YangHuCost/web/building_saas/main/js/models/calc_program.js

/**
 * Created by CSL on 2017-07-19.
 * 计算程序。所有定额、清单、父清单的计算都从此入。
 */

let calcTools = {
  getNodeByFlag: function (flag) {
    let bill = cbTools.findBill(flag);
    if (bill) return this.getNodeByID(bill.ID);
    else return null;
  },
  getNodeByID: function (ID) {
    return cbTools.getNodeByID(ID);
  },
  // 是否是标题清单
  /*isTitleBills: function (node) {
       let flag = node.getFlag();
       return titleFlags.includes(flag);
   },*/
  isBill: function (treeNode) {
    return treeNode.sourceType === ModuleNames.bills;
  },
  isParentBill: function (treeNode) {
    return (
      this.isBill(treeNode) &&
      treeNode.source.children &&
      treeNode.source.children.length > 0
    );
  },
  isLeafBill: function (treeNode) {
    // 下面挂有定额的清单也是叶子清单
    return (
      this.isBill(treeNode) &&
      treeNode.source.children &&
      treeNode.source.children.length === 0
    );
  },
  isLeafNode: function (treeNode) {
    // 最底层结点，如定额等。
    return treeNode.children.length === 0;
  },
  isBill_DXFY: function (treeNode) {
    return this.isBill(treeNode) && treeNode.data.type == billType.DXFY;
  },
  isBill_FB: function (treeNode) {
    return this.isBill(treeNode) && treeNode.data.type == billType.FB;
  },
  isBill_FX: function (treeNode) {
    return this.isBill(treeNode) && treeNode.data.type == billType.FX;
  },
  isBill_BILL: function (treeNode) {
    return this.isBill(treeNode) && treeNode.data.type == billType.BILL;
  },
  isBill_BX: function (treeNode) {
    return this.isBill(treeNode) && treeNode.data.type == billType.BX;
  },
  isNullBill: function (treeNode) {
    return (
      this.isLeafBill(treeNode) &&
      treeNode.children.length === 0 &&
      !treeNode.data.calcBase
    );
  },
  // 无效的、影响正常计算的行(无意义的空行、没有金额的行等)
  isInvalidNode: function (treeNode) {
    return !(
      treeNode.data &&
      treeNode.data.feesIndex &&
      treeNode.data.feesIndex.common &&
      treeNode.data.feesIndex.common.totalFee
    );
  },
  isCalcBaseBill: function (treeNode) {
    return (
      this.isLeafBill(treeNode) &&
      treeNode.children.length === 0 &&
      treeNode.data.calcBase
    );
  },
  isTotalCostBill: function (treeNode) {
    return (
      treeNode.data.flagsIndex &&
      treeNode.data.flagsIndex.fixed &&
      treeNode.data.flagsIndex.fixed.flag &&
      treeNode.data.flagsIndex.fixed.flag == fixedFlag.TOTAL_COST
    );
  },
  isRationCategory: function (treeNode) {
    return treeNode.sourceType === ModuleNames.ration;
  },
  isRationItem: function (treeNode) {
    return (
      this.isRationCategory(treeNode) &&
      treeNode.data.type === rationType.ration
    );
  },
  isCalcManageRation: function (treeNode) {
    return (
      this.isRationCategory(treeNode) &&
      (treeNode.data.type === rationType.ration ||
        treeNode.data.type === rationType.install ||
        treeNode.data.type === rationType.itemIncrease)
    );
  },
  isVolumePrice: function (treeNode) {
    return (
      this.isRationCategory(treeNode) &&
      treeNode.data.type === rationType.volumePrice
    );
  },
  isGljRation: function (treeNode) {
    return (
      this.isRationCategory(treeNode) &&
      treeNode.data.type === rationType.gljRation
    );
  },
  isVP_or_GLJR: function (treeNode) {
    // 是量价或工料机类型的定额
    return (
      this.isRationCategory(treeNode) &&
      (treeNode.data.type == rationType.volumePrice ||
        treeNode.data.type == rationType.gljRation)
    );
  },
  isSameTypeNode: function (node1, node2) {
    if (
      node1.parent &&
      node2.parent &&
      node1.parent === node2.parent &&
      node1.sourceType === node1.sourceType &&
      node1.data &&
      node2.data &&
      node1.data.type === node2.data.type
    ) {
      return true;
    }
    return false;
  },
  isInheritFrom: function (treeNode, flagsArr) {
    let cur = treeNode;
    while (cur.parent) {
      cur = cur.parent;
    }

    let flag = -1;
    if (
      cur.data.flagsIndex &&
      cur.data.flagsIndex.fixed &&
      cur.data.flagsIndex.fixed.flag
    )
      flag = cur.data.flagsIndex.fixed.flag;

    return flagsArr.includes(flag);
  },
  isFBFX: function (treeNode) {
    return projectObj.project.Bills.isFBFX(treeNode);
  },
  isTechMeasure: function (treeNode) {
    return projectObj.project.Bills.isTechMeasure(treeNode);
  },
  isInheritFrom: function (treeNode, flag) {
    let rst = false;
    let curNode = treeNode;
    while (curNode) {
      if (
        curNode.data &&
        curNode.data.flagsIndex &&
        curNode.data.flagsIndex.fixed &&
        curNode.data.flagsIndex.fixed.flag == flag
      ) {
        rst = true;
        break;
      }
      curNode = curNode.parent;
    }
    return rst;
  },
  getChildrenFormulaNodes: function (self, allFormulaNodesArr, parentNodes) {
    // 获取结点parentNodes下有公式的子结点
    let nodes = [];
    for (let pn of parentNodes) {
      for (let node of allFormulaNodesArr) {
        let cur = node;
        while (cur) {
          if (cur == pn && node != self) {
            nodes.push(node);
            break;
          }
          cur = cur.parent;
        }
      }
    }
    return nodes;
  },

  /* 重要说明：
   此时得到的GLJList，每条glj都有tenderQuantity = glj的quantity * 定额的quantity * glj的消耗量调整系数coe。
   与定额的tenderQuantity无关，与定额的子目工程量调整系数coe无关。例如：
   例：定额AB0003，工程量5，下含工料机“建筑综合工”，消耗量0.202。调价：人材机单价系数4，人工系数3，子目工程量系数2。
   则GLJList中的建筑综合工：quantity 1.01, tenderQuantity 3.03。marketPrice 115, tenderPrice 460。
   */
  /*getGLJList: function (treeNode, needOneBill) {
       delete treeNode.data.gljList;

       if (this.isRationCategory(treeNode)) {
           if (!calcTools.isVP_or_GLJR(treeNode)){
               treeNode.data.gljList = projectObj.project.calcProgram.getGljArrByRation(treeNode.data);
           }
       }
       else if (this.isBill(treeNode)){
           treeNode.data.gljList = projectObj.project.ration_glj.getGljArrByBill(treeNode, needOneBill);
       };
   },*/
  getGLJList: function (treeNode, needOneBill) {
    delete treeNode.data.gljList;
    if (this.isRationCategory(treeNode)) {
      if (treeNode.data.type != rationType.volumePrice) {
        treeNode.data.gljList =
          projectObj.project.calcProgram.getGljArrByRation(treeNode.data);
      }
    } else if (this.isBill(treeNode)) {
      let nodeQ = this.uiNodeQty(treeNode);
      let q = nodeQ ? nodeQ : 1;
      let rNodes = projectObj.project.Ration.getRationNodes(treeNode);
      let rations = rNodes.map(function (node) {
        return node.data;
      });
      treeNode.data.gljList =
        projectObj.project.ration_glj.getGatherGljArrByRations(
          rations,
          needOneBill,
          q
        );
    }
  },

  getLeafBills: function (treeNode) {
    let leafBills = [];

    function getBill(node) {
      if (!node) return;
      if (calcTools.isLeafBill(node)) leafBills.push(node);

      if (node.firstChild()) getBill(node.firstChild());
      if (node.nextSibling) getBill(node.nextSibling);
    }

    let fc = treeNode.firstChild();
    if (fc) getBill(fc);

    return leafBills;
  },
  forceSelect: function (treeNode, rowsCount = 1, colsCount = 2) {
    projectObj.mainController.tree.selected = treeNode;
    let idx = projectObj.project.mainTree.items.indexOf(treeNode);
    let sheet = projectObj.mainSpread.getActiveSheet();
    sheet.setSelection(idx, 0, rowsCount, colsCount);
    sheet.showRow(idx, GC.Spread.Sheets.VerticalPosition.center);
  },
  clearFees: function (treeNode) {
    if (!treeNode || !treeNode.data.feesIndex) {
      return;
    }
    let clearFeeField = [
      "unitFee",
      "totalFee",
      "tenderUnitFee",
      "tenderTotalFee",
    ];
    for (let feeField in treeNode.data.feesIndex) {
      for (let subFee of clearFeeField) {
        treeNode.data.feesIndex[feeField][subFee] = 0;
      }
    }
  },
  initFees: function (treeNode) {
    if (!treeNode.data.fees) {
      treeNode.data.fees = [];
      treeNode.data.feesIndex = {};
      treeNode.updateData.fees = []; // 在某种未知情况下，treeNode.data.fees有值，导致这句无法执行。下同
      treeNode.updateData.feesIndex = {};
      treeNode.changed = true;
    } else if (!treeNode.data.feesIndex) {
      treeNode.data.feesIndex = {};
      treeNode.updateData.feesIndex = {};
      for (let fee of treeNode.data.fees) {
        treeNode.data.feesIndex[fee.fieldName] = fee;
        treeNode.updateData.feesIndex[fee.fieldName] = fee;
      }
      treeNode.changed = true;
    }
  },
  initFeeField: function (treeNode, fieldName) {
    this.initFees(treeNode);
    if (!treeNode.data.feesIndex[fieldName]) {
      let fee = {
        fieldName: fieldName,
        unitFee: 0,
        totalFee: 0,
        tenderUnitFee: 0,
        tenderTotalFee: 0,
      };

      let newArr = treeNode.data.fees.filter(function (ele) {
        return ele.fieldName == fieldName;
      });
      if (newArr.length > 0) fee = newArr[0];
      else treeNode.data.fees.push(fee);

      treeNode.data.feesIndex[fieldName] = fee;
      treeNode.updateData.fees = treeNode.data.fees;
      treeNode.changed = true;
    }
  },
  checkFeeField: function (treeNode, feeObj) {
    if (!feeObj) return;
    if (feeObj.fieldName == "") return;

    // 初始化前，先拦截属性末定义、又要给该属性赋0的情况
    if (
      !treeNode.data.feesIndex ||
      !treeNode.data.feesIndex[feeObj.fieldName]
    ) {
      if (
        feeObj.unitFee == 0 &&
        feeObj.totalFee == 0 &&
        feeObj.tenderUnitFee == 0 &&
        feeObj.tenderTotalFee == 0
      )
        return;
    }

    this.initFeeField(treeNode, feeObj.fieldName);

    if (treeNode.data.feesIndex[feeObj.fieldName].unitFee != feeObj.unitFee) {
      treeNode.data.feesIndex[feeObj.fieldName].unitFee = feeObj.unitFee;
      treeNode.changed = true;
    }

    if (treeNode.data.feesIndex[feeObj.fieldName].totalFee != feeObj.totalFee) {
      treeNode.data.feesIndex[feeObj.fieldName].totalFee = feeObj.totalFee;
      treeNode.changed = true;
    }

