPrice,
        },
        {
          name: "NormPrice",
          value: g.priceInfo.basePrice,
        },
        {
          name: "IsAdd",
          value: g.unit_price.is_add,
        },
        ];
        Element.call(this, "Mp", attrs);
      }

      function Material(g) {
        const attrs = [{
          name: "Code",
          value: g.code,
        },
        {
          name: "PractName",
          value: g.name,
        },
        {
          name: "Spec",
          value: g.specs,
        },
        {
          name: "Unit",
          value: g.unit,
        },
        {
          name: "BudgetPrice",
          value: g.priceInfo.tenderPrice,
        },
        {
          name: "NormPrice",
          value: g.priceInfo.basePrice,
        },
        {
          name: "IsAdd",
          value: g.unit_price.is_add,
        },
        {
          name: "OrgPrice",
          value: g.unit_price.originalPrice ? g.unit_price.originalPrice : 0,
        },
        {
          name: "TransFee",
          value: g.unit_price.unitFreight ? g.unit_price.unitFreight : 0,
        },
        {
          name: "GwRate",
          value: g.unit_price.grossWeightCoe_n ? g.unit_price.grossWeightCoe_n : 0,
        },
        {
          name: "OffSiteLf",
          value: g.unit_price.offSiteTransportLossRate_n ? g.unit_price.offSiteTransportLossRate_n : 0,
        },
        {
          name: "OnSiteLf",
          value: 0,
        },
        {
          name: "LoadLf",
          value: g.unit_price.handlingLossRate_n ? g.unit_price.handlingLossRate_n : 0,
        },
        {
          name: "StoreRate",
          value: g.unit_price.purchaseStorageRate_n ? g.unit_price.purchaseStorageRate_n : 0,
        },
        {
          name: "PackageRecycleFee",
          value: g.unit_price.packageRecoverValue ? g.unit_price.packageRecoverValue : 0,
        },
        ];
        Element.call(this, "Material", attrs);
        // if (g.unit_price.calcMaterial == 1) { //有材料计算
        //   let index = gljUtil.getIndex(g);
        //   let orList = [];
        //   for (let o of pgljData.originalList) {
        //     if (o.connect_key == index) orList.push(new OrgPrices(o));
        //   }
        //   if (orList.length > 0) this.children = orList;
        // }

        function CostStructure(r) {
          //待获取
          this.name = "CostStructure";
          this.attrs = [];
          this.children = [];
        }

        function Consume(r, o) {
          this.name = "Consume";
          this.attrs = [];
          this.children = [];
          for (let g of o.ration_gljs) {
            if (g.rationID == r.ID) {
              let r_quantity = scMathUtil.roundForObj(r.quantity, tpdata.property.decimal.ration.quantity);
              this.children.push(new ConsumeItem(g, r_quantity));
            }
          }
        }

        function ConsumeItem(g, ration_quantity) {
          const attrs = [{
            name: "Code", //待获取
            value: g.code,
          },
          {
            name: "Consumption",
            value: scMathUtil.roundForObj(ration_quantity * parseFloat(g.quantity), tpdata.property.decimal.glj.quantity),
          },
          ];
          Element.call(this, "ConsumeItem", attrs);
        }

        function Norm(r, o) {
          const attrs = [{
            name: "NormLibNo", //待获取
            value: "",
          },
          {
            name: "DisplayCode",
            value: r.code,
          },
          {
            name: "Name",
            value: r.name,
          },
          {
            name: "Unit",
            value: r.unit,
          },
          {
            name: "Num",
            value: r.quantity,
          },
          {
            name: "CostTypeNo",
            value: "", //待获取
          },
          {
            name: "FabricationCost", //待获取
            value: "",
          },
          {
            name: "AdjustStatus",
            value: "",
          },
          ];
          Element.call(this, "Norm", attrs);
          this.children.push(new CostStructure(r));
          this.children.push(new Consume(r, o));
        }

        function SelfCollect(o) {
          const attrs = [{
            name: "OtherCost",
            value: 0,
          },];
          Element.call(this, "SelfCollect", attrs);
          for (let r of o.rations) {
            this.children.push(new Norm(r, o));
          }
        }

        function OrgPrices(o) {
          const attrs = [{
            name: "OrgPricevalue",
            value: o.supplyPrice,
          },
          {
            name: "Ratio",
            value: o.coe,
          },
          ];

          Element.call(this, "OrgPrices", attrs);
          if (!o.rations) return;
          this.children.push(new SelfCollect(o));
        }
      }

      function Mech(g, gljKeyMap) {
        const attrs = [{
          name: "Code",
          value: g.code,
        },
        {
          name: "PractName",
          value: g.name,
        },
        {
          name: "Spec",
          value: g.specs,
        },
        {
          name: "Unit",
          value: g.unit,
        },
        {
          name: "BudgetPrice",
          value: g.priceInfo.tenderPrice,
        },
        {
          name: "NormPrice",
          value: g.priceInfo.basePrice,
        },
        {
          name: "IsAdd",
          value: g.unit_price.is_add,
        },
        ];
        Element.call(this, "Mech", attrs);
        let FixedCostItems = [];
        let fcsum = 0;
        let VariableCostItems = [];
        let vcsum = 0;
        if (g.ratio_data && g.ratio_data.length > 0) {
          for (let ratio of g.ratio_data) {
            let rIndex = gljUtil.getIndex(ratio);
            let rglj = gljKeyMap[rIndex];
            let ts = scMathUtil.roundForObj(parseFloat(ratio.consumption) * rglj.priceInfo.tenderPrice, decimalObj.glj.unitPrice);
            if (FixedCostMap[ratio.name]) {
              FixedCostItems.push(new FixedCostItem(ratio));
              fcsum = scMathUtil.roundForObj(fcsum + ts, decimalObj.glj.unitPrice);
            } else {
              VariableCostItems.push(new VariableCostItem(ratio));
              vcsum = scMathUtil.roundForObj(vcsum + ts, decimalObj.glj.unitPrice);
            }
          }
        }


        if (FixedCostItems.length > 0) {
          let fc = new FixedCost(fcsum);
          fc.children = FixedCostItems;
          this.children.push(fc);
        }

        if (VariableCostItems.length > 0) {
          let vc = new VariableCost(vcsum);
          vc.children = VariableCostItems;
          this.children.push(vc);
        }

        function VariableCost(sum) {
          const attrs = [{
            name: "VariableCostSum",
            value: sum,
          }];
          Element.call(this, "VariableCost", attrs);
        }

        function VariableCostItem(item) {
          const attrs = [{
            name: "VariableCostNo",
            value: item.code,
          }, {
            name: "Consumption",
            value: item.consumption,
          }]
          Element.call(this, "VariableCostItem", attrs);
        }

        function FixedCost(sum) {
          const attrs = [{
            name: "FixedCostSum",
            value: sum,
          }, {
            name: "FixedRate",
            value: 1,
          }];
          Element.call(this, "FixedCost", attrs);
        }

        function FixedCostItem(item) {
          const attrs = [{
            name: "FixedCostNo",
            value: ratioCodeMap[item.code],
          }, {
            name: "Sum",
            value: item.consumption,
          }]
          Element.call(this, "FixedCostItem", attrs);

        }
      }

      let Mps = new emptyElement("Mps");
      let Materials = new emptyElement("Materials");
      let Mechs = new emptyElement("Mechs");
      let gljKeyMap = {};
      let temMechs = [];
      if (isBidSubmission || isControl) { //导出到招标文件中，不输出这一部分。
        for (let g of pgljData.gljList) {
          if (!g.quantity) {
            continue;
          }
          let type = g.type + "";
          gljKeyMap[gljUtil.getIndex(g)] = g;
          type = type.charAt(0);
          if (type == "1") {
            Mps.children.push(new Mp(g));
          } else if (type == "2" || type == 5) {
            Materials.children.push(new Material(g));
          } else if (type == "3") {
            temMechs.push(g);
          }
        }
        for (let t of temMechs) {
          Mechs.children.push(new Mech(t, gljKeyMap));
        }
      }
      this.children.push(Mps);
      this.children.push(Materials);
      this.children.push(Mechs);
    }

    function EprjInfo(tenderProject) {
      let bills = tenderProject.Bills.datas;
      let feature = tenderProject.property.projectFeature ? tenderProject.property.projectFeature : [];
      let totalItem = null;
      let proItem = null; //暂列金额项
      let safeItem = null;
      let oneToSevenItem = null;
      for (let b of bills) {
        if (b.flagsIndex && b.flagsIndex.fixed && b.flagsIndex.fixed.flag == fixedFlag.TOTAL_COST) totalItem = b;
        if (b.flagsIndex && b.flagsIndex.fixed && b.flagsIndex.fixed.flag == fixedFlag.PROVISIONAL) proItem = b;
        if (b.flagsIndex && b.flagsIndex.fixed && b.flagsIndex.fixed.flag == fixedFlag.ONE_SEVEN_BILLS) oneToSevenItem = b;
        if (b.code == "102-3" && b.name == "安全生产费") safeItem = b;
      }

      const attrs = [{
        name: "Name",
        value: tenderProject.projectInfo.name,
      },
      {
        name: "Sums",
        value: totalItem.feesIndex && totalItem.feesIndex.common && totalItem.feesIndex.common.tenderTotalFee ? totalItem.feesIndex.common.tenderTotalFee : 0,
      },
      ];
      //输出控制价、投标文件时，取调价后的标段总造价。
      //输出招标文件时，取0
      if (isBidInvitation) attrs[1].value = 0;
      Element.call(this, "EprjInfo", attrs);
      this.children.push(new SummaryOfCost(totalItem, proItem, safeItem, oneToSevenItem, feature));
      this.children.push(new MakeInfo(tenderProject));
      this.children.push(new Params(tenderProject));
      const cacheForFormula = _preCodeingForBills(tenderProject);
      this.children.push(new getBillsItems(tenderProject, cacheForFormula));
      this.children.push(new getIndexs(tenderProject));
      let bidEvaluationMainMaterials = getBidEvaluationMainMaterial(tenderProject);
      if (bidEvaluationMainMaterials.length > 0) this.children.push(...bidEvaluationMainMaterials);

