YangHuCost/web/building_saas/main/js/views/project_glj_view.js

/**
 * Created by zhang on 2018/3/13.
 */
projectGljObject = {
  showTag: "ration", //mixRatio/machine
  showMixRatioMark: "",
  displayType: filterType.ALL,
  mixRatioType: [gljType.CONCRETE, gljType.MORTAR, gljType.MIX_RATIO, gljType.MAIN_MATERIAL],
  machineType: [gljType.GENERAL_MACHINE],
  projectGljSetting: {},
  projectGljSpread: null,
  projectGljSheet: null,
  materialTreeSheet: null,
  projectGljSheetData: [],
  mixRatioSetting: {},
  relatedRationSetting: {
    header: [
      { headerName: "编码", headerWidth: 100, dataCode: "code", dataType: "String" },
      { headerName: "名称", headerWidth: 180, dataCode: "name", dataType: "String" },
      { headerName: "单位", headerWidth: 50, dataCode: "unit", dataType: "String", hAlign: "center" },
      { headerName: "工程量", headerWidth: 65, dataCode: "quantity", dataType: "Number", hAlign: "right", decimalField: "ration.quantity" },
      { headerName: "单价", headerWidth: 65, dataCode: "feesIndex.common.unitFee", dataType: "Number", hAlign: "right", decimalField: "ration.unitPrice" },
    ],
    view: {
      lockColumns: [0, 1, 2, 3, 4], //,
      //colHeaderHeight:30
    },
  },
  materialTreeSetting: {
    emptyRows: 0,
    headRows: 1,
    headRowHeight: [21],
    defaultRowHeight: 21,
    treeCol: 0,
    cols: [],
  },
  materialSetting: {
    header: [
      { headerName: "编码", headerWidth: 200, dataCode: "code", dataType: "String" },
      { headerName: "名称", headerWidth: 160, dataCode: "name", dataType: "String" },
      { headerName: "规格型号", headerWidth: 160, dataCode: "specs", hAlign: "left", dataType: "String" },
      { headerName: "单位", headerWidth: 45, dataCode: "unit", hAlign: "center", dataType: "String" },
      { headerName: "定额价", headerWidth: 70, dataCode: "basePrice", hAlign: "right", dataType: "Number", validator: "number" }, //,decimalField:'glj.unitPrice'
      { headerName: "预算价", headerWidth: 70, dataCode: "marketPrice", hAlign: "right", dataType: "Number", validator: "number" }, //,decimalField:"glj.unitPrice"
      { headerName: "总消耗量", headerWidth: 70, dataCode: "quantity", hAlign: "right", dataType: "Number", decimalField: "glj.quantity" },
      { headerName: "三材系数", headerWidth: 70, dataCode: "materialCoe", hAlign: "right", dataType: "Number", validator: "number" }, //,decimalField:'material'
      { headerName: "三材量", headerWidth: 100, dataCode: "materialQuantity", hAlign: "right", dataType: "Number", decimalField: "glj.quantity" },
      {
        headerName: "三材类别",
        headerWidth: 70,
        dataCode: "materialType",
        hAlign: "center",
        dataType: "String",
        cellType: "comboBox",
        editorValueType: true,
        options: materialComboMap,
      },
    ],
    view: {
      lockColumns: [0, 1, 2, 3, 6, 8],
    },
  },
  mixRatioSpread: null,
  mixRatioSheet: null,
  mixRatioData: [],
  usedTenderList: [],
  usedUnitPriceInfo: null,
  displayTypeMap: [
    { ID: "LABOUR", text: "人工" },
    { ID: "GENERAL_MATERIAL", text: "材料" },
    { ID: "GENERAL_MACHINE", text: "机械" },
    /*{ID:'MAIN_MATERIAL',text:'主材'},
        {ID:'EQUIPMENT',text:'设备'}*/
  ],
  importJson: null,

  initSpreads: function () {
    if (this.projectGljSpread == null) this.initProjectGljSpread();
    //if(materialAdjustObj.spread == null) materialAdjustObj.initSpread();
    if (configMaterialObj.configSpread == null) configMaterialObj.initSpread();
  },
  initProjectGljSpread: function () {
    if (!this.projectGljSpread) {
      this.projectGljSpread = SheetDataHelper.createNewSpread($("#project_glj_sheet")[0], 2);
      sheetCommonObj.spreadDefaultStyle(this.projectGljSpread);
    }
    this.projectGljSpread.bind(GC.Spread.Sheets.Events.RangeChanged, this.onProjectGljRangeChange);
    this.projectGljSpread.getActiveSheet().options.frozenlineColor = "#ababab";
    this.initProjectGljSheet();
    this.initMaterialTreeSheet();
    //打开别人分享的项目，只读
    if (projectReadOnly) {
      //锁定逻辑走disabledSpread里的
      if (this.projectGljSetting.view.lockColumns) {
        this.projectGljSetting.view.lockColumns = null;
      }
      sheetCommonObj.disableSpread(this.projectGljSpread); //disableRightMenu("project_glj_sheet",this.projectGljSpread,this.rightClickCallback);
    } else {
      this.initProjectGljRightClick();
    }
  },
  initProjectGljSheet: function () {
    this.projectGljSheet = this.projectGljSpread.getSheet(0);

    this.initSheet(this.projectGljSheet, this.projectGljSetting);
    this.projectGljSheet.bind(GC.Spread.Sheets.Events.SelectionChanged, this.onProjectGljSelectionChange);
    this.projectGljSheet.bind(GC.Spread.Sheets.Events.EditStarting, this.onProjectGljEditStarting);
    this.projectGljSheet.bind(GC.Spread.Sheets.Events.CellDoubleClick, this.onProjectGljDoubleClick);
    this.projectGljSheet.name("projectGljSheet");
    this.projectGljSheet.setRowHeight(0, 36, 1);
  },
  initMixRatio: function () {
    let me = projectGljObject;
    if (me.mixRatioSpread == null) {
      me.initMixRatioSpread();
      if (!projectReadOnly) {
        me.initMixRatioRightClick();
      }
    }
  },
  initMixRatioSpread: function () {
    this.mixRatioSpread = SheetDataHelper.createNewSpread($("#mix_ratio_sheet")[0], 2);
    sheetCommonObj.spreadDefaultStyle(this.mixRatioSpread);
    this.mixRatioSheet = this.mixRatioSpread.getSheet(0);
    this.initSheet(this.mixRatioSheet, this.mixRatioSetting);
    this.mixRatioSheet.name("mixRatioSheet");
    this.mixRatioSheet.bind(GC.Spread.Sheets.Events.EditStarting, this.onMixRatioEditStarting);
    this.mixRatioSheet.bind(GC.Spread.Sheets.Events.RangeChanged, this.onMixRatioRangeChange);

    this.initRelatedRationSheet();
    if (projectReadOnly) {
      if (this.mixRatioSetting.view.lockColumns) {
        this.mixRatioSetting.view.lockColumns = null;
      }
      sheetCommonObj.disableSpread(this.mixRatioSpread);
    }
  },
  initRelatedRationSheet: function () {
    this.relatedRationSheet = this.mixRatioSpread.getSheet(1);
    sheetCommonObj.initSheet(this.relatedRationSheet, this.relatedRationSetting, 30);
    this.relatedRationSheet.name("relatedRation");
    this.relatedRationSheet.bind(GC.Spread.Sheets.Events.CellDoubleClick, this.onRelatedRationDoubleClick);
    //this.mixRatioSheet.bind(GC.Spread.Sheets.Events.RangeChanged, this.onMixRatioRangeChange);
  },