    // 不知在何种情况下，tenderUnitFee、tenderTotalFee的值会变成NaN,这里提前处理一下
    if (isNaN(treeNode.data.feesIndex[feeObj.fieldName].tenderUnitFee))
      treeNode.data.feesIndex[feeObj.fieldName].tenderUnitFee = undefined;
    if (isNaN(treeNode.data.feesIndex[feeObj.fieldName].tenderTotalFee))
      treeNode.data.feesIndex[feeObj.fieldName].tenderTotalFee = undefined;

    if (
      treeNode.data.feesIndex[feeObj.fieldName].tenderUnitFee !=
      feeObj.tenderUnitFee
    ) {
      treeNode.data.feesIndex[feeObj.fieldName].tenderUnitFee =
        feeObj.tenderUnitFee;
      treeNode.changed = true;
    }

    if (
      treeNode.data.feesIndex[feeObj.fieldName].tenderTotalFee !=
      feeObj.tenderTotalFee
    ) {
      treeNode.data.feesIndex[feeObj.fieldName].tenderTotalFee =
        feeObj.tenderTotalFee;
      treeNode.changed = true;
    }
  },
  setFieldValue: function (treeNode, fieldName, value) {
    if (value == null) value = 0;
    if (fieldName.includes("feesIndex")) {
      let arr = fieldName.split(".");
      this.initFeeField(treeNode, arr[1]);
      if (treeNode.data.feesIndex[arr[1]][arr[2]] != value) {
        treeNode.data.feesIndex[arr[1]][arr[2]] = value;
        treeNode.updateData.feesIndex = treeNode.data.feesIndex;
        if (fieldName == "feesIndex.common.unitFee") {
          let fee = _.find(treeNode.updateData.fees, {
            fieldName: arr[1],
          });
          if (fee) fee[arr[2]] = value;
        }
        treeNode.changed = true;
      }
    } else {
      if (treeNode.data[fieldName] != value) {
        treeNode.updateData[fieldName] = value;
        treeNode.changed = true;
      }
    }
  },
  initSummaryFee: function (treeNode) {
    if (!treeNode.data.summaryFees) {
      treeNode.data.summaryFees = {
        totalFee: 0,
        estimateFee: 0,
        safetyFee: 0,
        chargeFee: 0,
      };
      treeNode.updateData.summaryFees = {
        totalFee: 0,
        estimateFee: 0,
        safetyFee: 0,
        chargeFee: 0,
      };
      treeNode.changed = true;
    }
  },
  hasAdjustPrice: function () {
    // 编办是否有材料的调整价发文
    if (
      projectObj.project.projSetting.glj_col &&
      projectObj.project.projSetting.glj_col.showAdjustPrice == true
    )
      return true;
    else return false;
  },
  // 参数fieldName值: 'common.totalFee'、'equipment.unitFee'
  getFee: function (treeNode, fieldName) {
    if (!treeNode) return 0;
    let ns = fieldName.split(".");
    if (ns.length != 2) return 0;
    else if (
      treeNode.data.feesIndex &&
      treeNode.data.feesIndex[ns[0]] &&
      treeNode.data.feesIndex[ns[0]][ns[1]]
    )
      return parseFloat(treeNode.data.feesIndex[ns[0]][ns[1]]);
    else return 0;
  },

  // 该方法已精简，不支持价差基数的计算。
  rationBaseFee: function (treeNode, gljTypes, priceType, isTender) {
    if (!treeNode.data.gljList) return 0;
    let me = this,
      result = 0;
    let price = 0,
      temp = 0,
      temp2 = 0;
    for (let glj of treeNode.data.gljList) {
      if (gljTypes.indexOf(glj.type) >= 0) {
        let gljQ = isTender
          ? me.uiGLJQty(glj["tenderQuantity"])
          : me.uiGLJQty(glj["quantity"]);
        let mprice = isTender ? glj["tenderPrice"] : glj["marketPrice"];
        let aprice = calcTools.hasAdjustPrice()
          ? glj["adjustPrice"]
          : glj["basePrice"];

        // if (priceType == priceTypes.ptBasePrice){ price = me.uiGLJPrice(glj["basePrice"], glj);}
        if (priceType == priceTypes.ptBasePrice) {
          price = glj["basePrice"];
        } else if (priceType == priceTypes.ptAdjustPrice) {
          price = aprice;
        } else if (priceType == priceTypes.ptMarketPrice) {
          price = mprice;
        }

        let nodeQ = isTender
          ? calcTools.uiNodeTenderQty(treeNode)
          : calcTools.uiNodeQty(treeNode);
        temp = (price * gljQ * nodeQ).toDecimal(decimalObj.process);
        result = (result + temp).toDecimal(decimalObj.process);
      }
    }
    result = result.toDecimal(decimalObj.ration.totalPrice);
    return result;
  },
  // masterTypeFilter 过滤机械机型：[]全部， [1，2]特大机械  [3，4]中小机械。  detailType 如机上人工费、机械折旧费等
  machineDetailFee: function (treeNode, gljArr, masterTypeFilter, detailType, isTender) {
    if (!gljArr) return 0;
    let result = 0;
    let nodeQ = isTender ? calcTools.uiNodeTenderQty(treeNode) : calcTools.uiNodeQty(treeNode);
    for (let glj of gljArr) {
      if (baseMachineMasterTypes.includes(glj.type)) {
        // 机型不符
        if (masterTypeFilter.length > 0 && glj.model && !masterTypeFilter.includes(glj.model))
          continue;

        let gljQ = isTender ? glj.tenderQuantity : glj.quantity;
        // 获取机械组成物(调价不深入到组成物)
        let mds = projectObj.project.composition.getCompositionByGLJ(glj);
        if (!mds) mds = [];
        let mdSum = 0;
        for (let md of mds) {
          if (md.type == detailType) {
            let q = md["consumption"] ? md["consumption"] : 0;
            let p = isTender ? md["tenderPrice"] ? md["tenderPrice"] : 0 : md["marketPrice"] ? md["marketPrice"] : 0;
            mdSum = mdSum + (q * p).toDecimal(decimalObj.glj.unitPriceHasMix);
            mdSum = mdSum.toDecimal(decimalObj.glj.unitPriceHasMix);
          }
        }
        result = (
          result + (nodeQ * gljQ * mdSum).toDecimal(decimalObj.process)
        ).toDecimal(decimalObj.process);
      }
    }
    result = result.toDecimal(decimalObj.ration.totalPrice);
    return result;
  },
  // 叶子清单、定额、总造价清单的暂估费。(父级清单是汇总子清单的暂估费，走计算程序逻辑，不在这里)
  estimateFee: function (treeNode, isBase, isTender) {
    // isBase, isTender 这两个参数用于基数计算
    let me = this,
      sumU = 0,
      sumT = 0,
      sumTU = 0,
      sumTT = 0;
    let nodeQ = me.uiNodeQty(treeNode);
    let nodeTQ = me.uiNodeTenderQty(treeNode);
    let isGather =
      projectObj.project.property.zanguCalcMode == zanguCalcType.gatherMaterial;

    // 先汇总数量，再乘市场价。如果是叶子清单，进入这里的gljList中的材料，已经是同类材料跨定额汇总过的了。
    function eTFee() {
      let rst = {
        eT: 0,
        eTT: 0,
      };
      if (!treeNode.data.gljList) return rst;

      let GLJObjs = [];
      for (let glj of treeNode.data.gljList) {
        if (!allMaterialTypes.includes(glj.type)) continue;
        if (glj.isEstimate) {
          let q = me.uiGLJQty(glj.totalQuantity).toDecimal(decimalObj.process);
          GLJObjs.push({
            code: glj.code,
            name: glj.name,
            specs: glj.specs,
            unit: glj.unit,
            type: glj.type,
            quantity: q,
            marketPrice: glj.marketPrice,
            tenderQuantity: glj.tenderQuantity,
            tenderPrice: glj.tenderPrice,
          });
        } else {
          // 组成物
          if (!compositionTypes.includes(glj.type)) continue;
          let mds = projectObj.project.composition.getCompositionByGLJ(glj);
          if (!mds) mds = [];
          for (let md of mds) {
            if (!md.isEstimate) continue;
            let isExist = false;
            // let glj_totalQ = (nodeQ * me.uiGLJQty(glj.quantity)).toDecimal(decimalObj.glj.quantity);
            let glj_totalQ = me
              .uiGLJQty(glj.totalQuantity)
              .toDecimal(decimalObj.glj.quantity);
            let glj_tender_totalQ = (
              nodeTQ * me.uiGLJQty(glj.tenderQuantity)
            ).toDecimal(decimalObj.glj.quantity);

            let mdQ = (glj_totalQ * me.uiGLJQty(md.consumption)).toDecimal(
              decimalObj.process
            );
            let mdTQ = (
              glj_tender_totalQ * me.uiGLJQty(md.consumption)
            ).toDecimal(decimalObj.process);

            for (let obj of GLJObjs) {
              if (
                gljOprObj.getIndex(md, gljKeyArray) ==
                gljOprObj.getIndex(obj, gljKeyArray)
              ) {
                isExist = true;
                obj.quantity = (obj.quantity + mdQ).toDecimal(
                  decimalObj.glj.quantity
                );
                obj.tenderQuantity = (obj.tenderQuantity + mdTQ).toDecimal(
                  decimalObj.glj.quantity
                );
                break;
              }
            }

            if (!isExist)
              GLJObjs.push({
                code: md.code,
                name: md.name,
                specs: md.specs,
                unit: md.unit,
                type: md.type,
                quantity: mdQ,
                marketPrice: md.marketPrice,
                tenderQuantity: mdTQ,
                tenderPrice: md.tenderPrice,
              });
          }
        }
      }

      for (let obj of GLJObjs) {
        let t = (
          me.uiGLJQty(obj.quantity) * me.uiGLJPrice(obj.marketPrice, obj)
        ).toDecimal(decimalObj.bills.totalPrice);
        rst.eT = (rst.eT + t).toDecimal(decimalObj.bills.totalPrice);