      //山东接口还需要增加几个表的数据（就是把原报表的显示数据转到投标文件里）
      // 1. 投标报价汇总表
      this.children.push(new quoteSummary(tenderProject));
      // 2. 计日工表
      let spdw = sporadicWork(tenderProject);
      if (spdw) {
        this.children.push(spdw);
      }
      // 3. 材料暂估价表
      let estMaterialRpt = materialEstimate(tenderProject);
      if (estMaterialRpt) {
        this.children.push(estMaterialRpt);
      }
      // 4. 工程设备暂估价表
      let estMachineRpt = getMachineTempEst(tenderProject);
      if (estMachineRpt) {
        this.children.push(estMachineRpt);
      }
      // 5. 专业工程暂估价表
      let estSpecPrjRpt = getSpecPrjEst(tenderProject);
      if (estSpecPrjRpt) {
        this.children.push(estSpecPrjRpt);
      }
      // 6. 工程量清单单价分析表
      let billAnalyzeRpt = getBillsAnalyze(tenderProject);
      if (billAnalyzeRpt) {
        this.children.push(billAnalyzeRpt);
      }
    }

    function _getBidGljCode(tenderProject, orgGlj) {
      let rst = orgGlj.code;
      if (tenderProject.bid_evaluation_list && tenderProject.bid_evaluation_list.datas) {
        for (let bGlj of tenderProject.bid_evaluation_list.datas) {
          if (bGlj.projectGLJID === orgGlj.id) {
            rst = bGlj.seq;
            break;
          }
        }
      }
      return rst;
    }

    function _getFee(bill, key = 'common', valueKey = 'tenderTotalFee') {
      let rstSum = 0;
      if (bill) {
        let dtlB = (bill.data) ? bill.data : bill;
        if (dtlB.fees) {
          for (let fee of dtlB.fees) {
            if (fee.fieldName === key) {
              rstSum = fee[valueKey];
              break;
            }
          }
        }
      }
      return rstSum;
    };

    function _getNumValueByExportKind(orgSum) {
      let rst = orgSum;
      // const isBidInvitation = exportKind === BID_INVITATION; // 是否是招标
      // const isBidSubmission = exportKind === BID_SUBMISSION; // 是否是投标
      // const isControl = exportKind === CONTROL; // 是否是控制价
      //根据导出类型（上面3个），输出实际合计或price
      if (isBidInvitation) {
        rst = 0;
      }
      return rst;
    }

    function _getStrValueByExportKind(orgStr) {
      let rst = orgStr;
      // const isBidInvitation = exportKind === BID_INVITATION; // 是否是招标
      // const isBidSubmission = exportKind === BID_SUBMISSION; // 是否是投标
      // const isControl = exportKind === CONTROL; // 是否是控制价
      //根据导出类型（上面3个），输出实际合计或price
      if (isBidInvitation) {
        rst = '';
      }
      return rst;
    }

    function _getFixedSum(tenderProject) {
      let rst = 0;
      tenderProject.Bills.datas.forEach((bill) => {
        if (bill.specialProvisional == "固定费用") {
          let bVal = _getFee(bill);
          rst += bVal;
        }
      });
      return rst;
    }

    function quoteSummary(tenderProject) {
      let quoteSummaryItem = new emptyElement('QuoteSummary');
      // let attrs = [];
      //1. 取固定清单，
      // 1.1 100~700章总清单(flags有属性为19的那个) -> topNode100To700
      // 1.2 已包含在清单合计中的材料、工程设备、专业工程暂估价合计 标记：20
      // 1.3 清单合计减去材料、工程设备、专业工程暂估价|合计 标记：21
      // 1.4 计日工合计 标记：22
      // 1.5 暂列金额(不含计日工总额) 标记：26
      // 1.6 投标报价 标记：9
      let topNode100To700, nodeZXZDJ, nodeQDKCZXZDJ, nodeJRG, nodeZLJE, nodeTBBJ, newAddedBill;
      let chapterNodes = [];
      let fixedSum = _getFixedSum(tenderProject); //山东有固定费用，此费用不参与到此项中去
      let nextBillID = '';
      tenderProject.Bills.datas.forEach((bill) => {
        if (bill.flags && bill.flags.length > 0) {
          for (let flag of bill.flags) {
            switch (flag.flag) {
              case 19:
                topNode100To700 = bill;
                break;
              case 20:
                nodeZXZDJ = bill;
                break;
              case 21:
                nodeQDKCZXZDJ = bill;
                break;
              case 22:
                nodeJRG = bill;
                break;
              case 26:
                nodeZLJE = bill;
                nextBillID = bill.NextSiblingID
                break;
              case 9:
                nodeTBBJ = bill;
                break;
              case 44:
                newAddedBill = bill;
                break;
              default:
                break;
            }
          }
        }
      });
      tenderProject.Bills.datas.forEach((bill) => {
        if (bill.type === 1 && bill.ID === nextBillID && nodeTBBJ && nodeTBBJ.ID !== nextBillID) {
          newAddedBill = bill;
        }
      });

      //2. 然后获取topNode100To700下的所有次一级清单(100章...700章)
      if (topNode100To700) {
        for (let rootBill of tenderProject.Bills.tree.roots) {
          // 100~700章总清单在top级别（山东养护）
          if (rootBill.data.ID === topNode100To700.ID) {
            rootBill.children.forEach((subBill) => {
              if (subBill.data.name.includes('00章')) {
                chapterNodes.push(subBill);
              }
            });
            break;
          }
        }
      }
      //3. 拼凑数据
      let nodeAttrs = [];
      if (topNode100To700) {
        let order = 1;
        //读取投标报价汇总表信息。1.ItemNo 序号。2.ChapterNo 章次。 3.Name 科目名称。 4.Sum 金额。
        chapterNodes.forEach((cnode) => {
          if (_chkIfValid100(cnode)) {
            let chapterIdx = cnode.data.name.indexOf("00章");
            let chpNoStr = '';
            const ch = cnode.data.name.substr(chapterIdx - 2, 2);
            if (isNaN(parseFloat(ch))) {
              chpNoStr = cnode.data.name.substr(chapterIdx - 1, 3);
            } else {
              chpNoStr = cnode.data.name.substr(chapterIdx - 2, 4);
            }
            // nodeAttrs.push({ ItemNo: order, ChapterNo: cnode.data.name.substr(chapterIdx - 1, 3), Name: cnode.data.name, Sum: _getFee(cnode) });
            nodeAttrs.push({ ItemNo: order, ChapterNo: chpNoStr, Name: cnode.data.name, Sum: _getFee(cnode) });
            order++;
          }
        });
        // nodeAttrs.push({ ItemNo: order, ChapterNo: '', Name: '第100章至700章清单合计', Sum: _getFee(topNode100To700) });
        nodeAttrs.push({ ItemNo: order, ChapterNo: '', Name: topNode100To700.name, Sum: _getFee(topNode100To700) });
        order++;
        if (nodeZXZDJ) {
          // nodeAttrs.push({ItemNo: order, ChapterNo: '', Name: '已包含在清单合计中的材料、工程设备、专业工程暂估价合计', Sum: _getFee(nodeZXZDJ) - fixedSum});
          nodeAttrs.push({ ItemNo: order, ChapterNo: '', Name: '已包含在清单合计中的材料、工程设备、专业工程暂估价合计', Sum: _getFee(nodeZXZDJ) }); // 又不需要fixedSum了
          order++;
        }
        if (nodeQDKCZXZDJ) {
          nodeAttrs.push({ ItemNo: order, ChapterNo: '', Name: `清单合计减去材料、工程设备、专业工程暂估价合计(即${order - 2}-${order - 1})=${order}`, Sum: _getFee(nodeQDKCZXZDJ) });
          order++;
        }
        if (nodeJRG) {
          nodeAttrs.push({ ItemNo: order, ChapterNo: '', Name: `计日工合计`, Sum: _getFee(nodeJRG) });
          order++;
        }
        if (nodeZLJE) {
          nodeAttrs.push({ ItemNo: order, ChapterNo: '', Name: `暂列金额(不含计日工总额)`, Sum: _getFee(nodeZLJE) });
          order++;
        }
        if (newAddedBill) {
          nodeAttrs.push({ ItemNo: order, ChapterNo: '', Name: newAddedBill.name, Sum: _getFee(newAddedBill) });
          order++;
        }
        if (nodeTBBJ) {
          let nameStr = `投标报价(${chapterNodes.length + 1}+${order - 2}+${order - 1})=${order}`;
          if (newAddedBill && nodeTBBJ.calcBase && nodeTBBJ.calcBase.includes(newAddedBill.ID)) {
            nameStr = `投标报价(${chapterNodes.length + 1}+${order - 3}+${order - 2}+${order - 1})=${order}`;
          }
          nodeAttrs.push({ ItemNo: order, ChapterNo: '', Name: nameStr, Sum: _getFee(nodeTBBJ) });
          order++;
        }
      }
      function _Item(item) {
        const attrs = [
          {
            name: 'ItemNo',
            value: item.ItemNo
          },
          {
            name: 'ChapterNo',
            value: item.ChapterNo
          },
          {
            name: 'Name',
            value: item.Name
          },
          {
            name: 'Sum',
            value: scMathUtil.roundForObj(_getNumValueByExportKind(item.Sum), tenderProject.property.decimal.bills.totalPrice)
            // value: 0 // 所有清单的金额都是0
          }
        ];
        let rst = new emptyElement('Item');
        rst.attrs.push(...attrs);
        return rst;
      }
      for (let attr of nodeAttrs) {
        quoteSummaryItem.children.push(_Item(attr));
      }
      return quoteSummaryItem;
    }