  initMaterialTreeSheet: function () {
    this.materialTreeSheet = this.projectGljSpread.getSheet(1);
    this.materialTreeSetting = this.createMaterialTreeSheetSetting();
    this.materialTree = cacheTree.createNew(this);
    this.materialTreeController = TREE_SHEET_CONTROLLER.createNew(this.materialTree, this.materialTreeSheet, this.materialTreeSetting);
    this.materialTreeController.bind(TREE_SHEET_CONTROLLER.eventName.treeSelectedChanged, this.onSelectionChange);
    this.materialTreeSheet.bind(GC.Spread.Sheets.Events.EditStarting, this.onProjectGljEditStarting);
    this.materialTreeSheet.bind(GC.Spread.Sheets.Events.ValueChanged, this.onProjectGLJValueChange);
    this.materialTreeSheet.name("materialTreeSheet");
    if (projectReadOnly && this.materialSetting.view.lockColumns) {
      if (this.materialSetting.view.lockColumns) {
        this.materialSetting.view.lockColumns = null;
      }
    }
  },
  createMaterialTreeSheetSetting: function () {
    return sheetCommonObj.transferToTreeSetting(this.materialSetting, this.materialTreeSetting);
  },
  unitPriceFileInit: function () {
    let me = this;
    let projectGLJ = projectObj.project.projectGLJ;
    let data = projectGLJ.datas;
    me.usedTenderList = data.usedTenderList !== undefined ? data.usedTenderList : [];
    me.usedUnitPriceInfo = data.constData.usedUnitPriceInfo !== undefined ? data.constData.usedUnitPriceInfo : {};
    $("#current-name").text(me.usedUnitPriceInfo.name);
    let usedCount = me.usedTenderList.length <= 0 ? 1 : me.usedTenderList.length;
    $("#used-project-count").text(usedCount);
    $("#editUnitFile").attr("href", `/unitPrice/index/${me.usedUnitPriceInfo.id}`);
  },
  getUsedTenderInfo: function () {
    return "人材机单价的变化，将自动影响以下单位工程造价：<br>" + projectGljObject.usedTenderList.join("<br>");
  },
  filterLibGLJForMixRatio: function () {
    let me = this;
    if (me.selectedProjectGLJ) {
      let showTypes = [];
      if (me.selectedProjectGLJ.type == gljType.MAIN_MATERIAL) {
        //对于主材，只显示没有组成物并且除了自已的主材
        showTypes = [gljType.MAIN_MATERIAL];
      } else if (_.includes(gljUtil.hasCompMaterial, me.selectedProjectGLJ.type)) {
        //混凝土、砂浆、配合比
        showTypes = [gljType.GENERAL_MATERIAL];
      } else if (_.includes(gljUtil.hasCompMachine, me.selectedProjectGLJ.type)) {
        //me.selectedProjectGLJ.type == gljType.GENERAL_MACHINE//机械中有组成物的类型
        showTypes = gljUtil.machineComposition;
      }
      gljOprObj.gljLibSheetData = _.filter(gljOprObj.gljLibSheetData, function (item) {
        if (me.selectedProjectGLJ.type == gljType.MAIN_MATERIAL) {
          let p_index = gljOprObj.getIndex(me.selectedProjectGLJ, gljKeyArray);
          let i_index = gljOprObj.getIndex(item, gljLibKeyArray);
          return item.gljType == gljType.MAIN_MATERIAL && item.component.length == 0 && p_index != i_index;
        } else {
          return _.includes(showTypes, item.gljType);
        }
      });
    }
  },
  addMixRatio: async function () {
    let me = this,
      projectGLJ = projectObj.project.projectGLJ;
    for (let mix of me.mixRatioData) {
      let m_key = gljUtil.getIndex(mix);
      _.remove(gljOprObj.GLJSelection, (n) => {
        return m_key == n;
      });
    }
    await me.addMixRatioFromLib(gljOprObj.GLJSelection, () => {
      me.showMixRatioData(); //这里添加的组成物的消耗量默认都是0，所以对父工料机的价格不会有影响，不用触发计算
      projectGLJ.loadData(function () {
        me.showProjectGljData();
        gljOprObj.showRationGLJSheetData();
        me.onUnitFileChange(me.selectedProjectGLJ);
      });
    });
  },
  addMixRatioFromLib: async function (selections, callback) {
    let gljList = [],
      allGLJ = gljOprObj.AllRecode;
    let url = "/glj/add-ratio";
    let result = null;
    if (selections.length == 0) {
      return;
    }
    try {
      for (let glj of allGLJ) {
        let i_key = gljUtil.getIndex(glj, gljLibKeyArray);
        if (_.includes(selections, i_key)) {
          let pglj = {
            glj_id: glj.ID,
            name: glj.name,
            code: glj.code,
            original_code: glj.code,
            unit: glj.unit,
            specs: glj.specs,
            base_price: glj.basePrice,
            market_price: glj.basePrice,
            shortName: glj.shortName,
            type: glj.gljType,
            model: glj.model,
            adjCoe: glj.adjCoe,
            from: "std",
            repositoryId: glj.repositoryId,
            materialType: glj.materialType,
            materialCoe: glj.materialCoe,
            grossWeightCoe: glj.grossWeightCoe,
            purchaseStorageRate: glj.purchaseStorageRate,
            offSiteTransportLossRate: glj.offSiteTransportLossRate,
            handlingLossRate: glj.handlingLossRate,
          };
          if (typeof projectObj !== "undefined") pglj.project_id = projectObj.project.ID();
          if (glj.hasOwnProperty("compilationId")) {
            pglj.from = "cpt";
            if (glj.code.indexOf("-") != -1) {
              //这条工料机是用户通过修改名称、规格、型号等保存到补充工料机库的
              pglj.original_code = glj.code.split("-")[0]; //取-前的编号作为原始编号
            }
          }
          gljList.push(pglj);
        }
      }
      gljList = _.sortByAll(gljList, ["type", "code"]);
      if (gljList.length == 0) return;
      let parentInfo = {};
      if (typeof unitPriceObj !== "undefined") {
        url = "/unitPrice/addMixRatio";
        pdata = unitPriceObj.getSelectedUnitPrice();
        parentInfo = {
          unit_price_file_id: pdata.unit_price_file_id,
          connect_key: gljUtil.getIndex(pdata),
        };
      } else {
        parentInfo = {
          unit_price_file_id: projectObj.project.property.unitPriceFile.id,
          connect_key: gljOprObj.getIndex(projectGljObject.selectedProjectGLJ, gljKeyArray),
        };
      }

      $.bootstrapLoading.start();
      result = await ajaxPost(url, { gljList: gljList, parentInfo: parentInfo });
      if (callback) callback(result);
    } catch (error) {
      alert(error);
      console.log(error);
    }
    $.bootstrapLoading.end();
    return result;
  },

  showMixRatioData: function () {
    let me = this,
      gljId = null,
      gljType = null;
    if (!$("#mixRatio-nav").hasClass("active")) return;
    me.mixRatioSpread.setActiveSheetIndex(0);
    let oldSel = me.mixRatioSheet.getSelections()[0];
    let projectGLJData = me.getProjectGLJSelected();
    if (projectGLJData) {
      gljId = projectGLJData.id;
      gljType = projectGLJData.type;
    }
    if (compositionTypes.indexOf(gljType) == -1) {
      //如果不是有组成物的类型，工料机id设置为空，组成物表设置为空
      gljId = null;
    }
    projectObj.project.projectGLJ.getRatioData(gljId, function (data) {
      if (gljId !== projectObj.project.projectGLJ.getRatioId) {
        //两个id不一致说明不是最新的请求，不用往下执行。
        return;
      }
      let ratioList = [];
      for (let glj of data) {
        ratioList.push(me.getMixRatioSheetData(glj));
      }
      ratioList = gljUtil.sortMixRatio(ratioList);
      me.mixRatioData = ratioList;
      me.mixRatioSheet.setRowCount(0);
      sheetCommonObj.showData(me.mixRatioSheet, me.mixRatioSetting, me.mixRatioData);
      me.mixRatioSheet.setRowCount(me.mixRatioData.length);
      me.mixRatioSheet.setSelection(oldSel.row == -1 ? 0 : oldSel.row, oldSel.col, oldSel.rowCount, oldSel.colCount);
    });
  },
  showRelatedRationDatas: function () {
    let me = this;
    if (!$("#ration-nav").hasClass("active")) return;
    me.mixRatioSpread.setActiveSheetIndex(1);
    let projectGLJData = me.getProjectGLJSelected();
    let rationIDMap = {};
    let rations = [];
    if (projectGLJData) {
      for (let rg of projectObj.project.ration_glj.datas) {
        if (rg.projectGLJID == projectGLJData.id) rationIDMap[rg.rationID] = true;
      }
      for (let r of projectObj.project.Ration.datas) {
        if (rationIDMap[r.ID] || (r.type == rationType.gljRation && r.projectGLJID == projectGLJData.id)) {
          let billNode = projectObj.project.mainTree.findNode(r.billsItemID); ////如果定额工料的父项没有找到，则忽略
          if (!billNode) continue;
          rations.push(r);
        }
      }
    }
    this.relatedRationSheetData = rations;
    sheetCommonObj.showData(me.relatedRationSheet, me.relatedRationSetting, rations);
    me.relatedRationSheet.setRowCount(rations.length);
  },

  getMixRatioSheetData: function (glj) {
    let data = {
      id: glj.id,
      mix_ratio_id: glj.ratio_data.id,
      code: glj.code,
      name: glj.name,
      specs: glj.specs,
      unit: glj.unit,
      type: glj.type,
      short_name: projectObj.project.projectGLJ.getShortNameByID(glj.type),
      consumption: glj.ratio_data.consumption,
      unit_price: glj.unit_price,
      connect_key: glj.ratio_data.connect_key,
    };
    gljOprObj.setGLJPrice(data, glj);
    return data;
  },
  onProjectGljEditStarting: function (sender, args) {
    let me = projectGljObject;
    let row = args.row;
    let col = args.col;
    if (me.projectGljEditChecking(row, col) == false) {
      args.cancel = true;
    }
  },
  projectGljEditChecking: function (row, col, isPaste = false) {
    //return false表示不能编辑
    let me = projectGljObject;
    let data = null,
      setting = null;
    let sheet = me.projectGljSpread.getActiveSheet();
    if (sheet.name() == "projectGljSheet") {
      if (row >= me.projectGljSheetData.length) return false;
      data = me.projectGljSheetData[row];
      setting = me.projectGljSetting;
    } else if (sheet.name() == "materialTreeSheet") {
      data = me.materialTree.selected.data;
      setting = me.materialSetting;
      let notEditId = ["GC", "GJ", "MC", "SN", "SZ"];
      if (notEditId.indexOf(data.id) != -1) {
        return false;
      }
    }
    let dataCode = setting.header[col].dataCode;
    let lockColumns = setting.view.lockColumns;