        let tt = (
          me.uiGLJQty(obj.tenderQuantity) * me.uiGLJPrice(obj.tenderPrice, obj)
        ).toDecimal(decimalObj.bills.totalPrice);
        rst.eTT = (rst.eTT + tt).toDecimal(decimalObj.bills.totalPrice);
      }
      return rst;
    }
    // 汇总子结点的暂估合价
    function eTFeeByChildren() {
      let rst = {
        eT: 0,
        eTT: 0,
      };
      for (let node of treeNode.children) {
        if (node.data.feesIndex && node.data.feesIndex["estimate"]) {
          rst.eT = (
            rst.eT + parseFloatPlus(node.data.feesIndex["estimate"].totalFee)
          ).toDecimal(decimalObj.process);
          rst.eTT = (
            rst.eTT +
            parseFloatPlus(node.data.feesIndex["estimate"].tenderTotalFee)
          ).toDecimal(decimalObj.process);
        }
      }
      rst.eT = rst.eT.toDecimal(decimalObj.bills.totalPrice);
      rst.eTT = rst.eTT.toDecimal(decimalObj.bills.totalPrice);
      return rst;
    }
    // 先数量乘市场价，再汇总
    function eUFee() {
      if (!treeNode.data.gljList) return 0;
      let rst = {
        eU: 0,
        eTU: 0,
      };
      for (let glj of treeNode.data.gljList) {
        if (!allMaterialTypes.includes(glj.type)) continue;
        if (glj.isEstimate) {
          rst.eU =
            rst.eU +
            (
              me.uiGLJQty(glj.quantity) * me.uiGLJPrice(glj.marketPrice, glj)
            ).toDecimal(decimalObj.process);
          rst.eU = rst.eU.toDecimal(decimalObj.process);
          // 不能直接用glj.tenderPrice，这个值不可靠。当调价界面删除单价系数后，tenderPrice没有实时计算，取得的值为0
          rst.eTU =
            rst.eTU +
            (me.uiGLJQty(glj.tenderQuantity) * glj.tenderPrice).toDecimal(
              decimalObj.process
            );
          rst.eTU = rst.eTU.toDecimal(decimalObj.process);
        } else {
          // 组成物。
          if (!compositionTypes.includes(glj.type)) continue;
          let mds = projectObj.project.composition.getCompositionByGLJ(glj);
          if (!mds) mds = [];
          for (let md of mds) {
            if (!md.isEstimate) continue;

            let mdU = (
              me.uiGLJQty(md.consumption) * me.uiGLJPrice(md.marketPrice)
            ).toDecimal(decimalObj.glj.unitPrice);
            rst.eU =
              rst.eU +
              (mdU * me.uiGLJQty(glj.quantity)).toDecimal(decimalObj.process);
            rst.eU = rst.eU.toDecimal(decimalObj.process);

            // 数量只调到工料机级别，工料机下的组成物不调量（如机械、混凝土）。调价调的是工料机下的组成物的价。
            let mdTU = (me.uiGLJQty(md.consumption) * md.tenderPrice).toDecimal(
              decimalObj.glj.unitPrice
            );
            rst.eTU =
              rst.eTU +
              (mdTU * glj.tenderQuantity).toDecimal(decimalObj.process);
            rst.eTU = rst.eTU.toDecimal(decimalObj.process);
          }
        }
      }
      rst.eU = rst.eU.toDecimal(decimalObj.bills.unitPrice);
      rst.eTU = rst.eTU.toDecimal(decimalObj.bills.unitPrice);
      return rst;
    }

    // 总造价暂估费
    if (me.isTotalCostBill(treeNode)) {
      let nodes = projectObj.project.mainTree.roots;
      for (let node of nodes) {
        if (me.isTotalCostBill(node)) break;
        let eU = 0,
          eT = 0,
          eTU = 0,
          eTT = 0;
        if (node.data.feesIndex && node.data.feesIndex.estimate) {
          eU = node.data.feesIndex.estimate.unitFee;
          eT = node.data.feesIndex.estimate.totalFee;
          eTU = node.data.feesIndex.estimate.tenderUnitFee;
          eTT = node.data.feesIndex.estimate.tenderTotalFee;
        } else {
          (eU = 0), (eT = 0), (eTU = 0), (eTT = 0);
        }
        sumU = (sumU + parseFloatPlus(eU)).toDecimal(decimalObj.process);
        sumT = (sumT + parseFloatPlus(eT)).toDecimal(decimalObj.process);
        sumTU = (sumTU + parseFloatPlus(eTU)).toDecimal(decimalObj.process);
        sumTT = (sumTT + parseFloatPlus(eTT)).toDecimal(decimalObj.process);
      }
      sumU = sumU.toDecimal(decimalObj.bills.unitPrice);
      sumT = sumT.toDecimal(decimalObj.bills.totalPrice);
      sumTU = sumTU.toDecimal(decimalObj.bills.unitPrice);
      sumTT = sumTT.toDecimal(decimalObj.bills.totalPrice);
    } else if (me.isParentBill(treeNode)) {
      // 父清单不要汇总单价。
      let eTFBC = eTFeeByChildren();
      sumT = eTFBC.eT;
      sumTT = eTFBC.eTT;
      sumU = undefined;
      sumTU = undefined;
    } else if (me.isLeafBill(treeNode)) {
      if (
        treeNode.data.specialProvisional == "专业工程" ||
        projectObj.project.Bills.isEngineerEst(treeNode)
      ) {
        if (treeNode.data.feesIndex["common"] != undefined) {
          sumT = treeNode.data.feesIndex["common"].totalFee;
          sumU = treeNode.data.feesIndex["common"].unitFee;
          sumTT = treeNode.data.feesIndex["common"].tenderTotalFee;
          sumTU = treeNode.data.feesIndex["common"].tenderUnitFee;
        }
      } else {
        if (isGather) {
          me.getGLJList(treeNode, false);
          let eTF = eTFee();
          sumT = eTF.eT;
          sumTT = eTF.eTT;
        } else {
          let eTFBC = eTFeeByChildren();
          sumT = eTFBC.eT;
          sumTT = eTFBC.eTT;
        }

        let q = nodeQ ? nodeQ : 1;
        sumU = (sumT / q).toDecimal(decimalObj.bills.totalPrice);
        let tq = nodeTQ ? nodeTQ : 1;
        sumTU = (sumTT / tq).toDecimal(decimalObj.bills.totalPrice);
      }
    } else if (me.isRationCategory(treeNode)) {
      me.getGLJList(treeNode, false);

      let eUF = eUFee();
      sumU = eUF.eU;
      sumTU = eUF.eTU;
      if (isBase) {
        if (isTender) return sumTU;
        else return sumU;
      }

      if (isGather) {
        let eTF = eTFee();
        sumT = eTF.eT;
        sumTT = eTF.eTT;
      } else {
        sumT = (nodeQ * sumU).toDecimal(decimalObj.ration.totalPrice);
        sumTT = (nodeTQ * sumTU).toDecimal(decimalObj.ration.totalPrice);
      }
    }

    me.checkFeeField(treeNode, {
      fieldName: "estimate",
      unitFee: sumU,
      totalFee: sumT,
      tenderUnitFee: sumTU,
      tenderTotalFee: sumTT,
    });
  },
  marketPriceToBase: function (treeNode, baseName, isTender) {
    if (!calcTools.isVP_or_GLJR(treeNode)) return;
    let result = 0,
      me = this;

    function isRCJZC(treeNode, baseName) {
      // 基数名称中是否包含人材机主设，且树结点类型要匹配一致
      let rst =
        (treeNode.data.subType === gljType.LABOUR &&
          baseName.includes("人工")) || // 人工费、市场人工费
        (baseMaterialTypes.includes(treeNode.data.subType) &&
          baseName.includes("材料")) ||
        // (treeNode.data.subType === gljType.GENERAL_MACHINE && (baseName.includes('机械') || baseName.includes('机具'))) ||
        (baseMachineTypes.includes(treeNode.data.subType) &&
          (baseName.includes("机械") || baseName.includes("机具"))) ||
        (treeNode.data.subType === gljType.MAIN_MATERIAL &&
          baseName.includes("主材")) ||
        (treeNode.data.subType === gljType.EQUIPMENT &&
          baseName.includes("设备"));
      return rst;
    }

    function isNeedRationPrice() {
      return baseName.includes("定额") || baseName.includes("指标")
    }

    function isMachineLabour() {
       return baseName.includes("机上人工") || baseName.includes("机械人工")
    }

    if (
      baseName.includes("甲供") ||
      baseName.includes("甲定") ||
      baseName.includes("分包")
    ) {
      result = 0;
    } else if (baseName.includes("价差")) {
      if (treeNode.data.type == rationType.gljRation) {
        if (isRCJZC(treeNode, baseName)) {
          let aprice = me.uiGLJPrice(treeNode.data.basePrice); // 量价虚拟的工料机不可能有发文，这里直接取定额价。
          let mprice = me.uiGLJPrice(treeNode.data.marketUnitFee);
          result = (mprice - aprice).toDecimal(decimalObj.ration.unitPrice);
        }
      }
    } else if (isMachineLabour()) {
      if (treeNode.data.subType === gljType.GENERAL_MACHINE) {
        let glj = {
          code: treeNode.data.code,
          name: treeNode.data.name,
          specs: treeNode.data.specs,
          unit: treeNode.data.unit,
          quantity: 1,
          tenderQuantity: 1,
          type: treeNode.data.subType, // 注意：这里要取subType
        };
        result = me.machineDetailFee(treeNode, [glj], [], gljType.MACHINE_LABOUR, isTender);
      }
    } else {
      if (isRCJZC(treeNode, baseName)) {
        let mPrice = treeNode.data.marketUnitFee ? parseFloat(treeNode.data.marketUnitFee) : 0;
        let coe = (isTender && calcTools.isTenderProjectGLJ(treeNode.data)) ? this.tenderCoe_GLJPrice() : 1;

        if (calcTools.isVolumePrice(treeNode)) {
          result = (mPrice * coe).toDecimal(decimalObj.ration.unitPrice);
        }
        else if (calcTools.isGljRation(treeNode)) {
            // 这里要取基价或市场价，但不能直接取basePrice，受限于项目属性的三个选项。
            let bPrice = gljOprObj.getBasePrice(treeNode);
            if (mPrice == 0) mPrice = bPrice;
            result = isNeedRationPrice() ? bPrice : (mPrice * coe).toDecimal(decimalObj.ration.unitPrice);
        }
      }
    }

    let nodeQ = isTender ? calcTools.uiNodeTenderQty(treeNode) : calcTools.uiNodeQty(treeNode);
    result = (result * nodeQ).toDecimal(decimalObj.ration.totalPrice);
    return result;
  },
  partASupplyFee: function (
    treeNode,
    baseName,
    isTender,
    isRationPirce = true
  ) {
    // isRationPirce 为true时表示取定额价。如：甲供定额材料费
    if (!treeNode.data.gljList) return 0;
    let projectGLJ = projectObj.project.projectGLJ;

    let supplyT = [];
    if (baseName.includes("甲供")) supplyT = [supplyType.BFJG, supplyType.WQJG];
    // 字段中存储的是汉字、数字混杂！
    else if (baseName.includes("甲定")) supplyT = [supplyType.JDYG];