    function sporadicWork(tenderProject) {
      //计日工表，含：劳务、材料、施工机械、计日工汇总
      let hasSporadicWork = false;
      let sporadicWorkItem = new Element('SporadicWork');
      let nodeLabour, nodeMaterial, nodeMachine;
      //首先收集过滤计日工相关清单
      tenderProject.Bills.datas.forEach((bill) => {
        if (bill.flags && bill.flags.length > 0) {
          for (let flag of bill.flags) {
            switch (flag.flag) {
              case 23:
                nodeLabour = bill;
                break;
              case 24:
                nodeMaterial = bill;
                break;
              case 25:
                nodeMachine = bill;
                break;
              default:
                break;
            }
          }
        }
      });
      const _buildWorkNodeItem = function (orgNode, subNodes, parentKey, childKey) {
        let parentNode = new Element(parentKey);
        sporadicWorkItem.children.push(parentNode);
        const pSumAttrs = [
          {
            name: 'Sum',
            value: _getNumValueByExportKind(_getFee(orgNode))
            // value: 0
          }
        ];
        // Element.call(this, parentKey, pSumAttrs);
        parentNode.attrs.push(...pSumAttrs);
        subNodes.forEach((node, index) => {
          let childNode = new Element(childKey);
          parentNode.children.push(childNode);
          const attrs = [
            {
              name: 'ItemNo',
              value: (node.code) ? node.code : `${index + 1}`
            }, {
              name: 'Name',
              value: node.name
            }, {
              name: 'Unit',
              value: node.unit
            }, {
              name: 'Num',
              value: node.quantity
            }, {
              name: 'Price',
              value: _getNumValueByExportKind(_getFee(node, 'common', 'tenderUnitFee'))
              // value: 0
            }, {
              name: 'Sum',
              value: _getNumValueByExportKind(_getFee(node))
              // value: 0
            }
          ];
          childNode.attrs.push(...attrs);
        });
      };
      //1. 判断劳务
      if (nodeLabour) {
        let subNodes = [];
        tenderProject.Bills.datas.forEach((bill) => {
          if (bill.ParentID === nodeLabour.ID) {
            subNodes.push(bill);
          }
        });
        if (subNodes.length > 0) {
          hasSporadicWork = true;
          //创建劳务Mps节点及劳务Mps下Mp子节点
          _buildWorkNodeItem(nodeLabour, subNodes, 'Mps', 'Mp');
        }
      }
      //2. 判断材料
      if (nodeMaterial) {
        let subNodes = [];
        tenderProject.Bills.datas.forEach((bill) => {
          if (bill.ParentID === nodeMaterial.ID) {
            subNodes.push(bill);
          }
        });
        if (subNodes.length > 0) {
          hasSporadicWork = true;
          //创建材料Materials节点及劳务Materials下Material子节点
          _buildWorkNodeItem(nodeMaterial, subNodes, 'Materials', 'Material');
        }
      }
      //3. 判断施工机械
      if (nodeMachine) {
        let subNodes = [];
        tenderProject.Bills.datas.forEach((bill) => {
          if (bill.ParentID === nodeMachine.ID) {
            subNodes.push(bill);
          }
        });
        if (subNodes.length > 0) {
          hasSporadicWork = true;
          //创建施工机械Meehs节点及劳务Meehs下Meeh子节点
          _buildWorkNodeItem(nodeMachine, subNodes, 'Mechs', 'Mech');
        }
      }
      //4. 判断计日工汇总
      if (hasSporadicWork) {
        let summaryNode = new Element('Summary');
        sporadicWorkItem.children.push(summaryNode);
        const pSumAttrs = [
          {
            name: 'Sum',
            // value: _getFee(nodeLabour) + _getFee(nodeMaterial) + _getFee(nodeMachine)
            value: _getNumValueByExportKind(_getFee(nodeLabour) + _getFee(nodeMaterial) + _getFee(nodeMachine))
          }
        ];
        summaryNode.attrs = pSumAttrs;
        //把劳务、材料、施工机械
        function _workItem(node, name, remark = '') {
          let childNode = new Element('Item');
          summaryNode.children.push(childNode);
          const attrs = [
            {
              name: "Name",
              value: name,
            },
            {
              name: "Sum",
              value: _getNumValueByExportKind(_getFee(node)),
            },
            {
              name: "Remark",
              value: remark,
            }
          ]
          childNode.attrs.push(...attrs);
        }
        _workItem(nodeLabour, '劳务');
        _workItem(nodeMaterial, '材料');
        _workItem(nodeMachine, '机械');
      }
      //返回
      if (hasSporadicWork) {
        return sporadicWorkItem;
      } else {
        return null;
      }
    }

    function materialEstimate(tenderProject) {
      let mEstNode = new emptyElement('MaterialEstimate');
      let items = [];
      let billItems = [];
      let itemNo = 1;
      //材料暂估价明细
      tenderProject.Bills.datas.forEach((bill) => {
        if (bill.specialProvisional === '材料暂估') {
          billItems.push(bill);
        }
      });
      if (billItems.length > 0) {
        billItems.forEach((bill) => {
          let mEstItemNode = new emptyElement('Item');
          mEstNode.children.push(mEstItemNode);
          let attrs = [
            { name: 'ItemNo', value: itemNo },
            { name: 'Code', value: bill.code },
            { name: 'Number', value: bill.code },
            { name: 'Name', value: bill.name },
            { name: 'Unit', value: bill.unit },
            { name: 'Num', value: bill.quantity },
            { name: 'Price', value: _getNumValueByExportKind(_getFee(bill, 'common', 'tenderUnitFee')) },
            { name: 'Sum', value: _getNumValueByExportKind(scMathUtil.roundForObj(_getFee(bill), 0)), type: TYPE.DECIMAL },
            // {name: 'Price', value: 0},
            // {name: 'Sum', value: 0},
            { name: 'Remark', value: (bill.remark) ? bill.remark : '' }
          ];
          itemNo++;
          mEstItemNode.attrs.push(...attrs);
        });
      }
      tenderProject.projectGLJ.datas.gljList.forEach((glj) => {
        if (glj.is_evaluate && glj.type !== 5 && glj.type !== 301) {
          items.push(glj);
        }
      });
      if (items.length > 0) {
        items.forEach((glj) => {
          let mEstItemNode = new emptyElement('Item');
          mEstNode.children.push(mEstItemNode);
          let gljName = glj.name;
          if (tenderProject.evaluate_list.datas && tenderProject.evaluate_list.datas.length > 0) {
            for (let relGlj of tenderProject.evaluate_list.datas) {
              if (relGlj.projectGLJID == glj.id) {
                gljName = relGlj.name;
                break;
              }
            }
          }
          let attrs = [
            { name: 'ItemNo', value: itemNo },
            { name: 'Code', value: _getBidGljCode(tenderProject, glj) },
            { name: 'Number', value: glj.code },
            { name: 'Name', value: gljName },
            { name: 'Unit', value: glj.unit },
            { name: 'Num', value: glj.tenderQuantity },
            // {name: 'Price', value: _getNumValueByExportKind(glj.unit_price.market_price)},
            { name: 'Price', value: glj.unit_price.market_price }, //暂估材料输出price，不需判断导出类型
            { name: 'Sum', value: _getNumValueByExportKind(scMathUtil.roundForObj(glj.tenderQuantity * glj.unit_price.market_price, 0)), type: TYPE.DECIMAL },
            // {name: 'Price', value: 0},
            // {name: 'Sum', value: 0},
            { name: 'Remark', value: (glj.remark) ? glj.remark : '' }
          ];
          itemNo++;
          mEstItemNode.attrs.push(...attrs);
        });
      }
      if (billItems.length > 0 || items.length > 0) {
        return mEstNode;
      } else {
        return null;
      }
    }

    function getMachineTempEst(tenderProject) {
      let mEstNode = new emptyElement('PrjDeviceEstimate');
      let items = [];
      let billItems = [];
      let itemNo = 1;
      //工程设备明细
      tenderProject.Bills.datas.forEach((bill) => {
        console.log(`bill.specialProvisional: ${bill.specialProvisional}`);
        if (bill.specialProvisional === '工程设备') {
          billItems.push(bill);
        }
      });
      if (billItems.length > 0) {
        billItems.forEach((bill) => {
          let mEstItemNode = new emptyElement('Item');
          mEstNode.children.push(mEstItemNode);
          let attrs = [
            { name: 'ItemNo', value: itemNo },
            { name: 'Code', value: bill.code },
            { name: 'Number', value: bill.code },
            { name: 'Name', value: bill.name },
            { name: 'Unit', value: bill.unit },
            { name: 'Num', value: bill.quantity },
            { name: 'Price', value: _getNumValueByExportKind(_getFee(bill, 'common', 'tenderUnitFee')) },
            { name: 'Sum', value: _getNumValueByExportKind(scMathUtil.roundForObj(_getFee(bill), 0)), type: TYPE.DECIMAL },
            // {name: 'Price', value: 0},
            // {name: 'Sum', value: 0},
            { name: 'Remark', value: (bill.remark) ? glj.remark : '' }
          ];
          itemNo++;
          mEstItemNode.attrs.push(...attrs);
        });
      }
      tenderProject.projectGLJ.datas.gljList.forEach((glj) => {
        if (glj.is_evaluate && glj.type === 5) {
          items.push(glj);
        }
      });
      if (items.length > 0) {
        items.forEach((glj, sno) => {
          let mEstItemNode = new emptyElement('Item');
          mEstNode.children.push(mEstItemNode);
          let attrs = [
            { name: 'ItemNo', value: itemNo },
            { name: 'Code', value: _getBidGljCode(tenderProject, glj) },
            { name: 'Number', value: glj.code },
            { name: 'Name', value: glj.name },
            { name: 'Unit', value: glj.unit },
            { name: 'Num', value: glj.tenderQuantity },
            // {name: 'Price', value: _getNumValueByExportKind(glj.unit_price.market_price)},
            { name: 'Price', value: glj.unit_price.market_price }, // 暂估设备直接输出price
            { name: 'Sum', value: _getNumValueByExportKind(scMathUtil.roundForObj(glj.tenderQuantity * glj.unit_price.market_price, 0)), type: TYPE.DECIMAL },
            // {name: 'Price', value: 0},
            // {name: 'Sum', value: 0},
            { name: 'Remark', value: (glj.remark) ? glj.remark : '' }
          ];
          itemNo++;
          mEstItemNode.attrs.push(...attrs);
        });
      }
      if (billItems.length > 0 || items.length > 0) {
        return mEstNode;
      } else {
        return null;
      }
    }

    function getSpecPrjEst(tenderProject) {
      let mEstNode = new emptyElement('SpecPrjEstimate');
      let sum = 0;
      let items = [];
      //专业工程暂估明细
      tenderProject.Bills.datas.forEach((bill) => {
        if (bill.specialProvisional === '专业工程') {
          items.push(bill);
        }
      });
      if (items.length > 0) {
        items.forEach((bill, sno) => {
          let mEstItemNode = new emptyElement('Item');
          mEstNode.children.push(mEstItemNode);
          let ttl = _getFee(bill);
          sum += ttl;
          let jobContent = '';
          if (bill.jobContent && bill.jobContent.length > 0) {
            jobContent = bill.jobContent.toString();
          } else {
            jobContent = (bill.jobContentText) ? bill.jobContentText : '';
          }
          jobContent = jobContent.replace(regRt1, '&#xA;').replace(regRt2, '&#xA;').replace(reg1, '&#xA;').replace(reg2, '&#xA;'); // 转成XML的换行转义符
          let attrs = [
            { name: 'ItemNo', value: sno + 1 },
            { name: 'Code', value: bill.code },
            { name: 'Number', value: bill.code },
            { name: 'Name', value: bill.name },
            { name: 'Content', value: jobContent },
            // {name: 'Sum', value: _getNumValueByExportKind(scMathUtil.roundForObj(ttl, 0)), type:TYPE.DECIMAL},
            { name: 'Sum', value: ttl, type: TYPE.DECIMAL },
            // {name: 'Sum', value: 0, type:TYPE.DECIMAL},
          ];
          mEstItemNode.attrs.push(...attrs);
        });
        mEstNode.attrs.push({ name: 'Sum', value: sum });
        return mEstNode;
      } else {
        return null;
      }
    }