    if (lockColumns.indexOf(col) != -1) {
      return false;
    }

    if (isPaste == false && (dataCode == "is_adjust_price" || dataCode == "is_evaluate" || dataCode == "is_main_material" || dataCode == "is_eval_material")) {
      //除了粘贴，拖动填充等操作，其它的都不能编辑
      return false;
    }
    if (dataCode == "basePrice" || dataCode == "marketPrice" || dataCode == "supply") {
      //有组成物时，市场单价、定额价、供货方式不能修改
      if ((dataCode == "basePrice" || dataCode == "marketPrice") && gljUtil.isConcreteType(data.type)) {
        //混凝土，浆砂，配合比，不能修改市场单价，定额价
        return false;
      }
      if (data.ratio_data && data.ratio_data.length > 0) {
        return false;
      }
      if (dataCode == "basePrice" && data.is_add != 1) {
        //如果不是新增，定额价不可修改。
        return false;
      }
      if (dataCode == "marketPrice" && data.calcMaterial == 1) return false; //有材料计算时不能修改
    }
    if (dataCode == "supply_quantity") {
      if (data.supply != 1) {
        // 如果为部分甲供则甲供数量需要可编辑,其它的都不能编辑
        return false;
      }
    }
    if (dataCode == "materialCoe") {
      //三材类别为空时，三材系数应只读，不允许输入。
      if (data.materialType == undefined || data.materialType == null || data.materialType == "") {
        return false;
      }
    }
    return true;
  },
  onSelectionChange: function () {
    let me = projectGljObject;
    me.showMixRatioData();
    me.materialTreeSheet.repaint();
  },
  onProjectGljDoubleClick: function (sender, args) {
    let me = projectGljObject;
    let recode = me.projectGljSheetData[args.row];
    let dataCode = me.projectGljSetting.header[args.col].dataCode;
    if (dataCode == "name" && recode && gljUtil.isMaterialType(recode.type)) projectObj.project.projectGLJ.updateCalcMaterial(recode, 1);
  },
  onRelatedRationDoubleClick: function (sender, args) {
    let me = projectGljObject;
    let record = me.relatedRationSheetData[args.row];
    $("#tab_zaojiashu").click();
    locateObject.locateNode(record.ID);
  },
  setSelectionWhenMaterialChange: function (material) {
    if (material) {
      let i = _.findIndex(this.projectGljSheetData, { id: material.id });
      if (i != -1) {
        let os = this.projectGljSheet.getSelections();
        let ns = [{ col: os[0].col, colCount: 1, row: i, rowCount: 1 }];
        this.projectGljSheet.setSelection(ns[0].row, ns[0].col, ns[0].rowCount, ns[0].colCount);
        this.projectGljSheet.showRow(i, GC.Spread.Sheets.VerticalPosition.center);
        this.onProjectGljSelectionChange({}, { newSelections: ns, oldSelections: os }, true);
      }
    }
  },
  onProjectGljSelectionChange: function (sender, args, fromMaterial = false) {
    let me = projectGljObject;
    console.log(args);
    let newSel = args.newSelections[0];
    let oldSel = args.oldSelections ? args.oldSelections[0] : {};
    me.projectGljSheet.suspendPaint();
    me.projectGljSheet.suspendEvent();
    if (newSel.row != oldSel.row) {
      let style = gljOprObj.getSelStyle(true, {});
      me.projectGljSheet.setStyle(newSel.row, -1, style);
      let orow = oldSel.row == "" || oldSel.row == -1 ? 0 : oldSel.row;
      if (me.projectGljSheetData[orow]) {
        let tstyle = gljOprObj.getSelStyle(false, {}, me.projectGljSheetData[orow].bgColour);
        me.projectGljSheet.setStyle(orow, -1, tstyle);
        me.projectGljRowChang(fromMaterial);
      }
    } else {
      me.projectGljSheet.repaint();
    }
    me.projectGljSheet.resumeEvent();
    me.projectGljSheet.resumePaint();
  },
  projectGljRowChang: function (fromMaterial) {
    let me = projectGljObject;
    let sel = me.mixRatioSheet.getSelections()[0];
    sel.row = -1;
    sel.col = 0;
    sel.rowCount = 1;
    sel.colCount = 1;
    me.showMixRatioData();
    me.showRelatedRationDatas();
    if (fromMaterial != true) materialCalcObj.showDatas();
  },
  rightClickCallback: function (row) {
    let me = projectGljObject;
    let sheet = me.projectGljSpread.getActiveSheet();
    if (sheet.name() == "projectGljSheet") {
      me.projectGljRowChang(row);
    } else if (sheet.name() == "materialTreeSheet") {
      me.materialTreeController.setTreeSelected(me.materialTreeController.tree.items[row]);
    }
  },
  onProjectGljRangeChange: function (sender, info) {
    let me = projectGljObject;
    let changeInfo = [];
    let canChange = true;
    if (info.action == GC.Spread.Sheets.RangeChangedAction.clear) {
      if (me.projectGljEditChecking(info.row, info.col) == false) {
        canChange = false;
      } else {
        info.newValue = null;
        me.onProjectGLJValueChange(sender, info);
        return;
      }
    }
    for (let c of info.changedCells) {
      let value = info.sheet.getCell(c.row, c.col).text();
      changeInfo.push({ row: c.row, col: c.col, value: value });
      if (me.projectGljEditChecking(c.row, c.col, true) == false) {
        //如果不能编辑
        canChange = false;
        break;
      }
      if (!me.checkData(c.col, me.projectGljSetting, value)) {
        alert("输入的数据类型不对，请重新输入!");
        canChange = false;
        break;
      }
    }
    if (canChange == false) {
      //恢复原来的值
      info.sheetName == "materialTreeSheet" ? me.showMaterialTreeData() : me.showProjectGljData();
    } else if (info.sheetName == "projectGljSheet") {
      me.batchUpdateProjectGLJ(changeInfo, info.sheetName);
    }
  },
  onMixRatioEditStarting: function (sender, info) {
    let me = projectGljObject,
      row = info.row,
      col = info.col;
    let parentSheet = me.projectGljSpread.getActiveSheet();
    let prow = parentSheet.getActiveRowIndex(); //取父机械或组成物的下标
    let prowData = parentSheet.name() == "projectGljSheet" ? me.projectGljSheetData[prow] : me.materialTree.items[prow].data;
    console.log(prowData);
    if (gljUtil.isConcreteType(prowData.type)) info.cancel = true;
  },
  onMixRatioRangeChange: function (sender, info) {
    let me = projectGljObject;
    let canChange = true;
    let changeInfo = [];
    /*  if (info.action == GC.Spread.Sheets.RangeChangedAction.clear) {
            info.newValue = 0;
            me.onMixRatioValueChange(sender,info);
            info.sheet.getCell(info.row, info.col).text(0);
            return ;
        } */
    for (let c of info.changedCells) {
      let value = info.sheet.getCell(c.row, c.col).text();
      if (_.isEmpty(value)) value = 0;
      if (!me.checkData(c.col, me.mixRatioSetting, value)) {
        alert("输入的数据类型不对，请重新输入!");
        canChange = false;
        break;
      } else {
        changeInfo.push({ row: c.row, col: c.col, value: value });
      }
    }
    if (canChange == false) me.showMixRatioData(); //数据类型不对

    if (changeInfo.length > 0) me.batchUpdateConsumption(changeInfo);
  },
  batchUpdateProjectGLJ: function (changeInfo, sheetName) {
    let projectGLJ = projectObj.project.projectGLJ;
    let me = projectGljObject;
    let propertyCells = [],
      priceCells = [];
    let setting = sheetName == "materialTreeSheet" ? me.materialSetting : me.projectGljSetting;
    for (let c of changeInfo) {
      c.dataCode = setting.header[c.col].dataCode;
      if (c.dataCode == "basePrice" || c.dataCode == "marketPrice") {
        priceCells.push(c);
      } else {
        propertyCells.push(c);
      }
    }
    me.batchUpdateGLJProperty(propertyCells, sheetName, function () {
      //价格属于单价文件表，如果与项目工料机的其它属性一起的话计算起来会比较复杂，同时出现价格与其它属性一起更新的情况也会比较少;
      projectGLJ.batchUpdatePrice(priceCells, sheetName, function (impactList) {
        me.refreshBySheetName(sheetName);
        gljOprObj.refreshView();
      });
    });
  },
  refreshBySheetName: function (sheetName) {
    let me = projectGljObject;
    if (sheetName == "projectGljSheet") {
      me.showProjectGljData();
    } else if (sheetName == "materialTreeSheet") {
      me.showMaterialTreeData();
    }
  },
  batchUpdateGLJProperty: function (changeInfo, sheetName, callback) {
    let me = projectGljObject,
      updateMap = {};
    let projectGLJ = projectObj.project.projectGLJ;
    for (let c of changeInfo) {
      let recode = sheetName == "materialTreeSheet" ? me.materialTree.items[c.row].data : me.projectGljSheetData[c.row];
      if (recode[c.dataCode] == c.value) {
        continue;
      }
      me.getUpdateData(recode.id, c.value, c.dataCode, recode.quantity, updateMap);
    }
    if (_.isEmpty(updateMap)) {
      callback ? callback() : "";
      return;
    }
    projectGLJ.batchUpdateGLJProperty(updateMap, callback);
  },
  getUpdateData: function (id, value, dataCode, quantity, updateMap) {
    let me = projectGljObject;
    let supplyMap = { 自行采购: 0, 部分甲供: 1, 完全甲供: 2, 甲定乙供: 3 };
    let materialMap = { 钢材: 1, 钢筋: 2, 木材: 3, 水泥: 4, 标准砖: 5 };
    let data = updateMap[id] ? updateMap[id] : {};
    //供货方式 和三材类型 粘贴和填充过来的数据，要做对应转换，因为这里value只是中文文本，并不是实际的值
    // 如果是供货方式则需要处理数据
    if (dataCode === "supply") {
      if (supplyMap[value] !== undefined || supplyMap[value] !== null) {
        value = supplyMap[value];
      }
      data.supply_quantity = me.getSupplyQuantity(value, quantity);
    }
    if (dataCode === "supply_quantity") {
      //修改数量需做4舍5入
      value = scMathUtil.roundForObj(value, getDecimal("glj.quantity"));
    }
    if (dataCode === "is_evaluate" || dataCode === "is_adjust_price" || dataCode === "is_main_material") {
      value = value ? 1 : 0;
    }
    if (dataCode === "materialType") {
      //三材类型要做对应转换，因为这里value只是中文文本，并不是实际的值
      if (materialMap[value] !== undefined || materialMap[value] !== null) {
        value = materialMap[value];
      }
      if (value == null || value == "") {
        //删除三材类别时，清空三材系数
        value = null;
        data.materialCoe = null;
      }
    }
    if (dataCode == "materialCoe") {
      value = scMathUtil.roundForObj(value, getDecimal("material"));
    }

    data[dataCode] = value;
    updateMap[id] = data;
  },
  batchUpdateConsumption: function (changeInfo) {
    let projectGLJ = projectObj.project.projectGLJ;
    let me = projectGljObject;
    let updateMap = {},
      updateData = [],
      parentBasePrice = 0,
      parentMarketPrice = 0;
    let parentKey = "",
      unit_price_file_id = null;
    for (let c of changeInfo) {
      let record = me.mixRatioData[c.row];
      let value = scMathUtil.roundForObj(c.value, getDecimal("glj.quantity"));
      updateMap[record.mix_ratio_id] = { consumption: value, record: record };
      updateData.push({ type: "mix_ratio", query: { id: record.mix_ratio_id }, doc: { consumption: value } });
      parentKey = record.connect_key;
      unit_price_file_id = record.unit_price.unit_price_file_id;
    }
    if (!gljUtil.isConcreteType(parseInt(parentKey.split("|-|")[4]))) {
      //父类型不属于混凝土浆砂配合比，才要计算
      for (let sub of me.mixRatioData) {
        let marketPrice = scMathUtil.roundForObj(sub.unit_price.market_price, getDecimal("process"));
        let basePrice = scMathUtil.roundForObj(sub.unit_price.base_price, getDecimal("process"));
        let consumption = updateMap[sub.mix_ratio_id]
          ? updateMap[sub.mix_ratio_id].consumption
          : scMathUtil.roundForObj(sub.consumption, getDecimal("glj.quantity"));
        parentMarketPrice = scMathUtil.roundForObj(marketPrice * consumption + parentMarketPrice, getDecimal("process"));
        // parentBasePrice = scMathUtil.roundForObj(basePrice*consumption + parentBasePrice,getDecimal("process"));
      }
    }
    // parentBasePrice = scMathUtil.roundForObj(parentBasePrice,getDecimal("glj.unitPrice"));
    parentMarketPrice = scMathUtil.roundForObj(parentMarketPrice, getDecimal("glj.unitPrice"));
    let parentData = me.getProjectGLJSelected();
    if (parentData) {
      //计算受影响的综合电价
      let ext = {};
      ext[parentData.id] = { marketPrice: parentMarketPrice };
      let elecP = electrovalenceObj.clacNewElecPrice(ext);
      if (elecP) {
        updateData.push({ type: "unitPrice", projectGLJID: elecP.projectGLJID, query: { id: elecP.id }, doc: elecP.doc });
      }
      updateData.push({
        type: "unitPrice",
        isParent: true,
        projectGLJID: parentData.id,
        query: { id: parentData.unit_price.id },
        doc: { market_price: parentMarketPrice },
      }); //base_price:parentBasePrice,
    }