    let gljT = [],
      compT = [];
    if (baseName.includes("人工")) gljT = [gljType.LABOUR];
    // 含人工的：如甲供人工、甲定人工
    else if (baseName.includes("材料")) {
      gljT = baseMaterialTypes;
      compT = compositionTypes;
    } else if (baseName.includes("机械") || baseName.includes("机具")) {
      gljT = baseMachineTypes;
      compT = [
        gljType.GENERAL_MACHINE,
        gljType.INSTRUMENT,
        gljType.OTHER_MACHINE_USED,
      ]; // 取并集，兼容重庆2018新定额
    } else if (baseName.includes("主材")) {
      gljT = [gljType.MAIN_MATERIAL];
      compT = [gljType.MAIN_MATERIAL];
    } else if (baseName.includes("设备")) {
      gljT = [gljType.EQUIPMENT];
    }
    // alert(JSON.stringify(projectGLJ.testGLJs()));
    let supplyGLJs = projectGLJ.getGLJsBySupply(supplyT, gljT);
    if (supplyGLJs.length == 0) return 0;
    let supplyGLJsIdx = {};
    for (let sglj of supplyGLJs) {
      supplyGLJsIdx[sglj.id] = sglj;
    }

    function isSupply(composition, supplies) {
      for (let supply of supplies) {
        if (
          supply.code == composition.code &&
          supply.name == composition.name &&
          supply.unit == composition.unit &&
          supply.specs == composition.specs &&
          supply.type == composition.type
        ) {
          composition.basePrice = supply.unit_price.base_price;
          composition.marketPrice = supply.unit_price.market_price;
          composition.supply = supply.supply;
          composition.supplyX = 1;
          if (composition.supply == supplyType.BFJG) {
            let Q = supply.quantity ? supply.quantity : 1;
            composition.supplyX = supply.supply_quantity / Q;
          }
          return true;
        }
      }
      return false;
    }

    let sum = 0;
    for (let glj of treeNode.data.gljList) {
      let gljQ = isTender ? glj.tenderQuantity : glj.quantity;

      let X = 1; // 部分甲供系数(默认1，即完全甲供)
      let tempSGLJ = supplyGLJsIdx[glj.projectGLJID];
      // 当前材料是甲供材料：①普通 ②商品硂等不计组成物的母体材料
      if (tempSGLJ) {
        // 处理部分甲供
        if (baseName.includes("甲供") && tempSGLJ.supply == supplyType.BFJG) {
          let Q = isTender ? tempSGLJ.tenderQuantity : tempSGLJ.quantity;
          // let Q = tempSGLJ.quantity;
          Q = Q ? Q : 1;
          X = tempSGLJ.supply_quantity / Q;
        }
        let gljP = isRationPirce
          ? glj.basePrice
          : isTender
          ? projectGLJ.getTenderMarketPrice(calcTools.getProjectGLJ(glj))
          : glj.marketPrice;
        sum = (sum + gljP * gljQ * X).toDecimal(decimalObj.process);
      } else {
        // 当前材料不是甲供材料
        // 混凝土等。组成物的母体，母体如果有组成物，则母体无法作为甲供材料，无法设置，此时要看其组成物是否是甲供材料；母体如果没有组成物，则母体有可能成为甲供材料。
        if (compT.includes(glj.type)) {
          let pGLJ = projectGLJ.getDataByID(glj.projectGLJID);
          let compositions = pGLJ.ratio_data; // 组成物明细
          if (compositions.length > 0) {
            for (let c of compositions) {
              if (isSupply(c, supplyGLJs)) {
                X = 1;
                if (baseName.includes("甲供") && c.supply == supplyType.BFJG) {
                  X = c.supplyX;
                }
                let cP = isRationPirce
                  ? c.basePrice
                  : isTender
                  ? projectGLJ.getTenderMarketPrice(calcTools.getProjectGLJ(c))
                  : c.marketPrice;
                sum = (sum + cP * c.consumption * gljQ * X).toDecimal(
                  decimalObj.process
                );
              }
            }
          }
        }
      }
    }
    sum = sum.toDecimal(decimalObj.ration.unitPrice);
    return sum;
  },
  getCalcType: function (treeNode) {
    if (this.isRationCategory(treeNode)) {
      return treeNodeCalcType.ctRationCalcProgram;
    } else if (this.isNullBill(treeNode)) {
      return treeNodeCalcType.ctNull;
    } else if (this.isLeafBill(treeNode)) {
      if (treeNode.children && treeNode.children.length > 0) {
        // 清单单价计算模式下的叶子清单：取自己的计算程序ID，找到自己的计算程序计算。(汇总清单所有定额的工料机)
         if (projectObj.project.property.billsCalcMode === leafBillGetFeeType.billsPrice)
             return treeNodeCalcType.ctBillCalcProgram;
         else return treeNodeCalcType.ctGatherRationsFees;// 前三种计算模式下的叶子清单：汇总定额的计算程序的费用类别
      } else {
        // 公式计算
        return treeNodeCalcType.ctCalcBaseValue;
      }
    } else if (this.isBill(treeNode)) {
      // 父清单：汇总子清单的费用类别
      return treeNodeCalcType.ctGatherBillsFees;
    } else {
      return treeNodeCalcType.ctRationCalcProgram;
    }
  },
  cutNodeForSave(treeNode) {
    let me = this;
    /*  subType、quantity、calcBase、programID、marketUnitFee等等字段较为特殊，它们的改变一定会触发计算并导致计算
         结果的变化，从而引发保存动作。将这些字段放在该位置跟计算结果一起保存，可减少前端跟后端的通讯频率。              */
    let data = treeNode.updateData;
    data.projectID = projectObj.project.ID();
    data.ID = treeNode.data.ID;
    //对比计算结果与原数据的值，有改变的才提交保存
    if (treeNode.temData) {
      for (let key in treeNode.data) {
        if (
          key == "feesIndex" ||
          key == "flagsIndex" ||
          key == "gljList" ||
          key == "calcTemplate"
        )
          continue; // 这两个字段不用保存到后台;
        if (treeNode.data[key] && typeof treeNode.data[key] == "object") {
          //对象类型转换成字符串比较
          if (Array.isArray(treeNode.data[key])) treeNode.data[key].sort();
          if (Array.isArray(treeNode.temData[key]))
            treeNode.temData[key].sort();
          if (
            JSON.stringify(treeNode.temData[key]) !==
            JSON.stringify(treeNode.data[key])
          ) {
            data[key] = treeNode.data[key];
          }
        } else if (treeNode.temData[key] !== treeNode.data[key]) {
          data[key] = treeNode.data[key];
        }
      }
    }
    // 定额大类
    if (me.isRationCategory(treeNode)) {
      // 这4个位置要分别找到更新的地方按新的来更新
      // data.isSubcontract = treeNode.data.isSubcontract;
      // data.evaluationProject = treeNode.data.evaluationProject;
      //定额类型的工料机做特殊处理
      if (me.isGljRation(treeNode)) {
        //   data.code = treeNode.data.code;
        //  data.projectGLJID = treeNode.data.projectGLJID;
        delete data.marketUnitFee;
      }
    }
    // 优化掉 undefined 属性
    data = JSON.parse(JSON.stringify(data));
    delete data.feesIndex;
    return data;
  },

  uiNodeQty: function (treeNode) {
    return parseFloatPlus(treeNode.data.quantity).toDecimal(
      decimalObj.decimal("quantity", treeNode)
    );
  },

  // 在项目工料机里检查该工料机是否参与调价
  isTenderProjectGLJ: function (glj) {
    let projGLJ = this.getProjectGLJ(glj);
    return !(projGLJ && projGLJ.is_adjust_price == 1);
  },
  // 取单价调价系数
  tenderCoe_GLJPrice: function () {
    let coe = 1;
    if (
      projectObj.project.property.tenderSetting &&
      projectObj.project.property.tenderSetting.gljPriceTenderCoe
    ) {
      coe = projectObj.project.property.tenderSetting.gljPriceTenderCoe;
      if (coe == "0") coe = 1; // 这里加个保护
    }
    return coe;
  },
  tenderCoe_NodeQty: function (treeNode) {
    let coe = 1;
    if (treeNode.data.rationQuantityCoe) {
      coe = treeNode.data.rationQuantityCoe;
      if (coe == "0") coe = 1; // 这里加个保护
    }
    return coe;
  },
  tenderCoe_GLJQty: function (treeNode, glj) {
    let coe = 1;
    if (!treeNode.data.quantityCoe) return coe;
    if (!calcTools.isTenderProjectGLJ(glj)) return coe;

    if (gljType.LABOUR == glj.type) {
      if (treeNode.data.quantityCoe.labour)
        coe = treeNode.data.quantityCoe.labour;
    } else if (baseMaterialTypes.indexOf(glj.type)) {
      if (treeNode.data.quantityCoe.material)
        coe = treeNode.data.quantityCoe.material;
    } else if (baseMachineTypes.indexOf(glj.type)) {
      if (treeNode.data.quantityCoe.machine)
        coe = treeNode.data.quantityCoe.machine;
    } else if (gljType.MAIN_MATERIAL == glj.type) {
      if (treeNode.data.quantityCoe.main) coe = treeNode.data.quantityCoe.main;
    } else if (gljType.EQUIPMENT == glj.type) {
      if (treeNode.data.quantityCoe.equipment)
        coe = treeNode.data.quantityCoe.equipment;
    }

    if (coe == "0") coe = 1; // 这里加个保护
    return coe;
  },

  uiNodeTenderQty: function (treeNode) {
    return this.calcNodeTenderQty(treeNode);
  },
  calcNodeTenderQty: function (treeNode) {
    if (this.isBill(treeNode))
      // 清单只有一个工程量，没有调整后工程量。
      return this.uiNodeQty(treeNode);
    else {
      let qCoe = 1;
      /* 量价、工料机类型的定额，在反向调价之调整人材机消耗量系数时，因为他们没有工料机可调，调价结果没变，影响汇总后的父结点金额。
       所以要特殊处理：此种情况下仍然要调量价的消耗量，即还是要像"子目工程量调整系数"方式那样调，但系数又不能在"子目工程量调整系数"
       中显示出来(明明是调工料机，你却调到树结点上，这比较搞笑啊)，所以可以改变tenderQuantity达到同样的效果以瞒天过海。所以在取系数时，
       无论什么系数，只要能取到就算正确。
       2020-04-05 注： 以上是老黄历。新思路是量价只作为定额调整，不作为工料机调整。两种反调模式下，统一都只调子目消耗量系数。
       为避免歧义，量价的工料机调整系数不允许输入。
       */
      // if (calcTools.isVP_or_GLJR(treeNode)){
      //     if (treeNode.data.rationQuantityCoe)
      //         qCoe = treeNode.data.rationQuantityCoe
      //     else if (treeNode.data.quantityCoe && treeNode.data.quantityCoe.labour)
      //         qCoe = treeNode.data.quantityCoe.labour;
      // }
      // else {
      if (treeNode.data.rationQuantityCoe)
        qCoe = treeNode.data.rationQuantityCoe;
      // };
      if (qCoe == "0" || qCoe == 0) qCoe = 1;
      treeNode.data.tenderQuantity = (
        this.uiNodeQty(treeNode) * qCoe
      ).toDecimal(decimalObj.decimal("quantity", treeNode));
      return treeNode.data.tenderQuantity;
    }
  },
  calcGLJTenderQty: function (treeNode, glj) {
    if (treeNode.data.quantityCoe == undefined) {
      glj.tenderQuantity = glj.quantity;
    } else {
      let coe = 1;
      if (this.isTenderProjectGLJ(glj))
        coe = this.tenderCoe_GLJQty(treeNode, glj);
      glj.tenderQuantity = (glj.quantity * coe).toDecimal(
        decimalObj.glj.quantity
      );
    }
    return glj.tenderQuantity;
  },
  calcGLJTenderPrice: function (glj) {
    let projGLJ = calcTools.getProjectGLJ(glj);
    if (projGLJ == null) {
      // 量价定额虚拟出来的工料机，在项目工料机中查不到。
      glj.tenderPrice =
        projectObj.project.projectGLJ.getTenderMarketPrice(projGLJ);
    } else {
      let pCoe = 1;
      // 先从项目工料机里检查该工料机是否参与调价
      if (projGLJ.is_adjust_price != 1) pCoe = this.tenderCoe_GLJPrice();
      glj.tenderPrice = (glj.marketPrice * pCoe).toDecimal(
        decimalObj.glj.unitPrice
      );
    }
    return glj.tenderPrice;
  },