    function getBillsAnalyze(tenderProject) {
      if (isBidInvitation) return null; // 招标不输出此部分
      // 本函数是尽量复刻【5.5表】工程量清单单价分析表的‘综合’计算式脚本的相关逻辑，具体细节根据实际环境有所调整（前端环境已有不少现成的结构及数据，能少跑不少逻辑）
      let djfxbNode = new emptyElement('ListUnitPriceAnalysis');
      let decimalObj = tenderProject.property.decimal;
      // 工程量清单单价分析(100~700章 清单下所有定额工料机的综合)
      let topNode100To700;
      let sno = 1;
      const prefix = '_';
      let filterMtlTypes = [202, 203, 204, 301];
      for (let bill of tenderProject.Bills.datas) {
        if (bill.flags && bill.flags.length > 0) {
          for (let flag of bill.flags) {
            if (flag.flag === 19) {
              for (let rootBill of tenderProject.Bills.tree.roots) {
                if (rootBill.data.ID === bill.ID) {
                  topNode100To700 = rootBill;
                  break;
                }
              }
              break;
            }
          }
        }
      }
      const cacheObj = {};
      const proKeysArr = [];
      const addedGljCodeCache = {};
      //说明：根据实际情况，用户会直接在清单下加工料机，此工料机属于定额层次，那么算工程量的时候要加上这个（沟通后这种几率很小，暂时返回0，如有再补上）
      const _getAdhocGljQty = function (billsId, rationCode, rstType = 1) {
        let rst = 0;
        // for (let nbidx = 0; nbidx < newRBillsIdArr.length; nbidx++) {
        //   if (newRBillsIdArr[nbidx] === billsId && newRCodeArr[nbidx] === rationCode) {
        //     rst = (rstType === 1) ? newRQtyArr[nbidx] : newTtlArr[nbidx];
        //     break;
        //   }
        // }
        return rst;
      };

      const _getCacheObjInitialedItem = function (bill = null, glj = null) {
        let rst = {
          code: (bill) ? bill.code : ((glj) ? glj.code : ''),
          name: (bill) ? bill.name : ((glj) ? glj.name : ''),
          quantity: (bill) ? bill.quantity : 1,
          labourConsume: 0,
          labourUnitPrice: 0,
          labourTotalPrice: 0,
          mainMaterialFee: 0,
          auxiliaryMaterialFee: 0,
          materialUnitFee: (bill) ? _getFee(bill, 'marketMaterial', 'unitFee') : 0,
          machineFee: (bill) ? _getFee(bill, 'marketMachine') : 0,
          otherFee: (bill) ? _getFee(bill, 'measure') : 0, //措施费
          managementFee: (bill) ? (_getFee(bill, 'manage') + _getFee(bill, 'force')) : 0, //管理+规费
          taxFee: (bill) ? _getFee(bill, 'tax') : 0,
          profitFee: (bill) ? _getFee(bill, 'profit') : 0,
          unitPrice: (bill) ? _getFee(bill, 'common', 'unitFee') : 0,
          items: []
        };
        return rst;
      };
      const _getPrjGLJ = function (gljID) {
        let rst = null;
        for (let glj of tenderProject.projectGLJ.datas.gljList) {
          if (glj.id === gljID) {
            rst = glj;
            break;
          }
        }
        return rst;
      };
      const _getRation = function (rationId) {
        let rst = null;
        for (let ration of tenderProject.Ration.datas) {
          if (ration.ID === rationId) {
            rst = ration;
            break;
          }
        }
        return rst;
      };
      const _createNode = function (billIdKey, bill) {
        if (cacheObj[billIdKey]) {
          //1. 叶子清单，先创建清单Item
          let bQtn = 1;
          if (bill.data.hasOwnProperty('quantity')) {
            bQtn = parseFloat(bill.data.quantity);
            if (isNaN(bQtn)) bQtn = 1;
          }
          let billMainMaterialTtl = cacheObj[billIdKey].mainMaterialFee / bQtn;
          let billAuxiliaryMaterialTtl = cacheObj[billIdKey].auxiliaryMaterialFee / bQtn;
          // scMathUtil.roundForObj(cacheObj[billIdKey].labourConsume / bQtn, decimalObj.glj.unitPrice)
          let leafBillAttrs = [
            { name: 'ItemNo', value: sno },
            { name: 'Code', value: cacheObj[billIdKey].code },
            { name: 'Name', value: getXMLTransitCharacters(cacheObj[billIdKey].name) },
            { name: 'LaborWorkDays', value: _getNumValueByExportKind(scMathUtil.roundForObj(cacheObj[billIdKey].labourConsume / bQtn, decimalObj.glj.quantity)) },
            { name: 'LaborUnitPrice', value: _getNumValueByExportKind(scMathUtil.roundForObj(cacheObj[billIdKey].labourUnitPrice, decimalObj.glj.unitPrice)) },
            { name: 'LaborUnitTotal', value: _getNumValueByExportKind(scMathUtil.roundForObj(cacheObj[billIdKey].labourTotalPrice / bQtn, decimalObj.glj.unitPrice)) },
            { name: 'MainMaterialConsume', value: 0 },
            { name: 'MainMaterialUnit', value: '' },
            { name: 'MainMaterialUnitPrice', value: 0 },
            { name: 'MainMaterialTotal', value: _getNumValueByExportKind(scMathUtil.roundForObj(billMainMaterialTtl, decimalObj.glj.unitPrice)) },
            { name: 'AuxiliaryMaterialFee', value: _getNumValueByExportKind(scMathUtil.roundForObj(billAuxiliaryMaterialTtl, decimalObj.glj.unitPrice)) },
            { name: 'MaterialSum', value: _getNumValueByExportKind(scMathUtil.roundForObj(billMainMaterialTtl + billAuxiliaryMaterialTtl, decimalObj.glj.unitPrice)) },
            { name: 'MachUsageFee', value: _getNumValueByExportKind(scMathUtil.roundForObj(cacheObj[billIdKey].machineFee / bQtn, decimalObj.glj.unitPrice)) },
            { name: 'OtherFee', value: _getNumValueByExportKind(scMathUtil.roundForObj(cacheObj[billIdKey].otherFee / bQtn, decimalObj.glj.unitPrice)) },
            { name: 'ManageFee', value: _getNumValueByExportKind(scMathUtil.roundForObj(cacheObj[billIdKey].managementFee / bQtn, decimalObj.glj.unitPrice)) },
            { name: 'Tax', value: _getNumValueByExportKind(scMathUtil.roundForObj(cacheObj[billIdKey].taxFee / bQtn, decimalObj.glj.unitPrice)) },
            { name: 'Profit', value: _getNumValueByExportKind(scMathUtil.roundForObj(cacheObj[billIdKey].profitFee / bQtn, decimalObj.glj.unitPrice)) },
            { name: 'Price', value: _getNumValueByExportKind(scMathUtil.roundForObj(_getFee(bill, 'common', 'tenderUnitFee'), decimalObj.glj.unitPrice)) },
          ];
          sno++;
          let leafItemNode = new emptyElement('Item');
          djfxbNode.children.push(leafItemNode);
          // leafItemNode.attrs.push(...leafBillAttrs);
          leafItemNode.attrs = leafBillAttrs;
          //2. 清单下工料机
          cacheObj[billIdKey].items.forEach((gljItem) => {
            let showQty = gljItem.mainMaterialConsume / bQtn;
            showQty = Math.round(showQty * 1000000) / 1000000;
            let gljAttrs = [
              { name: 'ItemNo', value: sno },
              { name: 'Code', value: gljItem.code },
              { name: 'Name', value: gljItem.name },
              { name: 'LaborWorkDays', value: 0 },
              { name: 'LaborUnitPrice', value: 0 },
              { name: 'LaborUnitTotal', value: 0 },
              // {name: 'MainMaterialConsume', value: scMathUtil.roundForObj(showQty, decimalObj.glj.quantity)},
              { name: 'MainMaterialConsume', value: _getNumValueByExportKind(scMathUtil.roundForObj(showQty, decimalObj.glj.quantity)) },
              // {name: 'MainMaterialUnit', value: gljItem.mainMaterialUnit},
              { name: 'MainMaterialUnit', value: _getStrValueByExportKind(gljItem.mainMaterialUnit) },
              { name: 'MainMaterialUnitPrice', value: _getNumValueByExportKind(scMathUtil.roundForObj(gljItem.mainMaterialUnitPrice, decimalObj.glj.unitPrice)) },
              { name: 'MainMaterialTotal', value: _getNumValueByExportKind(scMathUtil.roundForObj(showQty * gljItem.mainMaterialUnitPrice, decimalObj.glj.unitPrice)) },
              { name: 'AuxiliaryMaterialFee', value: 0 },
              { name: 'MaterialSum', value: 0 },
              { name: 'MachUsageFee', value: 0 },
              { name: 'OtherFee', value: 0 },
              { name: 'ManageFee', value: 0 },
              { name: 'Tax', value: 0 },
              { name: 'Profit', value: 0 },
              // {name: 'Price', value: _getNumValueByExportKind(scMathUtil.roundForObj(_getFee(bill), decimalObj.glj.unitPrice))},
              { name: 'Price', value: 0 },
            ];
            sno++;
            let gljItemNode = new emptyElement('Item');
            djfxbNode.children.push(gljItemNode);
            // gljItemNode.attrs.push(...gljAttrs);
            gljItemNode.attrs = gljAttrs;
          });
        }
      };
      const _getAllGlj = function (parentBill) {
        if (parentBill.data.name === '挖除水泥混凝土路面（平面交叉）') {
          debugger;
        }
        if (parentBill.children.length > 0) {
          parentBill.children.forEach((subBill) => {
            _getAllGlj(subBill);
          });
        } else {
          let billIdKey = prefix + parentBill.data.ID;
          if (!cacheObj.hasOwnProperty(billIdKey)) {
            cacheObj[billIdKey] = _getCacheObjInitialedItem(parentBill.data);
            addedGljCodeCache[billIdKey] = [];
            proKeysArr.push(billIdKey);
          }
          tenderProject.ration_glj.datas.forEach((rglj) => {
            if (rglj.billsItemID === parentBill.data.ID) {
              let ration = _getRation(rglj.rationID);
              if (ration) {
                // 计算消耗量，否则定额人材机消耗量取值会不正确
                gljOprObj.getTotalQuantity(rglj, ration);
              }
              let gljQty = parseFloat(rglj.tenderQuantity || rglj.quantity);
              if (isNaN(gljQty)) gljQty = 0;
              let gljRationQty = 0;
              if (ration) gljRationQty = parseFloat(ration.tenderQuantity || ration.quantity);
              if (isNaN(gljRationQty)) gljRationQty = 0;
              let gljCns = gljQty * gljRationQty;
              let prjGlj = _getPrjGLJ(rglj.projectGLJID);
              let gljUnitPrice = parseFloat(prjGlj.unit_price.market_price);
              let gljTotalPrice = gljCns * gljUnitPrice;
              let gljCode = rglj.code;