    // updateData.push({type:'parent',connect_key:parentKey,base_price:parentBasePrice,market_price:parentMarketPrice,unit_price_file_id:unit_price_file_id});
    projectGLJ.batchUpdateConsumption(updateData, updateMap, async function () {
      //更新人材机汇总表
      me.refreshDataSheet();
      let materialGljList = await projectGLJ.calcAllMaterialWhenChange();
      if (materialGljList.length == 0) me.onUnitFileChange(true);
      gljOprObj.refreshView();
    });
  },
  showProjectGljData: function () {
    let me = this;
    this.projectGljSpread.setActiveSheetIndex(0);
    let sel = this.projectGljSheet.getSelections()[0];
    let oldData = sel.row < this.projectGljSheetData.length ? this.projectGljSheetData[sel.row] : "";
    let projectGljSheetData = [];
    let gljList = projectObj.project.projectGLJ.datas.gljList;
    gljList = this.filterProjectGLJ(gljList);
    gljList = sortProjectGLJ(gljList);
    for (let glj of gljList) {
      projectGljSheetData.push(this.getSheetDataByGLJ(glj));
    }
    this.projectGljSheetData = projectGljSheetData;
    this.projectGljSheet.setRowCount(this.projectGljSheetData.length);
    sheetCommonObj.showData(this.projectGljSheet, this.projectGljSetting, this.projectGljSheetData, null, function () {
      //this.projectGljSheet.setRowCount(this.projectGljSheetData.length);
      sel.row = oldData ? _.findIndex(me.projectGljSheetData, { id: oldData.id }) : 0;
      me.projectGljSheet.setSelection(sel.row == -1 ? 0 : sel.row, sel.col, sel.rowCount, sel.colCount);
    });
  },
  showMaterialTreeData: function () {
    this.projectGljSpread.setActiveSheetIndex(1);
    let sel = this.materialTreeSheet.getSelections()[0];
    let oldNodeID = this.materialTree.selected ? this.materialTree.selected.data.id : "";
    let gljList = projectObj.project.projectGLJ.datas.gljList;
    gljList = _.sortByAll(gljList, ["code"]);
    this.createMaterialTree(gljList);
    this.materialTreeController.showTreeData();
    let newNode = this.materialTree.getNodeByID(oldNodeID);
    sel.row = newNode ? newNode.serialNo() : -1;
    this.materialTreeSheet.setSelection(sel.row == -1 ? 0 : sel.row, sel.col, sel.rowCount, sel.colCount);
    this.materialTreeController.setTreeSelected(this.materialTree.items[sel.row == -1 ? 0 : sel.row]);
  },
  initSheetViews() {
    let me = projectGljObject;
    if (me.displayType == filterType.ZGCL || me.displayType == filterType.PBCL) {
      configMaterialObj.setNavLinkText(me.displayType);
      $("#project-glj-main").hide();
      $("#config_material").show();
    } else {
      $("#config_material").hide();
      $("#project-glj-main").show();
    }
  },
  refreshViewsData: function () {
    let me = projectGljObject;
    if (me.displayType == filterType.ZGCL || me.displayType == filterType.PBCL) return configMaterialObj.refreshSheetDatas();
    me.refreshDataSheet();
  },
  refreshDataSheet: function (refresh) {
    //refresh = true 的时候不用更新表头信息
    let me = projectGljObject;
    if (!me.projectGljSpread) return;
    if (!refresh) {
      let quantityCol = _.findIndex(me.projectGljSetting.header, function (header) {
        return header.dataCode == "quantity" || header.dataCode == "techQuantity" || header.dataCode == "subdivisionQuantity";
      });
      if (me.displayType == filterType.FBFX) {
        //分部分项人材机，将“总消耗量”替换显示为“分部分项总消耗量”。
        me.projectGljSetting.header[quantityCol].dataCode = "subdivisionQuantity";
        if (me.projectGljSheet) me.projectGljSheet.setValue(0, quantityCol, "分部分项总消耗量", GC.Spread.Sheets.SheetArea.colHeader);
      } else if (me.displayType == filterType.TECH) {
        //措施项目人材机，将“总消耗量”替换显示为“措施项目总消耗量”。
        me.projectGljSetting.header[quantityCol].dataCode = "techQuantity";
        if (me.projectGljSheet) me.projectGljSheet.setValue(0, quantityCol, "措施项目总消耗量", GC.Spread.Sheets.SheetArea.colHeader);
      } else {
        me.projectGljSetting.header[quantityCol].dataCode = "quantity";
        if (me.projectGljSheet) me.projectGljSheet.setValue(0, quantityCol, "总消耗量", GC.Spread.Sheets.SheetArea.colHeader);
      }
    }
    if (me.displayType == filterType.SCHZ) {
      //三材汇总树节点
      me.showMaterialTreeData();
    } else {
      me.showProjectGljData();
      me.showMixRatioData();
      me.showRelatedRationDatas();
    }
  },
  createMaterialTree: function (gljList) {
    let me = projectGljObject;
    let q_decimal = getDecimal("glj.quantity");
    let GC = { id: "GC", name: materialType[materialTypeMap.GC], code: "GC", unit: "t", ParentID: -1, NextSiblingID: "MC" };
    let GJ = { id: "GJ", name: materialType[materialTypeMap.GJ], code: "GJ", unit: "t", ParentID: "GC", NextSiblingID: -1 };
    let MC = { id: "MC", name: materialType[materialTypeMap.MC], code: "MC", unit: "m3", ParentID: -1, NextSiblingID: "SN" };
    let SN = { id: "SN", name: materialType[materialTypeMap.SN], code: "SN", unit: "t", ParentID: -1, NextSiblingID: "SZ" };
    let SZ = { id: "SZ", name: materialType[materialTypeMap.SZ], code: "BZZ", unit: "千块", ParentID: -1, NextSiblingID: -1 };
    let rootDatas = [GC, GJ, MC, SN, SZ];
    let parentMap = {};
    let sumMap = {};
    (this.materialTree.nodes = {}), (this.materialTree.selected = null), (this.materialTree.roots = []), (this.materialTree.items = []);
    for (let r of rootDatas) {
      let baseNode = null;
      if (r.id == "GJ") {
        baseNode = createMaterialNode(r, parentMap["GC"], null); //钢筋的父节点为钢材
      } else {
        baseNode = createMaterialNode(r, null, null);
      }
      parentMap[r.id] = baseNode;
    }
    for (let g of gljList) {
      if (g.quantity !== 0 && g.quantity !== "0") {
        if (g.materialType) {
          let tem = me.getMaterialSheetDataByGLJ(g);
          if (tem.materialQuantity) {
            sumMap[g.materialType] = sumMap[g.materialType] ? sumMap[g.materialType] + tem.materialQuantity : tem.materialQuantity;
            tem.materialQuantity = scMathUtil.roundToString(tem.materialQuantity, q_decimal); //转成string
          }
          if (g.materialType == materialTypeMap.GC) {
            //钢材的下一节点是钢筋
            createMaterialNode(tem, parentMap["GC"], parentMap["GJ"]);
          } else {
            createMaterialNode(tem, parentMap[materialTypeMap[g.materialType]]);
          }
        }
      }
    }
    for (let mkey in sumMap) {
      if (mkey == materialTypeMap.GC && sumMap[materialTypeMap.GJ]) {
        //钢材汇总要加上钢筋的总量
        parentMap["GC"].data.materialQuantity = scMathUtil.roundToString(sumMap[mkey] + sumMap[materialTypeMap.GJ], q_decimal);
      } else {
        parentMap[materialTypeMap[mkey]].data.materialQuantity = scMathUtil.roundToString(sumMap[mkey], q_decimal);
      }
    }
    this.materialTree.sortTreeItems();
    function createMaterialNode(data, parent, next) {
      let newNode = me.materialTree.addNode(parent, next, data.id);
      newNode.data = data;
      return newNode;
    }
  },
  getMaterialSheetDataByGLJ: function (glj) {
    let q_decimal = getDecimal("glj.quantity");
    let m_decimal = getDecimal("material");
    let p_decimal = getDecimal("glj.unitPrice");
    let projectGLJ = projectObj.project.projectGLJ;
    let data = {
      id: glj.id,
      code: glj.code,
      name: glj.name,
      specs: glj.specs,
      unit: glj.unit,
      type: glj.type,
      short_name: projectGLJ.getShortNameByID(glj.type),
      quantity: scMathUtil.roundToString(glj.quantity, q_decimal),
      supply: glj.supply,
      supply_quantity: glj.supply_quantity,
      materialType: glj.materialType,
      delivery: glj.delivery,
      delivery_address: glj.delivery_address,
      is_adjust_price: glj.is_adjust_price,
      ratio_data: glj.ratio_data,
      is_add: glj.unit_price.is_add,
      bgColour: "white",
    };
    if (glj.materialCoe) {
      data.materialCoe = scMathUtil.roundForObj(glj.materialCoe, m_decimal);
      data.materialQuantity = scMathUtil.roundForObj(glj.materialCoe * glj.quantity, q_decimal); //还要做汇总，汇总完再转成string
    }
    gljOprObj.setGLJPrice(data, glj);
    data.basePrice = scMathUtil.roundToString(data.basePrice, p_decimal);
    data.marketPrice = scMathUtil.roundToString(data.marketPrice, p_decimal);
    return data;
  },
  filterProjectGLJ: function (gljList) {
    let me = projectGljObject;
    if (gljList.length > 0) {
      gljList = _.filter(gljList, function (item) {
        return me.displayTypeFilter(item);
      });
    }
    return gljList;
  },
  displayTypeFilter: function (item) {
    let me = this;
    if (item.quantity !== 0 && item.quantity !== "0") {
      //过滤掉消耗量为0的工料机
      if (me.displayType == filterType.ALL) {
        //所有工料机
        return true;
      } else if (filterTypeArray.indexOf(me.displayType) != -1) {
        //人工、材料、机械、主材、设备
        let typeString = item.type + "";
        return typeString.startsWith(me.displayType);
      } else if (me.displayType == filterType.FBFX) {
        //“分部分项总消耗量”≠0的工料机行
        return item.subdivisionQuantity !== 0 && item.subdivisionQuantity !== "0";
      } else if (me.displayType == filterType.TECH) {
        //筛选“措施项目总消耗量”≠0的工料机行
        return item.techQuantity !== 0 && item.techQuantity !== "0";
      } else if (me.displayType == filterType.JGCL) {
        //筛选“供货方式”=“完全甲供”或“部分甲供”的工料机行
        return item.supply == supplyType.WQJG || item.supply == supplyType.BFJG;
      } else if (me.displayType == filterType.ZGCL) {
        //筛选“是否暂估”=“是”的工料机行。
        return item.is_evaluate == 1;
      } else if (me.displayType == filterType.ZYCL) {
        //筛选“主要材料”=“是”的工料机行。
        return item.is_main_material == 1;
      }
    }
    return false;
  },
  getSheetDataByGLJ: function (glj) {
    let projectGLJ = projectObj.project.projectGLJ;
    let materialIdList = projectGLJ.datas.constData.materialIdList;
    let data = {
      id: glj.id,
      code: glj.code,
      name: glj.name,
      specs: glj.specs,
      unit: glj.unit,
      type: glj.type,
      short_name: projectGLJ.getShortNameByID(glj.type),
      quantity: glj.quantity,
      tenderQuantity: glj.tenderQuantity,
      supply: glj.supply,
      supply_quantity: glj.supply_quantity,
      materialType: glj.materialType,
      materialCoe: glj.materialCoe,
      grossWeightCoe: glj.grossWeightCoe,
      purchaseStorageRate: glj.purchaseStorageRate,
      offSiteTransportLossRate: glj.offSiteTransportLossRate,
      handlingLossRate: glj.handlingLossRate,
      delivery: glj.delivery,
      delivery_address: glj.delivery_address,
      is_adjust_price: glj.is_adjust_price,
      ratio_data: glj.ratio_data,
      unit_price: glj.unit_price,
      calcMaterial: glj.unit_price.calcMaterial,
      is_add: glj.unit_price.is_add,
      bgColour: "white",
      techQuantity: glj.techQuantity,
      subdivisionQuantity: glj.subdivisionQuantity,
      remark: glj.remark,
    };
    gljOprObj.setGLJPrice(data, glj);