  // 界面显示的工料机价格，包括定额价、市场价等。参数 price 传入一个普通的价格数值即可。
  uiGLJPrice: function (price, glj) {
    if (price) {
      let projGLJ = glj ? calcTools.getProjectGLJ(glj) : null;
      let d =
        projGLJ && projGLJ.ratio_data.length > 0
          ? decimalObj.glj.unitPriceHasMix
          : decimalObj.glj.unitPrice;
      return parseFloat(price).toDecimal(d);
    } else return 0;
  },
  // 界面显示的工料机数量。参数 quantity 传入一个普通的数量数值即可。
  uiGLJQty: function (quantity) {
    if (quantity)
      return scMathUtil.roundForObj(quantity, decimalObj.glj.quantity);
    //parseFloat(quantity).toDecimal(decimalObj.glj.quantity)
    else return 0;
  },
  hasTargetTotalFee: function (treeNode) {
    // targetTotalFee 有时为字符串“0”，此种情况会执行if 条件引起逻辑错误。所以这里封闭成方法直接调用。
    return (
      treeNode.data.targetTotalFee && parseFloat(treeNode.data.targetTotalFee)
    );
  },
  hasQuantity: function (treeNode) {
    return treeNode.data.quantity && parseFloat(treeNode.data.quantity);
  },

  getRationsByProjectGLJ(PGLJID) {
    let rationIDs = [];
    let RGs = projectObj.project.ration_glj.datas;
    let PGLJIDs = [];
    if (Array.isArray(PGLJID)) {
      //为了提高效率，改成支持传入数组
      PGLJIDs = PGLJID;
    } else {
      PGLJIDs = [PGLJID];
    }
    for (let rg of RGs) {
      if (PGLJIDs.indexOf(rg.projectGLJID) !== -1) {
        rationIDs.push(rg.rationID);
      }
    }

    let rationNodes = [];
    let nodes = projectObj.project.mainTree.nodes;
    for (let rID of rationIDs) {
      rationNodes.push(nodes["id_" + rID]);
    }

    // 工料机形式的定额
    let items = projectObj.project.mainTree.items;
    for (let item of items) {
      if (PGLJIDs.indexOf(item.data.projectGLJID) !== -1)
        rationNodes.push(item);
    }

    return rationNodes;
  },
  getNodesByProgramID(programID) {
    let discreteNodes = [];
    let nodes = projectObj.project.mainTree.items;
    for (let node of nodes) {
      if (node.data.programID == programID) discreteNodes.push(node);
    }
    return discreteNodes;
  },
  getProjectGLJ(glj) {
    if (glj.projectGLJID) {
      return projectObj.project.projectGLJ.getDataByID(glj.projectGLJID);
    } else return null;
  },
  labourDays(node, isTender) {
    if (!node.data.gljList) return 0;
    let rst = 0;
    calcTools.uiNodeQty(node);
    for (let glj of node.data.gljList) {
      if (glj.type == gljType.LABOUR) {
        let gljQ = isTender ? glj.tenderQuantity : glj.quantity;
        gljQ = gljQ.toDecimal(decimalObj.glj.quantity);
        rst = (rst + gljQ).toDecimal(decimalObj.process);
      }
    }
    return rst.toDecimal(decimalObj.glj.quantity);
  },
  getProjectFeatureProperty(propertyKey) {
    for (let o of projectObj.project.property.projectFeature) {
      if (o.key == propertyKey) {
        return o.value;
      }
    }
  },
  getFeeRateByNode(node) {
    let decimal = getDecimal("feeRate");
    if (node.data.feeRateID) {
      let r = projectObj.project.FeeRate.getFeeRateByID(node.data.feeRateID);
      if (r) return scMathUtil.roundForObj(r.rate, decimal);
    }
    if (node.data.feeRate || node.data.feeRate == 0)
      return scMathUtil.roundForObj(node.data.feeRate, decimal);

    return 100;
  },
  isEmptyObject(obj) {
    let arr = Object.keys(obj);
    return arr.length == 0;
  },
  // 清单价格是否大于最高限价
  unitFeeGTMaxPrice: function (node, feeField) {
    if (!this.isBill(node)) {
      return false;
    }
    const totalFee = this.getFee(node, feeField);
    const maxPrice = node.data.maxPrice;
    // 最高限价有值才对比
    if (!commonUtil.isNumber(maxPrice)) {
      return false;
    }
    return totalFee > +maxPrice;
  },
  // 清单价格是否小于最低限价
  unitFeeLTMinPrice: function (node, feeField) {
    if (!this.isBill(node)) {
      return false;
    }
    const totalFee = this.getFee(node, feeField);
    const minPrice = node.data.minPrice;
    // 最低限价有值才对比
    if (!commonUtil.isNumber(minPrice)) {
      return false;
    }
    return totalFee < +minPrice;
  },
  // 概预算项目
  isBudgetProject() {
    return projectObj.project.property.valuationType !== "ration";
  },
  // 招投标项目
  isBillProject() {
    return projectObj.project.property.valuationType == "ration";
  },

  getTenderTypeStr: function () {
    let tenderSetting = projectObj.project.property.tenderSetting;
    let ct =
      tenderSetting && tenderSetting.calcPriceOption
        ? tenderSetting.calcPriceOption
        : "priceBase_RCJ";
    if (ct == "priceBase") ct = "priceBase_RCJ"; // 兼容旧项目
    return ct;
  },
  getTenderType: function () {
    let rst;
    let sOption = calcTools.getTenderTypeStr();
    if (sOption == "coeBase") rst = tenderTypes.ttCalc;
    else if (sOption == "priceBase_RCJ") rst = tenderTypes.ttReverseGLJ;
    else if (sOption == "priceBase_ZM") rst = tenderTypes.ttReverseRation;
    return rst;
  },
  getProgramArray: function () {
    let array = [];
    for (let p of projectObj.project.calcProgram.datas.templates) {
      array.push({ name: p.name, ID: p.ID });
    }
    return array;
  },
  getCodeForBlock: function (node) {
    let code = node.data.code;
    if (calcTools.isBillProject()) {
      let tempNode = node;
      while (
        tempNode.data.code.indexOf("-") == 0 &&
        tempNode.parent != undefined
      ) {
        code = tempNode.parent.data.code + code;
        tempNode = tempNode.parent;
      }
    }
    return code;
  },
  getCodeFromBlock: function (block) {
    let code = "";
    let i = block.data.nodeName.indexOf(" ");
    if (i != -1) code = block.data.nodeName.slice(0, i);
    return code;
  },
  // 取树结点的调价系数。
  getCoe: function (node, tender) {
    if (tender == tenderTypes.ttReverseGLJ)
      return calcTools.isVP_or_GLJR(node)
        ? node.data.rationQuantityCoe
        : node.data.quantityCoe
        ? node.data.quantityCoe.labour
        : 0;
    else if (tender == tenderTypes.ttReverseRation)
      return node.data.rationQuantityCoe;
  },
};

let rationCalcBases = {
  人工费: function (node, isTender) {
    return calcTools.rationBaseFee(
      node,
      [gljType.LABOUR],
      priceTypes.ptMarketPrice,
      isTender
    );
  },
  材料费: function (node, isTender) {
    return calcTools.rationBaseFee(
      node,
      baseMaterialTypes,
      priceTypes.ptMarketPrice,
      isTender
    );
  },
  施工机械使用费: function (node, isTender) {
    return calcTools.rationBaseFee(
      node,
      [gljType.GENERAL_MACHINE],
      priceTypes.ptMarketPrice,
      isTender
    );
  },
  施工机械人工费: function (node, isTender) {
    return calcTools.machineDetailFee(
      node,
      node.data.gljList,
      [],
      gljType.MACHINE_LABOUR,
      isTender
    );
  },
  定额商品砼费: function (node, isTender) {
    return calcTools.rationBaseFee(
      node,
      [gljType.COMMERCIAL_CONCRETE, gljType.COMMERCIAL_MORTAR],
      priceTypes.ptBasePrice,
      isTender
    );
  },
  定额外购砼构件费: function (node, isTender) {
    return calcTools.rationBaseFee(
      node,
      [gljType.PURCHASE_COMPONENT],
      priceTypes.ptBasePrice,
      isTender
    );
  },
  定额绿化苗木费: function (node, isTender) {
    return calcTools.rationBaseFee(
      node,
      [gljType.GREEN_SEEDLING],
      priceTypes.ptBasePrice,
      isTender
    );
  },
  设备购置费: function (node, isTender) {
    return calcTools.rationBaseFee(
      node,
      [gljType.EQUIPMENT],
      priceTypes.ptMarketPrice,
      isTender
    );
  },
  定额人工费: function (node, isTender) {
    return calcTools.rationBaseFee(
      node,
      [gljType.LABOUR],
      priceTypes.ptBasePrice,
      isTender
    );
  },
  定额材料费: function (node, isTender) {
    return calcTools.rationBaseFee(
      node,
      baseMaterialTypes,
      priceTypes.ptBasePrice,
      isTender
    );
  },
  定额施工机械使用费: function (node, isTender) {
    return calcTools.rationBaseFee(
      node,
      [gljType.GENERAL_MACHINE],
      priceTypes.ptBasePrice,
      isTender
    );
  },
  定额设备费: function (node, isTender) {
    return calcTools.rationBaseFee(
      node,
      [gljType.EQUIPMENT],
      priceTypes.ptBasePrice,
      isTender
    );
  },