              if (rglj.type === 1) {
                //人工
                cacheObj[billIdKey].labourConsume = cacheObj[billIdKey].labourConsume + gljCns;
                cacheObj[billIdKey].labourUnitPrice = gljUnitPrice;
                cacheObj[billIdKey].labourTotalPrice = cacheObj[billIdKey].labourTotalPrice + gljTotalPrice;
              } else if (filterMtlTypes.indexOf(rglj.type) < 0) {
                if (!addedGljCodeCache[billIdKey].includes(gljCode)) {
                  addedGljCodeCache[billIdKey].push(gljCode);
                }
                if (prjGlj.is_main_material) {
                  let dtlObj = {};
                  dtlObj.code = gljCode;
                  dtlObj.name = rglj.name;
                  dtlObj.specs = rglj.specs;
                  //
                  let adhocGljQty = _getAdhocGljQty(parentBill.data.ID, dtlObj.code);
                  let adhocGljTtl = adhocGljQty * gljUnitPrice;
                  dtlObj.mainMaterialConsume = gljCns + adhocGljQty; //考虑清单单独加工料机的情况，需要补上消耗量
                  dtlObj.mainMaterialUnitPrice = gljUnitPrice;
                  dtlObj.mainMaterialTotalPrice = gljTotalPrice;
                  dtlObj.mainMaterialUnit = rglj.unit;
                  let isAdd = 0;
                  for (let i = 0; i < cacheObj[billIdKey].items.length; i++) {
                    //先比较对象中是否已存在同一条工料机，存在，则累加汇总消耗量和金额；否则添加。
                    if (dtlObj.code === cacheObj[billIdKey].items[i].code && dtlObj.name === cacheObj[billIdKey].items[i].name && dtlObj.mainMaterialUnit === cacheObj[billIdKey].items[i].mainMaterialUnit && dtlObj.specs === cacheObj[billIdKey].items[i].specs) {
                      cacheObj[billIdKey].items[i].mainMaterialConsume = cacheObj[billIdKey].items[i].mainMaterialConsume + gljCns;
                      cacheObj[billIdKey].items[i].mainMaterialTotalPrice = cacheObj[billIdKey].items[i].mainMaterialTotalPrice + gljTotalPrice;
                      isAdd = 1;
                      break;
                    }
                  }
                  if (isAdd === 0) {
                    cacheObj[billIdKey].items.push(dtlObj);
                  }
                  cacheObj[billIdKey].mainMaterialFee = cacheObj[billIdKey].mainMaterialFee + gljTotalPrice + adhocGljTtl;
                } else {
                  cacheObj[billIdKey].auxiliaryMaterialFee = cacheObj[billIdKey].auxiliaryMaterialFee + gljTotalPrice;
                }
              }
            }
          });
          // 整理完后，开始创建XML节点(这里与参考脚本逻辑不一样了，直接开始创建)
          _createNode(billIdKey, parentBill);
        }
      };

      if (topNode100To700) {
        topNode100To700.children.forEach((topChapterBill) => {
          _getAllGlj(topChapterBill);
        });
      }
      //...
      return djfxbNode;
    }

    function getBidEvaluationMainMaterial(tenderProject) {
      let bidMaterials = [];
      let i = 1;
      for (let b of tenderProject.bidMaterialData) {
        bidMaterials.push(new BidEvaluationMainMaterial(b, i));
        i++
      }
      return bidMaterials;
      function BidEvaluationMainMaterial(b, index) {
        const attrs = [{
          name: "Code",
          value: b.seq,
        },
        {
          name: "Number",
          value: b.code
        },
        {
          name: "Name",
          value: b.name
        },
        {
          name: "Specification",
          value: b.specs
        },
        {
          name: "Unit",
          value: b.unit
        },
        {
          name: "Price",
          value: _getNumValueByExportKind(b.marketPrice || '0'),
          type: TYPE.DECIMAL
        },
        {
          name: "LimitedPrice",
          value: _getNumValueByExportKind(b.marketPrice || '0'),
          type: TYPE.DECIMAL
        },
        {
          name: "Quantity",
          value: b.quantity,
          type: TYPE.DECIMAL
        },
        {
          name: "Total",
          value: 0
        },
        {
          name: "Remark",
          value: b.remark
        }
        ];
        if (isBidSubmission || isControl) {
          attrs[7].value = b.quantity;
          attrs[8].value = b.totalPrice;
        }
        Element.call(this, "BidEvaluationMainMaterial", attrs);
      }

    }


    function getIndexs(tenderProject) {
      let Indexs = new emptyElement('Indexs');
      let feature = tenderProject.property.projectFeature ? tenderProject.property.projectFeature : [];
      for (let f of feature) {
        if (f.code) Indexs.children.push(new IndexItem(f))
      }
      return Indexs;

      function IndexItem(fea) {
        const attrs = [{
          name: "Code",
          value: fea.code,
        },
        {
          name: "Name",
          value: fea.dispName,
        },
        {
          name: "Unit",
          value: fea.unit,
        },
        {
          name: "Value",
          value: fea.value,
        },
        {
          name: "Remark",
          value: fea.remark,
        }
        ]
        Element.call(this, "IndexItem", attrs);
      }


    }

    function _chkIfValid100(node) {
      let rst = true;
      if (node.data.name.indexOf('第100章') >= 0 && node.data.name.indexOf('总则') >= 0) {
        let bVal = _getFee(node);
        rst = node.children.length > 0 || bVal !== 0;
      }
      return rst;
    }

    function getBillsItems(tenderProject, cacheForFormula) {
      let items = new emptyElement("Items");
      let rootNodes = tenderProject.mainTree.roots;
      for (let r of rootNodes) {
        setItem(r, -1, items.children);
      }
      return items;

      function setItem(bNode, level, list, dftListCodeSeq = -1) {
        const specialChkBillFlag = [fixedFlag.DAYWORK_LABOR, fixedFlag.LABOUR_SERVICE, fixedFlag.MATERIAL, fixedFlag.CONSTRUCTION_MACHINE];
        if (bNode.sourceType == ModuleNames.ration) return;
        // 判断: 1. 招标清单 2. 是否量价，都是的话，return
        if (isBidInvitation && (bNode.data.specialProvisional == "材料暂估" || bNode.data.specialProvisional == "工程设备")) {
          return;
        }
        // 判断: 100章下无子清单，且金额为0时，return
        if (!_chkIfValid100(bNode)) {
          return;
        }
        let item = new bill(bNode, level, dftListCodeSeq);
        if (bNode.children && bNode.children.length > 0) {
          level += 1;
          let dftLCStartSeq = -1;
          if (isFlag(bNode.data) && specialChkBillFlag.includes(bNode.data.flagsIndex.fixed.flag)) {
            dftLCStartSeq = 1;
          }
          for (let c of bNode.children) {
            setItem(c, level, item.children, dftLCStartSeq);
            if (dftLCStartSeq > 0) dftLCStartSeq++;
          }
        }
        list.push(item);

        function getCalcType(node) {
          /*           
          判断是否父项：
           是父项，则取1；
          是叶子项，则判断其下有无套定额/量价/工料机：
                有则取1；
                无则判断有无基数计算：
               有则取2；
               无则取3 */
          if (node.children && node.children.length > 0) {
            return 1; //是父项，则取1, 有套定额/量价/工料机，也取1
          } else {
            return node.data.calcBase && node.data.calcBase != "" ? 2 : 3
          }
        }

        function getItemType(node) {
          let Bills = projectObj.project.Bills;
          //是100~900章部分、或是计日工部分，叶子清单输出1，父项输出0；          
          if (Bills.isBelongOneToSeven(node) || Bills.isBelongDayWork(node)) {
            if (node.children && node.children.length > 0) {
              return node.children[0].sourceType == ModuleNames.ration ? 1 : 0
            }
            //山东新需求：清单 第XXX章、计日工、劳务、材料、机械 输出0
            const bNodeName = _billStrFilter(node.data.name);
            if (bNodeName.indexOf('清单第') >= 0 && bNodeName.indexOf('00章') > 0) {
              return 0;
            } else if (isFlag(node.data) && specialChkBillFlag.includes(node.data.flagsIndex.fixed.flag)) {
              return 0;
            }
            return 1 //叶子清单输出1
          } else {
            return 0;
            /* //非100~900章部分，
            //  是暂列金额，判断暂列金额的金额等于0，则输出为0；暂列金额的金额不等于0，则输出为1；
            if (node.data.name && node.data.name.indexOf("暂列金额") != -1) {
              let sum = node.data.feesIndex && node.data.feesIndex.common ? node.data.feesIndex.common.tenderTotalFee : "";
              return gljUtil.isNotEmpty(sum) ? 1 : 0
            } else { //非暂列金额,则判断清单的工程量是否等于0，等于0，则输出0；不等于0，则输出1
              return gljUtil.isNotEmpty(node.data.quantity) ? 1 : 0
            } */
          }