    data.is_main_material = glj.is_main_material == 1 ? 1 : 0;
    //供货方式为完全甲供时设置甲供数量为总消耗量
    if (data.supply == 2) {
      data.supply_quantity = glj.quantity;
    }
    // 只有材料才显示是否暂估
    if (materialIdList.indexOf(glj.type) >= 0) {
      data.is_evaluate = glj.is_evaluate;
    }
    //是“材料”、“主材”、“设备”时显示评标材料
    if (materialIdList.indexOf(glj.type) >= 0 || glj.type == gljType.MAIN_MATERIAL || glj.type == gljType.EQUIPMENT)
      data.is_eval_material = glj.is_eval_material ? glj.is_eval_material : 0;

    if (glj.materialCoe !== null && glj.materialCoe !== undefined) {
      data.materialCoe = scMathUtil.roundForObj(glj.materialCoe, getDecimal("material"));
    }
    //bgColour
    if (data.basePrice == data.marketPrice) {
      //如果定额价等于市场价时，改底色。 优先度低于有组成物时的底色
      data.bgColour = "#C4CAFB";
    }
    if (gljUtil.notEditType.indexOf(glj.type) >= 0) {
      if (data.ratio_data && data.ratio_data.length > 0) {
        //有组成物时
        //设置底色
        data.bgColour = "#E0E0E0";
      }
    }
    if (gljUtil.isConcreteType(glj.type)) data.bgColour = "#E0E0E0"; //混凝土、砂浆、配合比的底色显示为 灰色#E0E0E0,灰色底色提醒用户不可修改。
    return data;
  },
  refreshProjectGljRow: function (row) {
    let me = projectGljObject;
    let rowData = me.projectGljSheetData[row];
    let glj = projectObj.project.projectGLJ.getByID(rowData.id);
    let newRow = null;
    if (glj) {
      newRow = me.getSheetDataByGLJ(glj);
    }
    if (me.displayTypeFilter(newRow) == true) {
      me.projectGljSheetData[row] = newRow;
      sheetCommonObj.showRowData(this.projectGljSheet, this.projectGljSetting, row, this.projectGljSheetData);
    } else {
      me.projectGljSheetData.splice(row, 1);
      me.projectGljSheet.deleteRows(row, 1);
      me.showMixRatioData();
      me.showRelatedRationDatas();
    }
    //me.projectGljSheetData[row] = me.getSheetDataByGLJ(glj);
  },
  initSheet: function (sheet, setting) {
    var me = this;
    sheetCommonObj.initSheet(sheet, setting, 30);
    sheet.bind(GC.Spread.Sheets.Events.ValueChanged, me.onSheetValueChange);
  },
  onSheetValueChange: function (e, info) {
    let me = projectGljObject;
    if (info.sheetName == "projectGljSheet") {
      me.onProjectGLJValueChange(e, info);
    } else if (info.sheetName == "mixRatioSheet") {
      me.onMixRatioValueChange(e, info);
    }
  },
  onMixRatioValueChange: function (e, info) {
    let composition = projectObj.project.composition;
    let me = projectGljObject,
      row = info.row,
      col = info.col;
    let dataCode = me.mixRatioSetting.header[col].dataCode;
    let recode = me.mixRatioData[row];
    let value = info.newValue;
    let parentSheet = me.projectGljSpread.getActiveSheet(); //三材汇总表和工料机汇总表
    if (!me.checkData(col, me.mixRatioSetting, value)) {
      alert("输入的数据类型不对，请重新输入!");
      me.mixRatioSheet.setValue(row, col, info.oldValue);
      return false;
    }
    value = scMathUtil.roundToString(value, getDecimal("glj.quantity"));
    me.batchUpdateConsumption([{ row: row, col: col, value }]);
  },
  onUnitFileChange: function (isInclude, changeMark = "unitFile") {
    //include用来标计是否排除本身， true时，不排除本身
    if (isInclude == true) projectObj.project.projectInfo.changeMark = changeMark; //项目单价文件修改标记
    projectObj.project.markUpdateProject(
      { projectID: projectObj.project.ID(), unitFileID: socketObject.getUnitFileRoomID(), isInclude: isInclude },
      "unitFile",
      function () {
        //socket.emit('unitFileChangeNotify', JSON.stringify(data));
        socket.emit("unitFileChangeNotify", { projectID: projectObj.project.ID(), userID: userID, unitFileID: socketObject.getUnitFileRoomID() });
      }
    );
  },
  deleteMixRatio: function (row) {
    let me = this,
      deleteRecode = me.mixRatioData[row];
    let consumption = deleteRecode.consumption;
    let [parentMarketPrice, parentBasePrice] = me.getCompositionSumPrice("delete", row);
    let prowData = me.getProjectGLJSelected();
    let updateData = { id: deleteRecode.mix_ratio_id, field: "mix_ratio.consumption", value: 0, market_price: parentMarketPrice, base_price: parentBasePrice };
    let ext = {};
    ext[prowData.id] = { marketPrice: parentMarketPrice };
    updateData.parent = { query: { id: prowData.unit_price.id }, doc: { market_price: parentMarketPrice } };
    let elecP = electrovalenceObj.clacNewElecPrice(ext);
    if (elecP) {
      updateData.unitPrice = { projectGLJID: elecP.projectGLJID, query: { id: elecP.id }, doc: elecP.doc };
    }
    projectObj.project.composition.deleteComposition(updateData, deleteRecode, prowData.id, function () {
      _.remove(me.mixRatioData, { mix_ratio_id: deleteRecode.mix_ratio_id });
      //me.refreshParentData(prow,prowData.id);
      me.refreshDataSheet();
      me.mixRatioSheet.deleteRows(row, 1);
      me.onUnitFileChange(true);
    });
  },
  getCompositionSumPrice: function (scene, affectRow, newValue = 0) {
    let me = this;
    let parentMarketPrice = 0;
    let parentBasePrice = 0;
    let parentKey = me.mixRatioData[affectRow].connect_key;
    let parentType = parentKey.split("|-|")[4];
    if (gljUtil.isConcreteType(parseInt(parentType))) return [0, 0]; //父工料机是混凝土浆砂，配合比，则父价格为0，不用计算
    for (let i = 0; i < me.mixRatioData.length; i++) {
      let ratio = me.mixRatioData[i];
      let marketPrice = ratio.unit_price.market_price;
      let basePrice = ratio.unit_price.base_price;
      // 如果是删除则忽略即将被删除的行数据
      if (scene === "delete" && affectRow === i) {
        continue;
      }
      let consumption = i === affectRow ? newValue : ratio.consumption;
      parentMarketPrice += operationWithRound(consumption, marketPrice, "glj.unitPrice", "*");
      parentBasePrice += operationWithRound(consumption, basePrice, "glj.unitPrice", "*");
    }
    parentMarketPrice = parentMarketPrice.toDecimal(getDecimal("glj.unitPrice"));
    parentBasePrice = parentBasePrice.toDecimal(getDecimal("glj.unitPrice"));
    return [parentMarketPrice, parentBasePrice];
  },
  onProjectGLJValueChange: function (e, info) {
    //me.projectGljSetting
    let projectGLJ = projectObj.project.projectGLJ;
    let me = projectGljObject,
      row = info.row,
      col = info.col;
    let setting = info.sheetName == "materialTreeSheet" ? me.materialSetting : me.projectGljSetting;
    let dataCode = setting.header[col].dataCode;
    let recode = info.sheetName == "materialTreeSheet" ? me.materialTree.selected.data : me.projectGljSheetData[row];
    let value = info.newValue;
    if (info.newValue === undefined) {
      return;
    }
    if (value && !me.checkData(col, setting, value)) {
      alert("输入的数据类型不对，请重新输入!");
      info.sheetName == "materialTreeSheet" ? me.materialTreeController.refreshTreeNode([me.materialTree.selected]) : me.refreshProjectGljRow(row);
      return;
    }
    let callback = function (impactList) {
      info.sheet.suspendPaint();
      info.sheet.suspendEvent();
      if (dataCode === "is_adjust_price") {
        projectGLJ.calcQuantity();
      }

      if (info.sheetName == "materialTreeSheet") {
        me.showMaterialTreeData();
      } else {
        // me.refreshProjectGljRow(row);
        me.showProjectGljData();
        for (let g of impactList) {
          me.refreshProjectGljRowByID(g.id, row);
        }
      }
      info.sheet.resumeEvent();
      info.sheet.resumePaint();
      if (dataCode === "supply" || dataCode === "supply_quantity" || dataCode === "is_adjust_price") {
        // basePrice、marketPrice 有自己的计算代码，无需走这里重复计算
        let rations = calcTools.getRationsByProjectGLJ(recode.id);
        projectObj.project.calcProgram.calcNodesAndSave(rations, function () {
          projectObj.mainController.refreshTreeNode(projectObj.project.mainTree.roots);
        });
      }