  /*
   '人工费价差': function (node, isTender) {
       return calcTools.rationBaseFee(node, [gljType.LABOUR], priceTypes.ptDiffPrice, isTender);
   },
   '材料费价差': function (node, isTender) {
       return calcTools.rationBaseFee(node, baseMaterialTypes, priceTypes.ptDiffPrice, isTender);
   },
   '机械费价差': function (node, isTender) {
       return calcTools.rationBaseFee(node, [gljType.GENERAL_MACHINE], priceTypes.ptDiffPrice, isTender);
   },
   '主材费价差': function (node, isTender) {
       return calcTools.rationBaseFee(node, [gljType.MAIN_MATERIAL], priceTypes.ptDiffPrice, isTender);
   },
   '设备费价差': function (node, isTender) {
       return calcTools.rationBaseFee(node, [gljType.EQUIPMENT], priceTypes.ptDiffPrice, isTender);
   },
   '主材费': function (node, isTender) {
       return calcTools.rationBaseFee(node, [gljType.MAIN_MATERIAL], priceTypes.ptBasePrice, isTender);
   },
   '设备费': function (node, isTender) {
       return calcTools.rationBaseFee(node, [gljType.EQUIPMENT], priceTypes.ptBasePrice, isTender);
   },
   '人工工日': function (node, isTender) {
       return calcTools.labourDays(node, isTender);
   },
   '甲供定额基价人工费': function (node, isTender) {
       return calcTools.partASupplyFee(node, '甲供定额基价人工费', isTender, true);
   },
   '甲供定额基价材料费': function (node, isTender) {
       return calcTools.partASupplyFee(node, '甲供定额基价材料费', isTender, true);
   },
   '甲供定额基价机械费': function (node, isTender) {
       return calcTools.partASupplyFee(node, '甲供定额基价机械费', isTender, true);
   },
   '甲供主材费': function (node, isTender) {
       return calcTools.partASupplyFee(node, '甲供主材费', isTender, false);
   },
   '甲供设备费': function (node, isTender) {
       return calcTools.partASupplyFee(node, '甲供设备费', isTender, false);
   },
   '甲定定额基价人工费': function (node, isTender) {
       return calcTools.partASupplyFee(node, '甲定定额基价人工费', isTender, true);
   },
   '甲定定额基价材料费': function (node, isTender) {
       return calcTools.partASupplyFee(node, '甲定定额基价材料费', isTender, true);
   },
   '甲定定额基价机械费': function (node, isTender) {
       return calcTools.partASupplyFee(node, '甲定定额基价机械费', isTender, true);
   },
   '甲定主材费': function (node, isTender) {
       return calcTools.partASupplyFee(node, '甲定主材费', isTender, false);
   },
   '甲定设备费': function (node, isTender) {
       return calcTools.partASupplyFee(node, '甲定设备费', isTender, false);
   },
   '暂估材料费': function (node, isTender) {
       return calcTools.estimateFee(node, true, isTender);
   },
   '分包定额基价人工费': function (node, isTender) {
       if (node.data.isSubcontract)
           return calcTools.rationBaseFee(node, [gljType.LABOUR], priceTypes.ptBasePrice, isTender)
       else
           return 0;
   },
   '分包定额基价材料费': function (node, isTender) {
       if (node.data.isSubcontract)
           return calcTools.rationBaseFee(node, baseMaterialTypes, priceTypes.ptBasePrice, isTender)
       else
           return 0;
   },
   '分包定额基价机械费': function (node, isTender) {
       if (node.data.isSubcontract)
           return calcTools.rationBaseFee(node, [gljType.GENERAL_MACHINE], priceTypes.ptBasePrice, isTender)
       else
           return 0;
   },
   '分包主材费': function (node, isTender) {
       if (node.data.isSubcontract)
           return calcTools.rationBaseFee(node, [gljType.MAIN_MATERIAL], priceTypes.ptBasePrice, isTender)
       else
           return 0;
   },
   '分包设备费': function (node, isTender) {
       if (node.data.isSubcontract)
           return calcTools.rationBaseFee(node, [gljType.EQUIPMENT], priceTypes.ptBasePrice, isTender)
       else
           return 0;
   },
   '分包人工工日': function (node, isTender) {
       if (node.data.isSubcontract)
           return calcTools.labourDays(node, isTender)
       else
           return 0;
   }*/
};

let analyzer = {
  error: "",
  standard: function (expr) {
    let str = expr;
    str = str.replace(/\s/g, ""); // 去空格、去中文空格
    str = str.replace(/（/g, "("); // 中文括号"（"换成英文括号"("
    str = str.replace(/）/g, ")"); // 中文括号"）"换成英文括号")"
    str = str.replace(/f/g, "F"); // f换成F
    str = str.replace(/l/g, "L"); // l换成L
    return str;
  },
  getFArr: function (expr) {
    let pattF = new RegExp(/F\d+/gi);
    let arrF = expr.match(pattF);
    return arrF ? arrF : [];
  },
  getAtIDArr: function (expr) {
    // ['@1','@2']
    let patt = new RegExp(/@\d+/gi);
    let arr = expr.match(patt);
    return arr ? arr : [];
  },
  getBaseArr: function (expr) {
    let pattBase = new RegExp(/\[[\u4E00-\u9FA5]+\]/gi);
    let arrBase = expr.match(pattBase);
    return arrBase ? arrBase : [];
  },

  getID: function (FName, template) {
    // F13 → 4
    let idx = FName.slice(1) - 1;
    let id = template.calcItems[idx] ? template.calcItems[idx].ID : null;
    return id;
  },
  getFName: function (atID, template) {
    // @3 → F7
    for (var i = 0; i < template.calcItems.length; i++) {
      if (template.calcItems[i].ID == atID.slice(1)) {
        return "F" + (i + 1);
      }
    }
    return null;
  },
  getItem: function (FName, template) {
    // F3 → calcItems[2] → {Object}
    let idx = FName.slice(1) - 1;
    return template.calcItems[idx];
  },
  isCycleCalc: function (expression, ID, template) {
    // 这里判断expression，是ID引用: @5+@6
    let atID = `@${ID}`;
    // 避免部分匹配，如：@10匹配@1
    let idx = expression.indexOf(atID);
    if (idx >= 0) {
      let nextPos = idx + atID.length;
      if (nextPos >= expression.length) return true;

      let char = expression.charAt(nextPos);
      if (!char.isNumberStr()) return true;
    }

    let atIDs = analyzer.getAtIDArr(expression);
    for (let atID of atIDs) {
      let item = template.compiledCalcItems[atID.slice(1)];
      if (analyzer.isCycleCalc(item.expression, ID, template)) return true;
    }

    return false;
  },
  isLegal: function (dispExpr, itemID, template) {
    // 检测包括：无效字符、基数是否中括号、基数是否定义、行引用、循环计算

    function testValue(expr) {
      try {
        expr = expr.replace(/\[[\u4E00-\u9FA5]+\]/gi, "0");
        expr = expr.replace(/@\d+/gi, "0");
        expr = expr.replace(/L/gi, "0");
        expr = expr.replace(/%/gi, "*0.01");
        if (expr.includes("00")) return false;

        eval(expr);
        return true;
      } catch (err) {
        return false;
      }
    }

    let me = analyzer;
    let expr = me.standard(dispExpr);
    let invalidChars = /[^0-9\u4e00-\u9fa5\+\-\*\/\(\)\.\[\]FL%]/g;
    if (invalidChars.test(expr)) {
      analyzer.error = `表达式中含有${hintBox.font("无效字符")}！`;
      // hintBox.infoBox('错误提示',`表达式中含有${hintBox.font('无效字符')}！`,1);
      return false;
    }

    let i = expr.search(/\df/gi); // 4F3
    let j = expr.search(/\d\[/gi); // 4[定额基价人工费]
    if (i > -1 || j > -1) {
      analyzer.error = `表达式中${hintBox.font("缺少运算符")}！`;
      // hintBox.infoBox('错误提示', `表达式中${hintBox.font('缺少运算符')}！`, 1);
      return false;
    }

    let pattCn = new RegExp(/[\u4E00-\u9FA5]+/gi);
    let arrCn = expr.match(pattCn);
    let pattBase = new RegExp(/\[[\u4E00-\u9FA5]+\]/gi);
    let arrBase = expr.match(pattBase);
    if (arrCn && !arrBase) {
      analyzer.error = `定额基数必须用中括号${hintBox.font("[]")}括起来！`;
      // hintBox.infoBox('错误提示', `定额基数必须用中括号${hintBox.font('[]')}括起来！`, 1);
      return false;
    }
    if (arrCn && arrBase && arrCn.length != arrBase.length) {
      for (let cn of arrCn) {
        let tempBase = `[${cn}]`;
        if (!arrBase.includes(tempBase)) {
          analyzer.error = `定额基数“${hintBox.font(
            cn
          )}”必须用中括号${hintBox.font("[]")}括起来！`;
          // hintBox.infoBox('错误提示', `定额基数“${hintBox.font(cn)}”必须用中括号${hintBox.font('[]')}括起来！`, 1);
          return false;
        }
      }
      // 这里要加一个保险。因为上面的 for 循环在“主材费 + [主材费]” 情况下有Bug
      analyzer.error = `定额基数必须用中括号${hintBox.font("[]")}括起来！`;
      // hintBox.infoBox('错误提示', `定额基数必须用中括号${hintBox.font('[]')}括起来！`, 1);
      return false;
    }
    if (arrBase) {
      for (let base of arrBase) {
        let baseName = base.slice(1, -1);
        if (!rationCalcBases[baseName]) {
          analyzer.error = `定额基数${hintBox.font(
            "[" + baseName + "]"
          )}未定义！`;
          // hintBox.infoBox('错误提示', `定额基数${hintBox.font('[' +baseName + ']')}未定义！`, 1);
          return false;
        }
      }
    }

    let arrF = me.getFArr(expr);
    for (let F of arrF) {
      let num = F.slice(1);
      if (num > template.calcItems.length) {
        let s = hintBox.font("F" + num);
        analyzer.error = `表达式中 “${hintBox.font(s)}” 行号引用错误！`;
        // hintBox.infoBox('错误提示', `表达式中 “${hintBox.font(s)}” 行号引用错误！`, 1);
        return false;
      }
    }

    let expression = me.getExpression(expr, template);
    if (me.isCycleCalc(expression, itemID, template)) {
      analyzer.error = `表达式中有${hintBox.font("循环计算")}！`;
      // hintBox.infoBox('错误提示', `表达式中有${hintBox.font('循环计算')}！`, 1);
      return false;
    }
    if (!testValue(expression)) {
      analyzer.error = `表达式中有${hintBox.font("语法错误")}！`;
      // hintBox.infoBox('错误提示', `表达式中有${hintBox.font('语法错误')}！`, 1);
      return false;
    }