        }

        function bill(bNode, level, dftListCodeSeq = -1) {
          let data = bNode.data;
          let CostKind = 3;
          if (data.name === undefined || data.name === null) data.name = '';
          if (data.name && data.name.indexOf("安全生产费") != -1) CostKind = 1;
          if (data.name && data.name.indexOf("暂列金额") != -1) CostKind = 2;
          //1 = 工程量×综合单价；2 = 计算基数×费率；3 = 工程量×单价。
          let CalcType = getCalcType(bNode);
          //取暂估价类型。读取造价书界面的专项暂定列。0=材料暂估价，1=工程设备暂估价,2=专业工程暂估价，没有选的输出为空。
          let ProvisionalType = "";
          if (data.specialProvisional == "材料暂估") ProvisionalType = 0;
          if (data.specialProvisional == "工程设备") ProvisionalType = 1;
          if (data.specialProvisional == "专业工程") ProvisionalType = 2;
          if (data.specialProvisional == "固定费用") ProvisionalType = 3;

          //MpRatio
          let MpRatio = "";
          let MaterialRatio = "";
          let MechRatio = "";
          if (data.quantityCoe) {
            if (data.quantityCoe["labour"]) MpRatio = data.quantityCoe["labour"];
            if (data.quantityCoe["material"]) MaterialRatio = data.quantityCoe["material"];
            if (data.quantityCoe["machine"]) MechRatio = data.quantityCoe["machine"];
          }
          let fail = billNameChecking(bNode, tenderProject.projectInfo.name, fixedFlag)
          //fail: { hint: '错误提示', type: '提示所属（基本就是单位工程名称）' }
          let ListCode = "";
          // if (ListCodeMap[data.name]) ListCode = ListCodeMap[data.name];
          if (ListCodeMap[_billStrFilter(data.name)]) {
            ListCode = ListCodeMap[_billStrFilter(data.name)];
          } else if (_chkAdhocChapterBillCode(data.name)) {
            ListCode = _extractAdhocChapter(data.name);
          } else if (data.code && data.code != "") {
            ListCode = data.code;
          } else if (dftListCodeSeq > 0) {
            ListCode = `${dftListCodeSeq}`;
          }

          let qtyFormula = data.feesIndex && data.feesIndex.common ? data.feesIndex.common.tenderTotalFee : "";
          //data.calcBase //data.calcBase ? cbParser.toFExpr(data.calcBase, tenderProject.mainTree.items) : "",
          if (!data.name.includes('暂列金额') && isBidInvitation) {
            if (data.hasOwnProperty('calcBase')) {
              let chkNaN = parseFloat(data.calcBase);
              if (isNaN(chkNaN)) {
                qtyFormula = data.calcBase;
              } else {
                qtyFormula = '';
              }
            } else {
              qtyFormula = '';
            }
            //判断公式（calcBase）是否为正常的计算公式(即非直接输入数量)，
          }

          let formulaCode = '';
          if (cacheForFormula['_' + data.ID] && cacheForFormula['_' + data.ID].formulaCode) {
            formulaCode = cacheForFormula['_' + data.ID].formulaCode;
          }

          const attrs = [{
            name: "ListCode",
            value: ListCode,
          },
          {
            name: "ListName",
            value: data.name,
            fail: fail
          },
          {
            name: "Unit",
            value: data.unit,
          },
          {
            name: "Num",
            value: data.quantity,
            type: TYPE.DECIMAL,
            toFix: 3
          },
          {
            name: "QtyFormula",
            value: qtyFormula,
            type: TYPE.DECIMAL,
            toFix: 2
          },
          {
            name: "Price",
            value: 0,//data.feesIndex && data.feesIndex.common ? data.feesIndex.common.tenderUnitFee : "",
            type: TYPE.DECIMAL,
            toFix: 2
          },
          {
            name: "Rate",
            value: 100,
          },
          {
            name: "Sum",
            value: 0,//data.feesIndex && data.feesIndex.common ? data.feesIndex.common.tenderTotalFee : "",
            type: TYPE.DECIMAL,
            toFix: 2
          },
          {
            name: "ChapterKind",
            value: level > 3 ? 3 : level,
          },
          {
            name: "CostKind",
            value: CostKind,
          },
          {
            name: "CalcType",
            value: CalcType,
          },
          {
            name: "ProvisionalType",
            value: ProvisionalType,
            mustHasValue: true
          },
          {
            name: "MeterRules",
            value: "",
          },
          {
            name: "Content",
            value: data.jobContentText,
          },
          {
            name: "Remarks",
            value: data.remark,
          },
          /*  {
             name: "MpRatio",
             value: MpRatio,
           },
           {
             name: "MaterialRatio",
             value: MaterialRatio,
           },
           {
             name: "MechRatio",
             value: MechRatio,
           },
           {
             name: "AdjustedPrice",
             value: data.feesIndex && data.feesIndex.common ? data.feesIndex.common.tenderUnitFee : "",
           },
           {
             name: "AdjustedSums",
             value: data.feesIndex && data.feesIndex.common ? data.feesIndex.common.tenderTotalFee : "",
           }, */
          {
            name: "ItemType",
            value: getItemType(bNode),
          },
          /* {
            name: "FomulaCode",
            value: ""
          }, */
          {
            name: "FormulaCode",
            value: formulaCode,
          },
          ];
          //投标、招标控制价时。取单价。
          //招标时，如果是“安全生产费”或“暂列金额”，取单价，否则取0。
          if (isBidSubmission || isControl || CostKind == 1 || CostKind == 2 || ProvisionalType === 2 || ProvisionalType === 3) {
            attrs[5].value = data.feesIndex && data.feesIndex.common ? scMathUtil.roundForObj(data.feesIndex.common.tenderUnitFee, tenderProject.property.decimal.bills.unitPrice) : "";
            attrs[7].value = data.feesIndex && data.feesIndex.common ? scMathUtil.roundForObj(data.feesIndex.common.tenderTotalFee, tenderProject.property.decimal.bills.totalPrice) : "";
            //暂列金额 数量为0的时候，单价输出0
            if (CostKind == 2 && !gljUtil.isNotEmpty(data.quantity)) attrs[5].value = 0
          }
          let fixedSumVal = _getFixedSum(tenderProject); // 固定费用

          Element.call(this, "Item", attrs);
          let cc = CostComposition(bNode);
          if (cc) this.children.push(cc);
          this.children.push(CostStructure(data, tenderProject.property.decimal.bills.totalPrice))

          function CostComposition(bNode) {
            // 山东逻辑：如果清单下有计算基数，则需要输出(废弃)
            // 新逻辑：
            // 标准接口文档里，写了只有招标清单，才是完全不输出定额相关数据的
            // 当清单有清单基数和费率，那么应该就是没有定额，不输出定额；
            // 清单没有基数和费率，也没有下挂定额，那么也不输出定额相关字段；
            // 清单有下挂定额、量价，那么输出定额相关数据。
            // if (isBidInvitation) return null; // 山东接口又要这个了
            let CostComposition = new emptyElement('CostComposition');
            let Norms = [];
            let Costs = [];
            if (bNode.children && bNode.children.length > 0 && bNode.children[0].sourceType == ModuleNames.ration) {
              for (let r of bNode.children) {
                if (r.data.type == rationType.ration) {
                  if (isEmptyRation(r.data) || isBidInvitation) continue; // 招标 或者 定额空行不输出到接口文件中。
                  Norms.push(new Ration(r.data));
                } else if (!isBidInvitation) {
                  Costs.push(new Cost(r.data));
                }
              }
            }
            if (Norms.length > 0) CostComposition.children.push(...Norms);
            if (Costs.length > 0) CostComposition.children.push(...Costs);
            if (bNode.data.calcBase) CostComposition.children.push(new Formula(bNode.data));
            return CostComposition.children.length > 0 ? CostComposition : null;

            //定额空行不输出到接口文件中。 //定额空行的判断是：定额编码、定额名称、定额单位、定额单位、定额工程量为零或为空时
            function isEmptyRation(ration) {
              return !gljUtil.isNotEmpty(ration.code) && !gljUtil.isNotEmpty(ration.name) && !gljUtil.isNotEmpty(ration.unit) && (!gljUtil.isNotEmpty(ration.quantity) || ration.quantity == 0)
            }


            function Formula(bills) {
              let sumFix = (bills.name === '已包含在清单合计中的材料、工程设备、专业工程暂估价合计') ? fixedSumVal : 0;
              const attrs = [{
                name: "Name",
                value: bills.name
              },
              {
                name: "Formulas",
                value: _getFormulaDispName(cacheForFormula, bills)
              },
              {
                name: "Ratio",
                value: 1
              },
              {
                name: "Sum",
                // value: bills.feesIndex && bills.feesIndex.common ? bills.feesIndex.common.tenderTotalFee : "",
                // value: _getNumValueByExportKind(bills.feesIndex && bills.feesIndex.common ? bills.feesIndex.common.tenderTotalFee : "") - sumFix,
                value: _getNumValueByExportKind(bills.feesIndex && bills.feesIndex.common ? bills.feesIndex.common.tenderTotalFee : ""), // 不用再减一次sumFix
                type: TYPE.DECIMAL
              },
              {
                name: "Remarks",
                value: bills.remark
              }
              ]
              Element.call(this, "Formula", attrs);

              //               1.Name
              // 名称/描述。取清单的名称。
              // 2.Formulas
              // 计算式。读取计算基数的文本。
              // 取基数计算窗口内容，基数直接转换为金额？参考标准文档的 7.11 及 7.12 节。
              // 7.11是定额的费用，7.12是清单累进基数，主要是估概预算中用到，清单里的不同，所以中山的接口直接输出基数文本。
              // 3.Ratio
              // 系数。输出为1，非必填。
              // 4.Sum
              // 取金额。
              // 5.Remarks
            }

            function Cost(item) {
              let BasePrice = 0;
              if (item.type == rationType.volumePrice) { // 当插入的是量价时，基价读取单价列。
                BasePrice = item.feesIndex && item.feesIndex.common ? item.feesIndex.common.tenderUnitFee : 0
              } else {
                BasePrice = getBasePrice(item.projectGLJID, tenderProject)
              }
              let calcMap = tenderProject.calcProgram.compiledTemplateMaps
              let CostTypeNo = '';
              if (feeRateMap[calcMap[item.programID]]) CostTypeNo = feeRateMap[calcMap[item.programID]];
              const attrs = [{
                name: "Code",
                value: item.code,
              }, {
                name: 'Name',
                value: item.name
              }, {
                name: 'Spec',
                value: item.specs
              }, {
                name: 'Unit',
                value: item.unit
              }, {
                name: 'Num',
                value: item.tenderQuantity
              }, {
                name: 'BasePrice',
                value: BasePrice
              }, {
                name: 'Price',
                value: item.feesIndex && item.feesIndex.common ? item.feesIndex.common.tenderUnitFee : 0
              }, {
                name: 'IsEquipment',
                value: item.subType == gljType.EQUIPMENT ? 1 : 0
              }, {
                name: 'CostTypeNo',
                value: CostTypeNo
              }, {
                name: 'ProfitRate',
                value: getFeeRate(item.programID, 'profit', tenderProject)