      gljOprObj.refreshView();
    };
    if (dataCode == "basePrice" || dataCode == "marketPrice") {
      //修改市场价和修改定额价时需要重新记算很多受影响的树节点，现在改成与定字额工料机那里调相同的方法。
      let editField = dataCode === "basePrice" ? "base_price" : "market_price";
      projectObj.project.projectGLJ.updatePrice(recode, editField, value, "pg", callback);
    } else {
      let extend = {};
      // 如果是供货方式则需要处理数据
      if (dataCode === "supply") {
        extend.supply_quantity = me.getSupplyQuantity(value, recode.quantity);
      }
      if (dataCode === "supply_quantity") {
        //修改数量需做4舍5入
        value = scMathUtil.roundForObj(value, getDecimal("glj.quantity"));
      }
      if (dataCode === "is_evaluate" || dataCode === "is_adjust_price" || dataCode === "is_main_material" || dataCode == "is_eval_material") {
        value = value == true ? 1 : 0;
        if (dataCode === "is_evaluate" || dataCode == "is_eval_material") {
          configMaterialObj.updateConfigMaterial(dataCode, value, recode); //暂估材料，主要材料等新需求
          return;
        }
      }
      if (dataCode === "materialType" && (value == null || value == "")) {
        //删除三材类别时，清空三材系数
        value = null;
        extend.materialCoe = null;
      }
      if (dataCode == "materialCoe") {
        value = scMathUtil.roundForObj(value, getDecimal("material"));
      }
      extend = Object.keys(extend).length > 0 ? JSON.stringify(extend) : "";
      if (recode[dataCode] == value) return;
      let updateData = { id: recode.id, field: dataCode, value: value, extend: extend };
      projectGLJ.pGljUpdate(updateData, callback);
    }
  },
  refreshProjectGljRowByID: function (ID, row) {
    //row 可以不传，如果row 和 index 相等就不刷新
    let me = this;
    let index = _.findIndex(me.projectGljSheetData, { id: ID });
    if (index >= 0 && index != row) {
      me.refreshProjectGljRow(index);
    }
  },
  getSupplyQuantity: function (supplyType, quantity) {
    // 自行采购和甲定乙供则把甲供数量设置为0，其余情况则设置为当前总消耗量
    let supplyQuantity = supplyType == 0 || supplyType == 3 ? 0 : quantity;
    supplyQuantity = parseFloat(supplyQuantity);
    return supplyQuantity;
  },
  getSupplyQuantityByGlj: function (glj) {
    //{"自行采购":0,"部分甲供":1,"完全甲供":2,"甲定乙供":3};
    let supply_quantity = glj.supply_quantity;
    switch (glj.supply) {
      case 0:
        supply_quantity = 0;
        break;
      case 1:
        break;
      case 2:
        supply_quantity = glj.quantity;
        break;
      case 3:
        supply_quantity = 0;
        break;
    }
    return supply_quantity;
  },
  checkData: function (col, setting, value) {
    return sheetCommonObj.checkData(col, setting, value);
  },
  getProjectGLJSelected: function () {
    let me = this,
      data = null;
    let sheet = me.projectGljSpread.getActiveSheet();
    if (sheet.name() == "projectGljSheet") {
      //projectGljSheet/materialSheet 工料机汇总和三材汇总表
      let sel = me.projectGljSheet.getSelections()[0];
      let srow = sel.row == -1 || sel.row == "" ? 0 : sel.row;
      if (me.projectGljSheetData.length > srow) {
        data = me.projectGljSheetData[srow];
      }
    } else if (sheet.name() == "materialTreeSheet") {
      if (this.materialTree.selected) {
        data = this.materialTree.selected.data;
      }
    }
    return data;
  },
  mutiAddCalcMaterial: function () {
    let sel = this.projectGljSheet.getSelections()[0];
    let projectGLJs = [];
    for (let i = 0; i < sel.rowCount; i++) {
      let row = sel.row + i;
      if (this.projectGljSheetData.length > row) {
        let projectGLJ = this.projectGljSheetData[row];
        if (gljUtil.isMaterialType(projectGLJ.type)) projectGLJs.push(projectGLJ);
      }
    }
    projectObj.project.projectGLJ.updateCalcMaterials(projectGLJs, 1);
  },

  initProjectGljRightClick: function () {
    //如果当前行是无组成物的“普通材料”、“绿化苗木”、“外购砼构件”、“商品混凝土”、“商品砂浆”，则右键“添加计算材料”按钮有效。
    let me = this;
    $.contextMenu({
      selector: "#project_glj_sheet",
      build: function ($trigger, e) {
        let os = me.projectGljSheet.getSelections();
        me.rightClickTarget = SheetDataHelper.safeRightClickSelection($trigger, e, me.projectGljSpread);
        let ns = me.projectGljSheet.getSelections();
        me.onProjectGljSelectionChange({}, { newSelections: ns, oldSelections: os }, true);
        return (
          me.rightClickTarget.hitTestType === GC.Spread.Sheets.SheetArea.viewport || me.rightClickTarget.hitTestType === GC.Spread.Sheets.SheetArea.rowHeader
        );
      },
      items: {
        addCalcMaterial: {
          name: "添加计算材料",
          icon: "fa-plus-square",
          disabled: function () {
            let projectGLJ = projectGljObject.getProjectGLJSelected();
            return !projectGLJ || !gljUtil.isMaterialType(projectGLJ.type);
          },
          callback: function (key, opt) {
            projectGljObject.mutiAddCalcMaterial();
            /*  console.log(me.projectGljSheet.getSelections())
                        let projectGLJ = projectGljObject.getProjectGLJSelected();
                        projectObj.project.projectGLJ.updateCalcMaterial(projectGLJ,1); */
          },
        },
        calcElectrovalence: {
          name: "计算综合电价",
          icon: "fa-calculator",
          disabled: function () {
            return false;
          },
          callback: function (key, opt) {
            $("#electrovalenceDiv").modal("show");
          },
        },
        exportPriceToExcel: {
          name: "导出Excel预算价",
          icon: "fa-reply",
          visible: function () {
            return compilationName === "四川养护(2013)" || compilationName === "部颁2018计价标准";
          },
          callback: function (key, opt) {
            me.exportToExcelFile();
          },
        },
        importPriceFromExcel: {
          name: "导入Excel预算价",
          icon: "fa-share",
          visible: function () {
            return compilationName === "四川养护(2013)" || compilationName === "部颁2018计价标准";
          },
          callback: function (key, opt) {
            $("#importPriceForm").modal("show");
          },
        },
      },
    });
  },
  initMixRatioRightClick: function () {
    let activeSheet = this.mixRatioSheet;
    let me = this;
    $.contextMenu({
      selector: "#mix_ratio_sheet",
      build: function ($trigger, e) {
        me.rightClickTarget = SheetDataHelper.safeRightClickSelection($trigger, e, me.mixRatioSpread);
        return (
          me.rightClickTarget.hitTestType === GC.Spread.Sheets.SheetArea.viewport || me.rightClickTarget.hitTestType === GC.Spread.Sheets.SheetArea.rowHeader
        );
      },
      items: {
        deleteMixRatio: {
          name: "删除",
          icon: "fa-trash-o",
          disabled: function () {
            return me.rightClickTarget.row === undefined;
          },
          callback: function (key, opt) {
            let row = me.rightClickTarget.row;
            me.deleteMixRatio(row);
          },
          visible: function (key, opt) {
            if (!$("#mixRatio-nav").hasClass("active")) return false;
            let projectGLJ = projectGljObject.getProjectGLJSelected();
            return projectGLJ && !gljUtil.isConcreteType(projectGLJ.type);
          },
        },
        addMixRatio: {
          name: "添加",
          icon: "fa-sign-in",
          disabled: function () {
            let projectGLJ = projectGljObject.getProjectGLJSelected();
            return !_.includes(compositionTypes, projectGLJ.type);
          },
          callback: function (key, opt) {
            me.selectedProjectGLJ = projectGljObject.getProjectGLJSelected();
            getGLJData("addMix");
          },
          visible: function (key, opt) {
            if (!$("#mixRatio-nav").hasClass("active")) return false;
            let projectGLJ = projectGljObject.getProjectGLJSelected();
            return projectGLJ && !gljUtil.isConcreteType(projectGLJ.type);
          },
        },
      },
    });
  },
  changeFileCallback: function () {
    projectGljObject.unitPriceFileInit();
    projectGljObject.refreshDataSheet();
    projectGljObject.initVvTax();
    materialCalcObj.showDatas();
    projectObj.project.calcProgram.calcAllNodesAndSave(calcAllType.catAll, function () {
      if (socketObject.roomInfo) {
        let data = {
          projectID: projectObj.project.ID(),
          oldRoom: socketObject.roomInfo.unitFile,
          newRoom: socketObject.getUnitFileRoomID(),
          userID: userID,
          name: "unitFile",
        };
        socket.emit("changeNewRoom", data);
        socketObject.roomInfo.unitFile = socketObject.getUnitFileRoomID();
      }
    });
    gljOprObj.refreshView();
  },
  calcPartASupplyFeeByProjectGLJs: function (projectGLJsArr) {
    for (let pGLJ of projectGLJsArr) {
      if (pGLJ.supply == supplyType.BFJG) {
        let rations = calcTools.getRationsByProjectGLJ(pGLJ.id);
        projectObj.project.calcProgram.calcNodesAndSave(rations, function () {
          projectObj.mainController.refreshTreeNode(projectObj.project.mainTree.roots);
        });
      }
    }
  },
  checkUnitFileName: function (name, callback) {
    let projectGLJ = projectObj.project.projectGLJ;
    projectGLJ.checkUnitFileName(name, function (data) {
      if (data) {
        $("#save-as-tips").text("已存在同名单价文件").show();
        $("#save-as-confirm").attr("disabled", "disabled");
      } else {
        $("#save-as-tips").hide();
        $("#save-as-confirm").removeAttr("disabled");
        if (callback) callback();
      }
    });
  },
  initFilterTypeList: function () {
    //初始化人材机汇总工料机类型过滤列表
    let htmlString = "";
    for (let t of this.displayTypeMap) {
      htmlString += '<li class="nav-item "><a class="nav-link pl-4" href="javascript:void(0)" id="' + t.ID + '">' + t.text + "</a></li>";
    }
    $("#ALL").after(htmlString);
  },
  initVvTax: async function () {
    //初始化车船税选择
    try {
      let engineeringID = projectObj.project.projectInfo.property.engineering_id;
      let result = await ajaxGet("/glj/getVvTaxList", { engineeringID: engineeringID });
      let optionString = ` <option value="">车船税标准</option>`;
      for (let r of result) {
        optionString += `<option value="${r.id}">${r.name}</option>`;
      }
      $("#vvTax").empty();
      $("#vvTax").html(optionString);
      $("#vvTax").val(projectObj.project.projectGLJ.datas.constData.vvTaxFileID ? projectObj.project.projectGLJ.datas.constData.vvTaxFileID : "");
    } catch (e) {
      console.log(e);
    }
  },
  refreshSubViews: function () {
    if ($("#mix_ratio_sheet").is(":visible") && this.mixRatioSpread) this.mixRatioSpread.refresh();
    if ($("#materialCalcSheet").is(":visible") && materialCalcObj.materialSpread) materialCalcObj.materialSpread.refresh();
    if ($("#freightSheet").is(":visible") && materialCalcObj.freightSpread) materialCalcObj.freightSpread.refresh();
    if ($("#priceSheet").is(":visible") && materialCalcObj.priceSpread) materialCalcObj.priceSpread.refresh();
    if ($("#freight_ration").is(":visible") && materialCalcObj.freightRationSpread) materialCalcObj.freightRationSpread.refresh();
    if ($("#price_ration").is(":visible") && materialCalcObj.priceRationSpread) materialCalcObj.priceRationSpread.refresh();
  },
  getColIndex: function (colName) {
    const headerArr = this.projectGljSetting.header;
    for (let index = 0; index < headerArr.length; index++) {
      const e = headerArr[index];
      if (e.headerName === colName) return index;
    }
    return -1;
  },
  getSheetDataRowAndPrice: function (gljIndex) {
    const pGlj = projectObj.project.projectGLJ.datas.gljMap[gljIndex];
    if (!pGlj) return null;
    if (pGlj.unit_price.calcMaterial === 1) return null; // 计算材料不更新预算价