    return true; // 表达式合法
  },
  refIDToLines: function (expression, template) {
    // @2、@3 → F7、F8
    let rst = expression;
    let atIDArr = analyzer.getAtIDArr(rst);
    let fArr = [];
    for (let atID of atIDArr) {
      let FN = analyzer.getFName(atID, template);
      fArr.push(FN);
    }
    for (let i = 0; i < atIDArr.length; i++) {
      let patt = new RegExp(atIDArr[i]);
      let val = fArr[i];
      rst = rst.replace(patt, val);
    }
    return rst;
  },
  refLineToIDs: function (dispExpr, template) {
    // F7、F8 → @2、@3
    let rst = analyzer.standard(dispExpr);
    let fArr = analyzer.getFArr(rst);
    let IDArr = [];
    for (let F of fArr) {
      let ID = analyzer.getID(F, template);
      IDArr.push(ID);
    }
    for (let i = 0; i < fArr.length; i++) {
      let patt = new RegExp(fArr[i]);
      let val = `@${IDArr[i]}`;
      rst = rst.replace(patt, val);
    }
    return rst;
  },
  getDispExpr: function (expression, template) {
    return analyzer.refIDToLines(expression, template);
  },
  getExpression: function (dispExpr, template) {
    return analyzer.refLineToIDs(dispExpr, template);
  },
  getDispExprUser: function (dispExpr, labourCoe) {
    // labourCoe 是 str 类型
    let rst = analyzer.standard(dispExpr);
    rst = rst.replace(/L/g, labourCoe);
    return rst;
  },
  getCompiledExpr: function (expression, labourCoe) {
    // labourCoe 是 str 类型
    let rst = expression;
    let atIDArr = analyzer.getAtIDArr(rst);
    let IDArr = atIDArr.map(function (atID) {
      return atID.slice(1);
    });
    for (var i = 0; i < atIDArr.length; i++) {
      let patt = new RegExp(atIDArr[i]);
      let val = `$CE.at(${IDArr[i]},false)`;
      rst = rst.replace(patt, val);
    }
    rst = rst.replace(/%/g, "*0.01");
    rst = rst.replace(/\[/g, "$CE.base('");
    rst = rst.replace(/\]/g, "',false)");
    rst = rst.replace(/L/g, labourCoe);
    return rst;
  },
  getCompiledTenderExpr: function (compiledExpr) {
    let rst = compiledExpr.replace(/false/g, "true");
    return rst;
  },
  getStatement: function (expression, template) {
    let rst = expression;
    let atIDArr = analyzer.getAtIDArr(rst);
    let IDArr = atIDArr.map(function (atID) {
      return atID.slice(1);
    });
    for (var i = 0; i < atIDArr.length; i++) {
      let patt = new RegExp(atIDArr[i]);
      let val = '';
      try {
        // 重庆养护2018的计算程序模板中ID=17重复，导到后面的模板覆盖前面的。此时后面的模板还没有健康的编译出来，这里调用会报错。
          // 又不能直接改，受影响的旧项目有很多（3287个），这里加个保护。
          val = projectObj.project.calcProgram.compiledTemplates[template.ID].compiledCalcItems[IDArr[i]].name;
      }
      catch (err) {
          console.log(IDArr);
      }
      rst = rst.replace(patt, val);
    }
    rst = rst.replace(/\[/g, "");
    rst = rst.replace(/\]/g, "");
    rst = rst.replace(/L/g, "人工系数");
    return rst;
  },
  calcItemMaxID: function (template) {
    let MaxID = 0;
    for (let item of template.calcItems) {
      if (item.ID > MaxID) MaxID = item.ID;
    }
    return MaxID;
  },
  calcItemIsUsed: function (template, calcItem) {
    let atID = "@" + calcItem.ID;
    for (var i = 0; i < template.calcItems.length; i++) {
      let item = template.calcItems[i];
      let atIDArr = analyzer.getAtIDArr(item.expression);
      if (atIDArr.indexOf(atID) >= 0) {
        calcItem.tempUsed = i;
        return true;
      }
    }
    return false;
  },
  refreshUsedCalcItemsStatement: function (template, calcItem) {
    let atID = "@" + calcItem.ID;
    for (var i = 0; i < template.calcItems.length; i++) {
      let item = template.calcItems[i];
      let atIDArr = analyzer.getAtIDArr(item.expression);
      if (atIDArr.indexOf(atID) >= 0) {
        item.statement = analyzer.getStatement(item.expression, template);
      }
    }
  },

  calcItemLabourCoe: function (calcItem) {
    let lc = 0;
    if (calcItem.labourCoeID)
      lc =
        projectObj.project.calcProgram.compiledLabourCoes[
          calcItem.labourCoeID
        ].coe.toString();
    return lc;
  },
  templateRefresh: function (template) {
    for (let item of template) {
      item.dispExpr = analyzer.getDispExpr(item.expression, template);
      item.dispExprUser = analyzer.getDispExprUser(
        item.dispExpr,
        me.calcItemLabourCoe(item)
      );
    }
  },
  templateMaxID: function () {
    let ts = projectObj.project.calcProgram.templates;
    let MaxID = 0;
    for (let t of ts) {
      if (t.ID > MaxID) MaxID = t.ID;
    }
    return MaxID;
  },
  templateNewName: function (name) {
    let i = 1;
    while (projectObj.project.calcProgram.compiledTemplateMaps[name + i]) {
      i++;
    }
    return name + i;
  },
  templateNameIsExist: function (name) {
    if (projectObj.project.calcProgram.compiledTemplateMaps[name]) return true;
    else return false;
  },
  templateIsUsed: function (ID) {
    let nodes = projectObj.project.mainTree.items;
    for (let node of nodes) {
      if (node.data && node.data.programID && node.data.programID == ID) {
        return true;
      }
    }
    return false;
  },
  fieldNameIsUsed: function (template, fieldName) {
    let fieldNameEn =
      projectObj.project.calcProgram.compiledFeeTypeMaps[fieldName];
    for (var i = 0; i < template.calcItems.length; i++) {
      if (template.calcItems[i].fieldName == fieldNameEn) {
        template.fieldNameTempUsed = i;
        return true;
      }
    }
    return false;
  },
};

let executeObj = {
  treeNode: null,
  template: null,
  tempCalcItem: null,

  at: function (ID, isTender) {
    let item = executeObj.template.compiledCalcItems[ID];
    let rst = isTender ? item.tenderTotalFee : item.totalFee;
    rst = parseFloat(rst);
    return rst;
  },
  base: function (baseName, isTender) {
    let me = executeObj;

    // 量价、工料机形式的定额, 要把自己的市场单价用于计算程序中的基数。
    if (calcTools.isVP_or_GLJR(me.treeNode))
      return calcTools.marketPriceToBase(me.treeNode, baseName, isTender);
    else {
      if (!rationCalcBases[baseName]) {
        hintBox.infoBox("系统提示", "定额基数“" + baseName + "”未定义，计算错误。 (模板 " + me.template.ID + "，规则 " + me.tempCalcItem.ID + ")", 1);
        return 0;
      } else return rationCalcBases[baseName](me.treeNode, isTender);
    }
  },
  HJ: function () {
    let me = this;
    let p = me.treeNode.data.calcBaseValue ? me.treeNode.data.calcBaseValue : 0;
    let q = calcTools.uiNodeQty(me.treeNode)
      ? calcTools.uiNodeQty(me.treeNode)
      : 1;
    let u = (p / q).toDecimal(decimalObj.decimal("unitPrice", me.treeNode));
    return u;
  },
};

class CalcProgram {
  constructor(project) {
    let me = this;
    me.project = project;
    me.datas = [];
    me.rationMap = null; //定额 - 工料机映射临时变量
    me.pgljMap = null;
    project.registerModule(ModuleNames.calc_program, me);
  }

  // 兼容Project框架方法
  getSourceType() {
    return ModuleNames.calc_program;
  }
  // 兼容Project框架方法
  // isInit：是否初始化，进入单位工程为true，导出接口为false，不需要存储费率临时数据
  loadData(datas, isInit) {
    this.datas = datas;
    this.compileAllTemps(isInit);
  }
  // 兼容Project框架方法
  doAfterUpdate(err, data) {
    if (!err) {
      $.bootstrapLoading.end();
    }
  }

  // 经测试，全部编译一次耗时0.003~0.004秒。耗时基本忽略不计。
  compileAllTemps(isInit = false) {
    let me = this;
    me.compiledFeeRates = {};
    me.compiledLabourCoes = {};
    me.compiledTemplates = {};
    me.compiledTemplateMaps = {};
    me.compiledTemplateNames = [];
    me.compiledFeeTypeMaps = {};
    me.compiledFeeTypeNames = [];
    me.compiledCalcBases = {};

    me.feeRates = this.project.FeeRate.datas.rates;
    me.labourCoes = this.project.labourCoe.datas.coes;
    me.feeTypes = cpFeeTypes;
    // me.calcBases = rationCalcBase;
    me.templates = this.project.calcProgram.datas.templates;

    // me.templates.push(defaultBillTemplate);
    // 先编译公用的基础数据
    me.compilePublics();
    me.compileTemplateMaps();
    for (let t of me.templates) {
      me.compileTemplate(t);
    }
  }

  compilePublics() {
    let me = this;
    for (let rate of me.feeRates) {
      me.compiledFeeRates[rate.ID] = rate;
    }

    for (let coe of me.labourCoes) {
      me.compiledLabourCoes[coe.ID] = coe;
    }

    for (let ft of me.feeTypes) {
      me.compiledFeeTypeMaps[ft.type] = ft.name;
      me.compiledFeeTypeMaps[ft.name] = ft.type; // 中文预编译，可靠性有待验证
      me.compiledFeeTypeNames.push(ft.name);
    }

    /*        for (let cb of me.calcBases) {
                 me.compiledCalcBases[cb.dispName] = cb;         // 中文预编译，可靠性有待验证
             }*/
  }
  compileTemplateMaps() {
    let me = this;

    function clearObj(obj) {
      for (let key in obj) {
        delete obj[key];
      }
    }

    clearObj(me.compiledTemplates);
    clearObj(me.compiledTemplateMaps);
    me.compiledTemplateNames.splice(0, me.compiledTemplateNames.length);

    for (let t of me.templates) {
      me.compiledTemplates[t.ID] = t;
      me.compiledTemplateMaps[t.ID] = t.name;
      me.compiledTemplateMaps[t.name] = t.ID;
      me.compiledTemplateNames.push(t.name);
    }
  }
  compileTemplate(template) {
    let me = this;
    // me.compiledTemplates[template.ID] = template;
    // me.compiledTemplateMaps[template.ID] = template.name;
    // me.compiledTemplateMaps[template.name] = template.ID;
    // me.compiledTemplateNames.push(template.name);
    template.hasCompiled = false;
    template.errs = [];

    let private_extract_ID = function (str, idx) {
      let subStr = str.slice(idx);
      let patt = new RegExp(/@\d+/);
      let atID = subStr.match(patt);
      let ID = atID ? atID[0].slice(1) : null;
      return ID;
    };
    let private_parse_ref = function (item, itemIdx) {
      let idx = item.expression.indexOf("@", 0);
      while (idx >= 0) {
        let ID = private_extract_ID(item.expression, idx);
        let len = ID ? ID.toString().length : 0;
        if (len) {
          let subItem = template.compiledCalcItems[ID];
          if (subItem) {
            if (subItem.ID !== item.ID) {
              private_parse_ref(
                subItem,
                template.compiledCalcItems[ID + "_idx"]
              );
            } else {
              template.errs.push("循环引用ID: " + ID);
            }
          } else {
            template.errs.push("找不到ID: " + ID);
            console.log("找不到ID： " + ID);
          }
        }
        idx = item.expression.indexOf("@", idx + len + 1);
      }
      if (template.compiledSeq.indexOf(itemIdx) < 0) {
        template.compiledSeq.push(itemIdx);
      }
    };
    let private_compile_items = function () {
      for (let idx of template.compiledSeq) {
        let item = template.calcItems[idx];

        let lc = analyzer.calcItemLabourCoe(item);
        // 用于界面显示。disExpr是公式模板，不允许修改：人工系数占位符被修改后变成数值，第二次无法正确替换。
        item.dispExprUser = analyzer.getDispExprUser(item.dispExpr, lc);
        if (item.expression == "HJ") item.compiledExpr = "$CE.HJ()";
        else item.compiledExpr = analyzer.getCompiledExpr(item.expression, lc);
        if ((item.statement == undefined) || (item.statement == '')) {
            item.statement = analyzer.getStatement(item.expression, template);
        }

        if (item.feeRateID) {
          let orgFeeRate = item.feeRate;
          let cfr = me.compiledFeeRates[item.feeRateID];
          item.feeRate = cfr ? cfr.rate : 100;