              },
              {
                name: 'TaxRate',
                value: getFeeRate(item.programID, 'tax', tenderProject)
              },
              {
                name: 'MpRatio',
                value: item.subType == gljType.LABOUR ? 100 : 0
              },
              {
                name: 'MaterialRatio',
                value: item.subType == gljType.GENERAL_MATERIAL ? 100 : 0
              },
              {
                name: 'MechRatio',
                value: item.subType == gljType.GENERAL_MACHINE ? 100 : 0
              }
              ]
              Element.call(this, "Cost", attrs);
              this.children.push(CostStructure(item, tenderProject.property.decimal.ration.totalPrice));
            }


            function Ration(ration) {
              let calcMap = tenderProject.calcProgram.compiledTemplateMaps
              let CostTypeNo = '';
              if (feeRateMap[calcMap[ration.programID]]) CostTypeNo = feeRateMap[calcMap[ration.programID]];
              const attrs = [{
                name: "NormLibNo",
                value: 'YSDE-000000-2018-86',
              }, {
                name: 'DisplayCode',
                value: ration.code
              }, {
                name: 'Name',
                value: ration.name
              }, {
                name: 'Unit',
                value: ration.unit
              }, {
                name: 'Num',
                value: ration.tenderQuantity
              },
              {
                name: 'CostTypeNo',
                value: CostTypeNo
              },
              {
                name: 'ProfitRate',
                value: getFeeRate(ration.programID, 'profit', tenderProject) //tenderProject.ProfitRate
              },
              {
                name: 'TaxRate',
                value: getFeeRate(ration.programID, 'tax', tenderProject) //tenderProject.TaxRate
              },
              {
                name: 'FabricationCost',
                value: ration.feesIndex && ration.feesIndex.common ? ration.feesIndex.common.tenderTotalFee : 0
              },
              {
                name: 'AdjustStatus',
                value: ration.adjustState
              }
              ]
              Element.call(this, "Norm", attrs);
              this.children.push(CostStructure(ration, tenderProject.property.decimal.ration.totalPrice));
              this.children.push(Consume(ration));
            }
          }

          function Consume(ration) {
            let consume = new emptyElement('Consume');
            for (let rg of ration.rationGLJList) {
              consume.children.push(new ConsumeItem(rg));
            }
            return consume;

            function ConsumeItem(rg) {
              const attrs = [{
                name: "Code",
                value: rg.code,
              }, {
                name: "Consumption",
                value: rg.tenderQuantity
              }];
              Element.call(this, "ConsumeItem", attrs);

            }

          }


          function CostStructure(item, decimalNum) {
            let CostStructure = new emptyElement('CostStructure');
            for (let f of cpFeeTypes) {
              if (itemFeeMap[f.type]) CostStructure.children.push(new CostItem(item, f.type))
            }
            if (CostStructure.children.length == 0) CostStructure.children.push(new CostItem({}, ""))
            function CostItem(item, type) {
              const attrs = [{
                name: "ItemNo",
                value: itemFeeMap[type],
              }, {
                name: 'Sum',
                value: 0 //fee.tenderTotalFee
              }]
              if ((isBidSubmission || isControl) && item.feesIndex && item.feesIndex[type]) {
                attrs[1].value = scMathUtil.roundForObj(item.feesIndex[type].tenderTotalFee, decimalNum);
                if ((item.name === '已包含在清单合计中的材料、工程设备、专业工程暂估价合计') && (itemFeeMap[type] === 'JAF')) {
                  attrs[1].value = scMathUtil.roundForObj(attrs[1].value - fixedSumVal, decimalNum);
                }
              }
              Element.call(this, "CostItem", attrs);
            }
            return CostStructure;
          }


        }
      }
    }

    function Params(tenderProject) {
      let feature = tenderProject.property.projectFeature ? tenderProject.property.projectFeature : [];
      let featrueMap = {};
      let baseMap = {};
      for (let f of feature) {
        featrueMap[f.key] = f;
      }
      let baseInfo = _.find(tenderProject.property.basicInformation, {
        dispName: "基本信息",
      });
      for (let i of baseInfo.items) {
        let key = i.key;
        //if (i.dispName == "编制日期") key = "编制时间";
        baseMap[key] = i;
      }


      let BuildType = "";
      if (baseMap["natureConstruction"].value == "新建") BuildType = 0;
      if (baseMap["natureConstruction"].value == "改扩建") BuildType = 1;
      let Terrain = "";
      if (baseMap["terrainCategory"].value == "平原微丘") Terrain = 0;
      if (baseMap["terrainCategory"].value == "山岭重丘") Terrain = 1;
      let DesignSpeed = featrueMap["designSpeed"].value;
      let Structure = "";
      if (featrueMap["pavementStructure"].value == "沥青路面") Structure = 0;
      if (featrueMap["pavementStructure"].value == "水泥混凝土路面") Structure = 1;
      if (featrueMap["pavementStructure"].value == "其他类型路面") Structure = 2;
      let RoadGrade = "";
      if (RoadGradeMap[baseMap["roadGrade"].value]) RoadGrade = RoadGradeMap[baseMap["roadGrade"].value];

      const attrs = [{
        name: "PrjArea",
        value: baseMap["location"] ? baseMap["location"].value : ""
      },
      {
        name: "StartPileNo",
        value: baseMap["startChainages"] ? baseMap["startChainages"].value : "",
        mustHasValue: true
      },
      {
        name: "EndPileNo",
        value: baseMap["endChainages"] ? baseMap["endChainages"].value : "",
        mustHasValue: true
      },
      {
        name: "BuildType",
        value: BuildType,
      },
      {
        name: "Terrain",
        value: Terrain,
        mustHasValue: true
      },
      {
        name: "RoadGrade",
        value: RoadGrade,
        mustHasValue: true
      },
      {
        name: "DesignSpeed",
        value: DesignSpeed,
        mustHasValue: true
      },
      {
        name: "Structure",
        value: Structure,
        mustHasValue: true
      },
      {
        name: "SubgradeWidth",
        value: featrueMap["subgradeWidth"] ? featrueMap["subgradeWidth"].value : "",
        mustHasValue: true
      },
      {
        name: "RoadLength",
        value: featrueMap["roadLength"] ? featrueMap["roadLength"].value : "",
        mustHasValue: true
      },
      {
        name: "BridgeLength",
        value: featrueMap["bridgeLength"] ? featrueMap["bridgeLength"].value : "",
        mustHasValue: true
      },
      {
        name: "TunnelLength",
        value: featrueMap["tunnelLength"] ? featrueMap["tunnelLength"].value : "",
        mustHasValue: true
      },
      {
        name: "BriTunRate",
        value: featrueMap["briTunRate"] ? featrueMap["briTunRate"].value : "",
        mustHasValue: true
      },
      {
        name: "InterchangeNum",
        value: featrueMap["interchangeNum"] ? featrueMap["interchangeNum"].value : "",
        mustHasValue: true
      },
      {
        name: "StubLengths",
        value: featrueMap["stubLengths"] ? featrueMap["stubLengths"].value : "",
        mustHasValue: true
      },
      {
        name: "LaneLength",
        value: featrueMap["laneLength"] ? featrueMap["laneLength"].value : "",
        mustHasValue: true
      },
      ];
      Element.call(this, "Params", attrs);
    }

    function SummaryOfCost(totalItem, proItem, safeItem, oneToSevenItem, feature) {
      let attrs = [{
        name: "TenderSumLimit",
        value: totalItem.feesIndex && totalItem.feesIndex.common && totalItem.feesIndex.common.tenderTotalFee ? totalItem.feesIndex.common.tenderTotalFee : 0,
        type: TYPE.DECIMAL,
        toFix: 2,
      },
      {
        name: "BidTotal",
        value: totalItem.feesIndex && totalItem.feesIndex.common && totalItem.feesIndex.common.tenderTotalFee ? totalItem.feesIndex.common.tenderTotalFee : 0,
        type: TYPE.DECIMAL,
        toFix: 2,
      },
      {
        name: "BillTotal",
        value: oneToSevenItem.feesIndex && oneToSevenItem.feesIndex.common && oneToSevenItem.feesIndex.common.tenderTotalFee ? oneToSevenItem.feesIndex.common.tenderTotalFee : 0,
        type: TYPE.DECIMAL,
        toFix: 2,
      },
      {
        name: "CostForHSE",
        value: safeItem && safeItem.feesIndex && safeItem.feesIndex.common && safeItem.feesIndex.common.tenderTotalFee ? safeItem.feesIndex.common.tenderTotalFee : 0,
        type: TYPE.DECIMAL,
        toFix: 2,
      },
      {
        name: "ProvisionalSums",
        value: proItem.feesIndex && proItem.feesIndex.common && proItem.feesIndex.common.tenderTotalFee ? proItem.feesIndex.common.tenderTotalFee : 0,
        type: TYPE.DECIMAL,
        toFix: 2,
      },
      {
        name: "Appraisal",
        // value: totalItem.feesIndex && totalItem.feesIndex.estimate && totalItem.feesIndex.estimate.tenderTotalFee ? totalItem.feesIndex.estimate.tenderTotalFee : 0,
        value: 0,
        type: TYPE.DECIMAL,
        toFix: 2,
      },
      ];
      if (isBidInvitation) {
        attrs.splice(0, 3) //招标
      }
      //if (isControl) attrs.splice(1, 5); //控制价
      if (isBidSubmission) { //投标文件时，读工程特征中的 招标控制价 值
        let tenderSumLimit = _.find(feature, { "key": "tenderSumLimit" });
        if (tenderSumLimit) attrs[0].value = tenderSumLimit.value
      }
      Element.call(this, "SummaryOfCost", attrs);
    }