    const sheetDataArr = this.projectGljSheetData;
    for (let index = 0; index < sheetDataArr.length; index++) {
      const e = sheetDataArr[index];
      if (e.id === pGlj.id) return { row: index, price: e.unit_price.market_price };
    }
    return null;
  },

  exportToExcelFile: function () {
    const excelIO = new GC.Spread.Excel.IO();
    // console.log(this.projectGljSheetData);
    let workbook = new GC.Spread.Sheets.Workbook(document.getElementById("#project_glj_sheet_Temp"));
    let sheet = workbook.sheets[0];
    workbook.commandManager().execute({ cmd: "renameSheet", sheetName: "Sheet1", name: "材料预算价" });
    sheet.getCell(0, 0).value("编号");
    sheet.getCell(0, 1).value("名称");
    sheet.getCell(0, 2).value("规格");
    sheet.getCell(0, 3).value("单位");
    sheet.getCell(0, 4).value("类型");
    sheet.getCell(0, 5).value("预算价");
    let style = new GC.Spread.Sheets.Style();
    style.font = "bold 15px Arial";
    sheet.setStyle(0, -1, style, GC.Spread.Sheets.SheetArea.viewport);

    sheet.setColumnWidth(0, 100);
    sheet.setColumnWidth(1, 200);
    sheet.setColumnWidth(2, 150);
    sheet.setColumnWidth(3, 80);
    sheet.setColumnWidth(4, 80);
    sheet.setColumnWidth(5, 90);

    sheet.getRange(-1, 0, -1, 1).hAlign(GC.Spread.Sheets.HorizontalAlign.center); // 第1列居中对齐
    sheet.getRange(-1, 3, -1, 1).hAlign(GC.Spread.Sheets.HorizontalAlign.center);
    sheet.getRange(-1, 4, -1, 1).hAlign(GC.Spread.Sheets.HorizontalAlign.center);
    sheet.getRange(-1, 5, -1, 1).hAlign(GC.Spread.Sheets.HorizontalAlign.right);
    sheet.getRange(0, -1, 1, -1).hAlign(GC.Spread.Sheets.HorizontalAlign.center); // 标题行居中对齐

    let j = 0;
    for (let i = 0; i < this.projectGljSheetData.length; i++) {
      const e = this.projectGljSheetData[i];
      if (!e.code || e.type !== 201) continue; // 过滤非材料、无编号。
      j += 1;
      sheet.getCell(j, 0).value(e.code);
      sheet.getCell(j, 1).value(e.name);
      sheet.getCell(j, 2).value(e.specs);
      sheet.getCell(j, 3).value(e.unit);
      sheet.getCell(j, 4).value(e.type);
      sheet.getCell(j, 5).value(e.unit_price.market_price);
    }

    let json = JSON.stringify(workbook.toJSON());
    excelIO.save(
      json,
      function (blob) {
        const fileName = "汇总工料机预算价.xlsx";
        saveAs(blob, fileName);
      },
      function (e) {
        if (e.errorCode === 1) {
          alert(e.errorMessage);
        }
      }
    );
  },
  readExcelFileToJson: function (excelFile) {
    projectGljObject.importJson = null;
    let excelIo = new GC.Spread.Excel.IO();
    let sDate = +new Date();
    excelIo.open(
      excelFile,
      function (json) {
        projectGljObject.importJson = json;
        console.log(`解析Excel文件时间：${+new Date() - sDate}`);
        $.bootstrapLoading.end();
      },
      function (e) {
        $.bootstrapLoading.end();
        alert(e.errorMessage);
      }
    );
  },
  readJsonSheets: function () {
    const err = "当前Excel文件格式不正确，请参考导出Excel材料预算价文件!";
    const sheet = projectGljObject.importJson.sheets["材料预算价"];
    if (!sheet) throw err;
    const sheetData = sheet.data.dataTable;
    if (!sheetData) throw err;
    const isRightHead =
      sheetData[0][0].value === "编号" &&
      sheetData[0][1].value === "名称" &&
      sheetData[0][2].value === "规格" &&
      sheetData[0][3].value === "单位" &&
      sheetData[0][4].value === "类型" &&
      sheetData[0][5].value === "预算价";
    if (!isRightHead) throw err;

    let rst = [];
    for (let row = 1; row < sheet.rows.length - 1; row++) {
      const rowData = {
        code: sheetData[row][0] ? sheetData[row][0].value : undefined,
        name: sheetData[row][1] ? sheetData[row][1].value : undefined,
        specs: sheetData[row][2] ? sheetData[row][2].value : undefined,
        unit: sheetData[row][3] ? sheetData[row][3].value : undefined,
        type: sheetData[row][4] ? sheetData[row][4].value : undefined,
        unitPrice: sheetData[row][5] ? sheetData[row][5].value : undefined,
      };
      rst.push(rowData);
    }
    return rst;
  },
  importExcelPrice: function () {
    const priceData = this.readJsonSheets();
    if (priceData.length === 0) {
      throw "当前Excel文件没有材料预算价!";
    }

    const priceCol = this.getColIndex("预算价");
    const changeInfo = [];
    for (const pd of priceData) {
      const idx = gljUtil.getIndex(pd, gljKeyArray);
      const pGljObj = this.getSheetDataRowAndPrice(idx);
      if (pGljObj && pGljObj.price !== pd.unitPrice) {
        changeInfo.push({ row: pGljObj.row, col: priceCol, value: pd.unitPrice });
      }
    }
    if (changeInfo.length > 0) this.batchUpdateProjectGLJ(changeInfo, "projectGljSheet");
  },
};

function getProjectResizeEles() {
  let pojGljResizeEles = {};
  pojGljResizeEles.eleObj = {
    module: "projectGlj",
    resize: $("#projectGljResize"),
    top: $("#projectGljTop"),
    topSpread: $("#project_glj_sheet"),
    bottom: $("#projectGljBottom"),
    bottomSpread: [$("#mix_ratio_sheet"), $("#materialCalcSheet"), $("#calcDiv")],
  };
  pojGljResizeEles.limit = {
    min: 150,
    max: `$(window).height()-$('.header').height()-$('#projectGljToolsBar').height()-150-5`, //5: resize.height()
    notTopSpread: 0,
    notBottomSpread: 0,
    bottomNav: `$('#projectGljBottom ul').height()`,
    totalHeight: `$(window).height()-$('.header').height()-$('#projectGljToolsBar').height()-5`,
  };
  return pojGljResizeEles;
}

function getConficMaterialResizeEles() {
  let conficMaterialResizeEles = {};
  conficMaterialResizeEles.eleObj = {
    module: "conficMaterial",
    resize: $("#configMaterialResize"),
    top: $("#configMaterialTop"),
    topSpread: $("#config_material_sheet"),
    bottom: $("#configMaterialBottom"),
    bottomSpread: $("#related_sheet"),
  };
  conficMaterialResizeEles.limit = {
    min: 150,
    max: `$(window).height()-$('.header').height()-$('#projectGljToolsBar').height()-150-5`, //5: resize.height()
    notTopSpread: 0,
    notBottomSpread: 0,
    totalHeight: `$(window).height()-$('.header').height()-$('#projectGljToolsBar').height()-5`,
    bottomNav: `$('#configMaterialBottom ul').height() + $('#filterToolDiv').height()+10`,
  };
  return conficMaterialResizeEles;
}

function loadProjectGljSize() {
  if ($("#project-glj-main").is(":visible")) {
    let me = projectGljObject;
    let pojGljResizeEles = getProjectResizeEles();
    SlideResize.loadVerticalHeight(pojGljResizeEles.eleObj.module, pojGljResizeEles.eleObj, pojGljResizeEles.limit, function () {
      me.projectGljSpread ? me.projectGljSpread.refresh() : "";
      materialCalcObj.initTabWidth();
      me.refreshSubViews();
    });
  } else if ($("#config_material").is(":visible")) {
    let configMaterialResizeEles = getConficMaterialResizeEles();
    SlideResize.loadVerticalHeight(configMaterialResizeEles.eleObj.module, configMaterialResizeEles.eleObj, configMaterialResizeEles.limit, function () {
      configMaterialObj.configSpread ? configMaterialObj.configSpread.refresh() : "";
      configMaterialObj.relatedSpread ? configMaterialObj.relatedSpread.refresh() : "";
      /*
          me.mixRatioSpread?me.mixRatioSpread.refresh():'';*/
    });
  }
}
//从其他建设项目中复制中，建设项目的文件层次结构名称和顺序
function getFileHierarchyInfo(treeData) {
  let tree = idTree.createNew({ id: "ID", pid: "ParentID", nid: "NextSiblingID", rootId: -1 });
  tree.loadDatas(treeData);
  let items = tree.items;
  let rst = [];
  function getFileHierarchyName(node) {
    let nodeName = node.data.name;
    let name = [];
    while (node.parent) {
      name.push(node.parent.data.name ? node.parent.data.name : "");
      node = node.parent;
    }
    name = name.reverse();
    name.push(nodeName);
    return name.join("\\");
  }
  for (let node of items) {
    if (node.children.length === 0) {
      //project
      rst.push({ ID: node.data.ID, fileHierarchyName: getFileHierarchyName(node) });
    }
  }
  return rst;
}