    function MakeInfo(tenderProject) {
      let property = tenderProject.property;
      let baseMap = {};
      let baseInfo = _.find(property.basicInformation, {
        dispName: "基本信息",
      });
      for (let i of baseInfo.items) {
        let key = i.key;
        //if (i.dispName == "编制日期") key = "编制时间";
        baseMap[key] = i;
      }
      //mustHasValue  
      const attrs = [{
        name: "ValuationModel",
        value: property.taxType,
      },
      {
        name: "Manage",
        value: baseMap["constructingUnit"] ? baseMap["constructingUnit"].value : "",
      },
      {
        name: "Designer",
        value: baseMap["designUnit"] ? baseMap["designUnit"].value : "",
        mustHasValue: true
      },
      {
        name: "Compile",
        value: baseMap["compileUnit"] ? baseMap["compileUnit"].value : "",
      },
      {
        name: "CompileApprover",
        value: baseMap["compileApprover"] ? baseMap["compileApprover"].value : "",
      },
      {
        name: "CompileCertNo",
        value: baseMap["compileCertNo"] ? baseMap["compileCertNo"].value : "",
        mustHasValue: true
      },
      {
        name: "CompileDate",
        value: baseMap["compileDate"] && baseMap["compileDate"].value != "" ? baseMap["compileDate"].value + "T00:00:00" : "",
        mustHasValue: true
      },
      {
        name: "Review",
        value: baseMap["reviewUnit"] ? baseMap["reviewUnit"].value : "",
        mustHasValue: true
      },
      {
        name: "ReviewApprover",
        value: baseMap["reviewApprover"] ? baseMap["reviewApprover"].value : "",
        mustHasValue: true
      },
      {
        name: "ReviewCertNo",
        value: baseMap["reviewCertNo"] ? baseMap["reviewCertNo"].value : "",
        mustHasValue: true
      },
      {
        name: "ReviewDate",
        value: baseMap["reviewDate"] && baseMap["reviewDate"].value != "" ? baseMap["reviewDate"].value + "T00:00:00" : "",
        mustHasValue: true
      },
      {
        name: "Examine",
        value: baseMap["examineUnit"] ? baseMap["examineUnit"].value : "",
        mustHasValue: true
      },
      {
        name: "ExamineApprover",
        value: baseMap["examineApprover"] ? baseMap["examineApprover"].value : "",
        mustHasValue: true
      },
      {
        name: "ExamineCertNo",
        value: baseMap["examineCertNo"] ? baseMap["examineCertNo"].value : "",
        mustHasValue: true
      },
      {
        name: "ExamineDate",
        value: baseMap["examineDate"] && baseMap["examineDate"].value != "" ? baseMap["examineDate"].value + "T00:00:00" : "",
        mustHasValue: true
      },
      {
        name: "CompileExplain",
        value: baseMap["compileExplain"] ? baseMap["compileExplain"].value : "",
        mustHasValue: true
      },
      {
        name: "ExamineExplain",
        value: baseMap["examineExplain"] ? baseMap["examineExplain"].value : "",
        mustHasValue: true
      },
      {
        name: "ProjectExplain",
        value: baseMap["projectExplain"] ? baseMap["projectExplain"].value : "",
        mustHasValue: true
      },
      {
        name: "Bidder",
        // value: baseMap["bidderCompany"] ? baseMap["bidderCompany"].value : "",
        value: baseMap["bidderName"] ? baseMap["bidderName"].value : "",
        mustHasValue: true
      },
      ];
      if (isBidInvitation) { //招标文件，则以下的8、12~18则不输出
        attrs.splice(11, 7);
        attrs.splice(7, 1);
      }
      Element.call(this, "MakeInfo", attrs);
    }

    let data = new CprjInfo(projectData.name);
    data.children.push(new SystemInfo(projectData));
    data.children.push(new CostBasis());
    let seriNo = 1;
    let Rates = [];
    let Practs = [];
    let EprjInfos = [];
    for (let c of projectData.children) {
      let tenderProject = tenderDetailMap[c.ID];
      let feeRataDatas = tenderProject.FeeRate.datas;
      Rates.push(new Rate(tenderProject, feeRataDatas, seriNo));
      Practs.push(new Pract(tenderProject, seriNo));
      EprjInfos.push(new EprjInfo(tenderProject));
      seriNo++;
    }
    data.children.push(...Rates, ...Practs, ...EprjInfos);
    return [{
      data: data,
      exportKind: exportKind,
      fileName: projectData.name + INTERFACE_CONFIG[areaKey]["fileSuffix"][exportKind],
    },];
  }

  // 山东需求，要有密文校验信息(SM3算法，在界面上已导入sm3对象)
  /**
   * SM3加密主函数
   * @param msg
   * @returns
   */
  function sm3Digest(msg) {
    let hashHex = sm3(msg);
    // return hashHex;
    return hashHex.toUpperCase();
  }

  function _extractBillCalcRefs(currentBill) {
    const rst = [];
    function _extract(spliter, excluded = true, nextGap) {
      let currentBillCalcBase = currentBill.calcBase;
      let currentIdx = currentBillCalcBase.indexOf(spliter);
      let exCnt = 0;
      if (excluded) exCnt = spliter.length;
      while (currentIdx >= 0) {
        let bId = currentBillCalcBase.substr(currentIdx + excluded, nextGap);
        if (!rst.includes(bId)) {
          rst.push(bId);
        }
        currentBillCalcBase = currentBillCalcBase.substr(currentIdx + excluded + nextGap);
        currentIdx = currentBillCalcBase.indexOf(spliter);
      }
    }
    if (typeof currentBill.calcBase === 'string') {
      //1. 抽取@引用
      _extract('@', true, 36);
      //2. 抽取特殊引用
      // 2.1 {各章清单合计}
      _extract('{各章清单合计}', false, '{各章清单合计}'.length);
      // 2.2 {100章以外清单合计}
      _extract('{100章以外清单合计}', false, '{100章以外清单合计}'.length);
    }
    return rst;
  }

  function _preCodeingForBills(tenderProject) {
    const cacheObj = {};
    function _chkAdhocChapterBill(bill) {
      let rst = false;
      if (typeof bill.name === 'string' && bill.name.includes('00章') && bill.name.includes('清单')) {
        rst = true;
      }
      return rst;
    }

    function _setCache(bNode) {
      cacheObj['_' + bNode.data.ID] = bNode.data;
      if (bNode.children && bNode.children.length > 0) {
        for (let subNode of bNode.children) {
          _setCache(subNode);
        }
      }
    }
    let rootNodes = tenderProject.mainTree.roots;
    for (let rootNode of rootNodes) {
      _setCache(rootNode);
    }

    let cnt = 1;
    let billsForAcc = [];
    for (let bill of tenderProject.Bills.datas) {
      //这一步设置特殊清单(各章清单合计, 100章~1200章)
      cacheObj['_{100章以外清单合计}'] = {};
      if (_billStrFilter(bill.name).includes('第100章至700章清单') || sectionNameMap[_billStrFilter(bill.name)] || _chkAdhocChapterBill(bill)) {
        if (cacheObj['_' + bill.ID]) {
          if (!cacheObj['_' + bill.ID].hasOwnProperty('formulaCode')) {
            cacheObj['_' + bill.ID].formulaCode = `F${cnt}`;
            cnt++;
          }
        }
        // if (_billStrFilter(bill.name).includes('第100章至700章清单')) {
        if (_billStrFilter(bill.name).includes('第100章至') && _billStrFilter(bill.name).includes('00章清单')) {
          cacheObj['_{各章清单合计}'] = {};
          cacheObj['_{各章清单合计}'].formulaCode = `{F${cnt - 1}}`;
        } else if (!_billStrFilter(bill.name).includes('清单第100章')) {
          billsForAcc.push(`F${cnt - 1}`);
        }
      }
    }
    let tmpStr = ''
    for (let idx = 0; idx < billsForAcc.length; idx++) {
      if (idx === 0) {
        tmpStr = '( ' + `{${billsForAcc[idx]}}`;
      } else {
        tmpStr = tmpStr + ` + {${billsForAcc[idx]}}`;
      }
      if (idx === billsForAcc.length - 1) tmpStr = tmpStr + ' )';
    }
    cacheObj['_{100章以外清单合计}'].formulaCode = tmpStr;

    for (let bill of tenderProject.Bills.datas) {
      let billRefs = _extractBillCalcRefs(bill);
      for (let refBillId of billRefs) {
        if (cacheObj['_' + refBillId]) {
          if (!cacheObj['_' + refBillId].hasOwnProperty('formulaCode')) {
            cacheObj['_' + refBillId].formulaCode = `F${cnt}`;
            cnt++;
          }
        }
      }
    }
    return cacheObj;
  }

  function _getFormulaDispName(cacheForFormula, currentBill) {
    let rst = currentBill.calcBase;
    if (typeof currentBill.calcBase === 'string') {
      //1. @引用
      let currentBillCalcBase = currentBill.calcBase;
      let currentIdx = currentBillCalcBase.indexOf('@');
      let bIdArr = [], replaceArr = [];
      while (currentIdx >= 0) {
        let bId = currentBillCalcBase.substr(currentIdx + 1, 36);
        bIdArr.push(bId);
        if (cacheForFormula['_' + bId]) {
          if (cacheForFormula['_' + bId].hasOwnProperty('formulaCode')) {
            replaceArr.push(`{${cacheForFormula['_' + bId].formulaCode}}`);
          } else {
            replaceArr.push(`{无formulaCode错误：${bId}}`);
          }
        } else {
          replaceArr.push(`{引用错误：${bId}}`);
        }
        currentBillCalcBase = currentBillCalcBase.substr(currentIdx + 37);
        currentIdx = currentBillCalcBase.indexOf('@');
      }
      let tempBillCalcBase = currentBill.calcBase;
      for (let idx = 0; idx < bIdArr.length; idx++) {
        tempBillCalcBase = tempBillCalcBase.replace('@' + bIdArr[idx], replaceArr[idx]);
      }
      //2. 特殊引用
      //{各章清单合计} {100章以外清单合计}
      if (tempBillCalcBase.includes('{各章清单合计}')) {
        console.log(`特殊引用清单{各章清单合计}：${currentBill.name}(${currentBill.code} - ${tempBillCalcBase})`);
        tempBillCalcBase = tempBillCalcBase.replace('{各章清单合计}', cacheForFormula['_{各章清单合计}'].formulaCode);
      }
      if (tempBillCalcBase.includes('{100章以外清单合计}')) {
        console.log(`特殊引用清单{100章以外清单合计}：${currentBill.name}(${currentBill.code} - ${tempBillCalcBase})`);
        tempBillCalcBase = tempBillCalcBase.replace('{100章以外清单合计}', cacheForFormula['_{100章以外清单合计}'].formulaCode);
      }
      // 
      rst = tempBillCalcBase;
    }
    return rst;
  }

  return {
    entry,
  };
})();