$(function () {
  let pojGljResizeEles = getProjectResizeEles();
  SlideResize.verticalSlide(pojGljResizeEles.eleObj, pojGljResizeEles.limit, function () {
    projectGljObject.projectGljSpread.refresh();
    projectGljObject.refreshSubViews();
  });
  let tr = getConficMaterialResizeEles();
  SlideResize.verticalSlide(tr.eleObj, tr.limit, function () {
    configMaterialObj.configSpread ? configMaterialObj.configSpread.refresh() : "";
    configMaterialObj.relatedSpread ? configMaterialObj.relatedSpread.refresh() : "";
  });
  $("#tab_project_glj").on("shown.bs.tab", function (e) {
    sessionStorage.setItem("mainTab", "#tab_project_glj");
    let me = projectGljObject;
    $(e.relatedTarget.hash).removeClass("active");
    if (me.projectGljSpread == null) {
      me.initSpreads();
    }
    me.unitPriceFileInit();
    me.initMixRatio();
    //projectObj.project.projectGLJ.calcQuantity(); 在工程量有更新的地方调用
    me.initSheetViews();
    me.refreshViewsData();
    loadProjectGljSize();
    me.initVvTax();
    materialCalcObj.initTabWidth();
    materialCalcObj.showDatas();
  });
  /*  $('#ration_link').on('shown.bs.tab', function (e) {
     let me = projectGljObject;
     me.showTag='ration';
     me.showProjectGljData();
     });
     $('#mix_ratio_link').on('shown.bs.tab', function (e) {
     let me = projectGljObject;
     me.showTag='mixRatio';
     me.showProjectGljData();
     me.initMixRatio();
     });
     $('#machine_ratio_link').on('shown.bs.tab', function (e) {
     let me = projectGljObject;
     me.showTag='machine';
     me.showProjectGljData();
     me.initMixRatio();
     });*/
  $("#pop-used-list").tooltip({
    placement: "bottom",
    html: true,
    trigger: "hover | focus",
    title: projectGljObject.getUsedTenderInfo,
  });
  // 单价文件切换弹框
  $("#change-unitFile").on("shown.bs.modal", function () {
    let rootProjectID = projectObj.project.projectInfo.property.rootProjectID;
    // 获取切换单价文件相关数据
    $.ajax({
      url: "/glj/get-project-info",
      type: "post",
      data: { project_id: scUrlUtil.GetQueryString("project"), rootProjectID: rootProjectID },
      dataType: "json",
      success: function (response) {
        if (response.err === 1) {
          alert("数据传输错误!");
          return false;
        }
        let data = response.data;
        projectGljObject.changeInfo = data;
        $("#current-project-name").text(data.currentProjectName);
        // 本项目中的单价文件
        if (data.self.length > 0) {
          let selfFileHtml = "";
          for (let tmp of data.self) {
            let select = usedUnitPriceInfo === tmp.id ? ' selected="selected"' : "";
            selfFileHtml += "<option" + select + ' value="' + tmp.id + '">' + tmp.name + "</option>";
          }
          $("#self-file").html(selfFileHtml);
        }
        // 其他建设项目数据
        let newDataOther = [];
        if (data.other.length > 0) {
          //转换成按项目管理顺序，名称包含文件夹层次
          let fileHierarchyDatas = getFileHierarchyInfo(data.treeData);
          for (let fileHierarchyData of fileHierarchyDatas) {
            let projData = _.find(data.other, { ID: fileHierarchyData.ID });
            if (projData) {
              projData.name = fileHierarchyData.fileHierarchyName;
              newDataOther.push(projData);
            }
          }
          data.other = newDataOther;
          let otherProjectHtml = "";
          let otherFileHtml = "";
          for (let tmp of data.other) {
            otherProjectHtml += '<option value="' + tmp.ID + '">' + tmp.name + "</option>";
            otherFileData[tmp.ID] = tmp.unitPriceList;
            if (otherFileHtml !== "") {
              continue;
            }
            for (let unitPrice of tmp.unitPriceList) {
              otherFileHtml += '<option value="' + unitPrice.id + '">' + unitPrice.name + "</option>";
            }
          }
          $("#other-project").html(otherProjectHtml);
          $("#other-file").html(otherFileHtml);
        }
      },
    });
  });
  // 单价文件切换确认
  $("#change-file-confirm").click(function () {
    let type = $("input[name='change-type']:checked").val();
    type = parseInt(type);
    let changeUnitPriceId = 0;
    $("#change-unitFile").modal("hide");
    if (type === 0) {
      // 从本项目中选择
      changeUnitPriceId = $("#self-file").val();
      if (!changeUnitPriceId) {
        alert("单价文件不可为空");
        return;
      }
      submitFileChange(changeUnitPriceId, type);
    } else {
      // 从其他项目中复制
      changeUnitPriceId = $("#other-file").val();
      let newName = $("#other-file").children("option:selected").text();
      projectObj.project.projectGLJ.checkUnitFileName(newName, function (need_rename) {
        if (need_rename) {
          $("#rename-unitFile").modal({ show: true });
          $("#newUnitFileID").val(changeUnitPriceId);
          $("#newUnitFileName").val(newName);
        } else {
          submitFileChange(changeUnitPriceId, type);
        }
      });
    }

    function submitFileChange(changeUnitPriceId, type) {
      let data = { project_id: scUrlUtil.GetQueryString("project"), change_id: changeUnitPriceId, type: type };
      projectObj.project.projectGLJ.changeFile(data, function () {
        projectGljObject.changeFileCallback();
      });
    }
  });
  // 单价文件选项切换
  $("input[name='change-type']").change(function () {
    let type = $(this).val();
    type = parseInt(type);
    $("#change-unitFile .option").hide();
    if (type === 0) {
      $(".option.select").show();
    } else {
      $(".option.copy").show();
    }
  });
  $("#vvTax").change(function () {
    let newVvTaxFileID = $(this).val();
    console.log(newVvTaxFileID);
    projectObj.project.projectGLJ.changeVvTaxFile(newVvTaxFileID);
  });

  $("#unitFile-save-as").on("shown.bs.modal", function () {
    // 获取当前建设项数据
    $("#save-as-name").val(projectGljObject.usedUnitPriceInfo.name + "副本");
    projectGljObject.checkUnitFileName(projectGljObject.usedUnitPriceInfo.name + "副本");
  });

  // 从其他建设项目中复制 选择建设项目
  $("#other-project").change(function () {
    let projectId = $(this).val();
    if (otherFileData[projectId] === undefined) {
      return false;
    }
    let otherFileHtml = "";
    for (let unitPrice of otherFileData[projectId]) {
      otherFileHtml += '<option value="' + unitPrice.id + '">' + unitPrice.name + "</option>";
    }
    $("#other-file").html(otherFileHtml);
  });

  $("#save-as-name").change(function () {
    projectGljObject.checkUnitFileName(this.value);
  });

  $("#newUnitFileName").change(function () {
    let projectGLJ = projectObj.project.projectGLJ;
    projectGLJ.checkUnitFileName(this.value, function (data) {
      if (data) {
        $("#renameError_unitFile").text("已存在同名单价文件").show();
        //$('#renameUnitFileConfirm').attr("disabled","disabled");
      } else {
        $("#renameError_unitFile").hide();
        // $('#renameUnitFileConfirm').removeAttr("disabled");
      }
    });
  });
  $("#renameUnitFileConfirm").click(function () {
    let projectGLJ = projectObj.project.projectGLJ;
    let newName = $("#newUnitFileName").val();
    let changeUnitPriceId = $("#newUnitFileID").val();
    projectGLJ.checkUnitFileName(newName, function (data) {
      if (data) {
        $("#renameError_unitFile").text("已存在同名单价文件").show();
        //$('#renameUnitFileConfirm').attr("disabled","disabled");
      } else {
        $("#renameError_unitFile").hide();
        $("#rename-unitFile").modal("hide");
        // $('#renameUnitFileConfirm').removeAttr("disabled");
        let data = { project_id: scUrlUtil.GetQueryString("project"), change_id: changeUnitPriceId, type: 1, newName: newName };
        projectObj.project.projectGLJ.changeFile(data, function () {
          projectGljObject.changeFileCallback();
        });
      }
    });
  });
  // 单价文件另存为操作
  $("#save-as-confirm").click(function () {
    let projectGLJ = projectObj.project.projectGLJ;
    let name = $("#save-as-name").val();
    if (name === "") {
      $("#save-as-tips").text("请填写单价文件名称").show();
      return false;
    }
    let saveData = { name: name, project_id: scUrlUtil.GetQueryString("project") };
    projectGljObject.checkUnitFileName(name, function () {
      projectGLJ.saveAs(saveData, function () {
        projectGljObject.changeFileCallback();
        $("#unitFile-save-as").modal("hide");
      });
    });
  });

  $("#filterType").on("click", "ul li a", function (e) {
    let children = $("#filterType a");
    for (let c of children) {
      $(c).removeClass("active");
    }
    $(this).addClass("active");
    let me = projectGljObject;
    me.displayType = filterType[this.id];
    me.initSheetViews();
    me.refreshViewsData();
    loadProjectGljSize();
  });

  $("#mixRatio-nav").on("shown.bs.tab", function () {
    projectGljObject.mixRatioSpread.refresh();
    projectGljObject.showMixRatioData();
  });
  $("#ration-nav").on("shown.bs.tab", function () {
    projectGljObject.mixRatioSpread.refresh();
    projectGljObject.showRelatedRationDatas();
  });

  function showAlert(msg, isHint) {
    $("#showAlert").removeClass("alert-success");
    if (isHint) $("#showAlert").addClass("alert-info");
    else $("#showAlert").addClass("alert-danger");
    $("#showAlert").text(msg);
    $("#showAlert").show();
  }

  //选择导入的excel文件
  $("#customPriceFile").change(function () {
    let file = $(this)[0];
    let excelFile = file.files[0];
    $("#showAlert").hide();
    if (excelFile) {
      let xlsReg = /xls$/g;
      if (excelFile.name && xlsReg.test(excelFile.name)) {
        showAlert(false, "请选择xlsx文件");
        $(this).val("");
        return;
      }
      $(".custom-file-label").text(`${file.files[0].name}`);
      $("#showAlert").hide();
      $.bootstrapLoading.start();
      $("#loadingPage").css("z-index", "2000");
      projectGljObject.readExcelFileToJson(excelFile);
    }
  });

  $("#importPriceBtn").click(function () {
    let me = this;
    $(me).addClass("disabled");
    try {
      $.bootstrapLoading.start();
      let file = $("#customPriceFile")[0];
      if (file.files.length <= 0) {
        throw "未选择文件";
      }
      let projectID = scUrlUtil.GetQueryString("project");
      if (!projectID || projectID <= 0) {
        throw "项目数据出错";
      }

      showAlert("正在导入预算价...", true);
      projectGljObject.importExcelPrice();
      $("#showAlert").hide();
      $(me).removeClass("disabled");
      $("#importPriceForm").modal("hide");
      if ($.bootstrapLoading.isLoading()) {
        $.bootstrapLoading.end();
      }
    } catch (err) {
      console.log(err);
      showAlert(err);
      $(me).removeClass("disabled");
      if ($.bootstrapLoading.isLoading()) {
        $.bootstrapLoading.end();
      }
    }
  });
});