          // if (!orgFeeRate || (orgFeeRate && orgFeeRate != item.feeRate)){
          //     me.saveForReports.push({templatesID: template.ID, calcItem: item});
          // }
        }

        // 字段名映射
        item.displayFieldName = me.compiledFeeTypeMaps[item.fieldName];
      }
    };

    if (template && template.calcItems && template.calcItems.length > 0) {
      template.compiledSeq = [];
      template.compiledCalcItems = {};

      for (let i = 0; i < template.calcItems.length; i++) {
        let item = template.calcItems[i];
        item.dispExpr = analyzer.getDispExpr(item.expression, template);
        template.compiledCalcItems[item.ID] = item;
        template.compiledCalcItems[item.ID + "_idx"] = i;
      }

      for (let i = 0; i < template.calcItems.length; i++) {
        let item = template.calcItems[i];
        if (template.compiledSeq.indexOf(i) < 0) {
          private_parse_ref(item, i);
        }
      }

      if (template.errs.length == 0) {
        private_compile_items();
        template.hasCompiled = true;
      } else {
        console.log("errors: " + template.errs.toString());
      }
    }
  }

  // 删掉多余的费用。例如：①切换取费类别 ②从其它计算方式(有很多费)切换到公式计算方式(只需要common费)，多出来的费要删除。
  // 如果指定了保留字段，则按用户指定的来。如果没指定保留字段，则按默认的来：总造价清单只留common, estimate两个费用类别。其它公式清单只留common。
  deleteUselessFees(treeNode, fieldNameArr) {
    if (!(treeNode.data.fees && treeNode.data.fees.length > 0)) return;
    let keeps = fieldNameArr ? fieldNameArr : [];
    // 这两个默认是要保留的
    if (!keeps.includes("common")) keeps.push("common");
    if (!keeps.includes("estimate")) keeps.push("estimate");

    for (let i = 0; i < treeNode.data.fees.length; i++) {
      if (!keeps.includes(treeNode.data.fees[i].fieldName)) {
        delete treeNode.data.feesIndex[treeNode.data.fees[i].fieldName];
        treeNode.data.fees.splice(i, 1);
        treeNode.changed = true;
      }
    }
  }

  // 不能直接删除该属性，否则无法冲掉库中已存储的值。下同。
  deleteProperties(treeNode, propNamesArr) {
    for (let pn of propNamesArr) {
      if (treeNode.data[pn]) {
        treeNode.data[pn] = null;
        treeNode.changed = true;
      }
    }
  }

  // 只计算treeNode自身。changedArr: 外部传来的一个数组，专门存储发生变动的节点。
  innerCalc(treeNode, changedArr, tenderType) {
    // if (treeNode.data.lockUnitPrice == true) return;
    if (treeNode.sourceType === ModuleNames.ration_glj) return; // 仅用作树节点显示的工料机不能参与计算。

    let me = this;
    //设置定额工料机映射表
    me.setRationMap();
    me.setUpdateDataToNode(treeNode); // 先更新要计算的节点信息
    if (!treeNode.temData) treeNode.temData = _.cloneDeep(treeNode.data); // 有可能会有多次计算，只有第一次才保存原始数据，用来对于更新。

    treeNode.calcType = calcTools.getCalcType(treeNode);

    // 父清单汇总子清单的费用类别
    if (treeNode.calcType == treeNodeCalcType.ctGatherBillsFees)
      me.innerCalcBill(treeNode, 2);
    // 叶子清单汇总定额的费用类别
    else if (treeNode.calcType == treeNodeCalcType.ctGatherRationsFees)
      me.innerCalcBill(treeNode, 1);
    // 叶子清单：公式计算
    else if (treeNode.calcType == treeNodeCalcType.ctCalcBaseValue)
      me.innerCalcBillExpr(treeNode);
    // 叶子清单：手工修改单价或金额（无定额、无公式计算，什么都没有时）。
    else if (treeNode.calcType == treeNodeCalcType.ctNull)
      me.innerCalcBillCustom(treeNode);
    // 定额：计算程序
    else me.innerCalcRation(treeNode, tenderType);

    if (!calcTools.isTotalCostBill(treeNode))
      // 已在上面的分支中计算过
      calcTools.estimateFee(treeNode);
    if (treeNode.changed && !changedArr.includes(treeNode))
      changedArr.push(treeNode);
  }

  // 清单部分抽取出来，供分摊清单公用。commonCalcType：1 叶子清单汇总定额的费用类别； 2 父清单汇总子清单的费用类别。3: 分摊：叶子清单汇总定额的费用类别。
  innerCalcBill(treeNode, commonCalcType, tender = tenderTypes.ttCalc) {
    let me = this;
    treeNode.data.programID = null;
    calcTools.initFees(treeNode);

    let nodes = [];
    if (commonCalcType == 1) {
      calcTools.getGLJList(treeNode, true);
      nodes = me.project.Ration.getRationNodes(treeNode);
    } else if (commonCalcType == 2) nodes = treeNode.children;
    else if (commonCalcType == 3) nodes = treeNode.children;

    let nQ = calcTools.uiNodeQty(treeNode);
    let nTQ = calcTools.uiNodeTenderQty(treeNode);
    let bq = nQ ? nQ : 1;
    let btq = nTQ ? nTQ : 1;

    let rst = [];
    for (let ft of cpFeeTypes) {
      let ftObj = {};
      ftObj.fieldName = ft.type;
      ftObj.name = ft.name;
      let buf = 0,
        btf = 0,
        btuf = 0,
        bttf = 0;

      if (commonCalcType == 2) {
        for (let node of nodes) {
          if (node.data.feesIndex && node.data.feesIndex[ft.type]) {
            btf = (
              btf + parseFloatPlus(node.data.feesIndex[ft.type].totalFee)
            ).toDecimal(decimalObj.process);
            bttf = (
              bttf + parseFloatPlus(node.data.feesIndex[ft.type].tenderTotalFee)
            ).toDecimal(decimalObj.process);

            if (calcTools.isBudgetProject()) {
              buf = (btf / bq).toDecimal(decimalObj.process);
              btuf = (bttf / bq).toDecimal(decimalObj.process);
            } else {
              // TASK #3409 招投标：清单父项的单价=ROUND(金额/工程量，精度)。如果清单父项的工程量为空或0，则清单父项的单价为空。
              if (nQ == 0) buf = 0;
              else buf = (btf / bq).toDecimal(decimalObj.process);

              if (nTQ == 0) btuf = 0;
              else btuf = (bttf / bq).toDecimal(decimalObj.process);
            }
          }
        }
      } else if (commonCalcType == 1 || commonCalcType == 3) {
        if (treeNode.data.lockUnitPrice == true) {
          // 清单单价锁定
          if (treeNode.data.feesIndex && treeNode.data.feesIndex[ft.type]) {
            buf = parseFloatPlus(
              treeNode.data.feesIndex[ft.type].unitFee
            ).toDecimal(decimalObj.bills.unitPrice);
            btuf = parseFloatPlus(
              treeNode.data.feesIndex[ft.type].tenderUnitFee
            ).toDecimal(decimalObj.bills.unitPrice);
            btf = (bq * buf).toDecimal(decimalObj.bills.totalPrice);
            bttf = (btq * btuf).toDecimal(decimalObj.bills.totalPrice);
          }
        } else {
          let sum_rtf = 0,
            sum_rttf = 0;
          for (let node of nodes) {
            let ruf = 0,
              rtuf = 0,
              rtf = 0,
              rttf = 0;
            if (node.data.feesIndex && node.data.feesIndex[ft.type]) {
              ruf = parseFloatPlus(
                node.data.feesIndex[ft.type].unitFee
              ).toDecimal(decimalObj.bills.unitPrice);
              rtuf = parseFloatPlus(
                node.data.feesIndex[ft.type].tenderUnitFee
              ).toDecimal(decimalObj.bills.unitPrice);
              rtf = parseFloatPlus(
                node.data.feesIndex[ft.type].totalFee
              ).toDecimal(decimalObj.bills.totalPrice);
              rttf = parseFloatPlus(
                node.data.feesIndex[ft.type].tenderTotalFee
              ).toDecimal(decimalObj.bills.totalPrice);
            }

            sum_rtf = (sum_rtf + rtf).toDecimal(decimalObj.process);
            sum_rttf = (sum_rttf + rttf).toDecimal(decimalObj.process);
          }

          buf = (sum_rtf / bq).toDecimal(decimalObj.process);
          btuf = (sum_rttf / btq).toDecimal(decimalObj.process);
          btf = sum_rtf;
          bttf = sum_rttf;
        }

       /*  if (
          calcTools.isBillProject() &&
          (ft.type == "common" || ft.type == "rationCommon")
        )  */
        if (
          me.project.property.billsCalcMode == leafBillGetFeeType.rationPriceConverse &&
          (ft.type == "common" || ft.type == "rationCommon")
        ) {
          // 招投标项目, 还要反算 
          // 9-24 新需求 开放正算反算选项，按选项判断
          buf = buf.toDecimal(decimalObj.bills.unitPrice);
          btuf = btuf.toDecimal(decimalObj.bills.unitPrice);
          btf = (buf * nQ).toDecimal(decimalObj.bills.totalPrice);
          bttf = (btuf * nQ).toDecimal(decimalObj.bills.totalPrice); 
        }
      }

      ftObj.totalFee = btf.toDecimal(decimalObj.bills.totalPrice);
      ftObj.tenderTotalFee = bttf.toDecimal(decimalObj.bills.totalPrice);
      // 需求变更：BUG #2980 预算项目类型，造价书大项费用的经济指标，在有数量有金额的情况下要反算求值（等于金额/数量），工程量清单项目类型不处理。
      // if (treeNode.parent) { // 非大项费用才需要计算、显示单价
      ftObj.unitFee = buf.toDecimal(decimalObj.bills.unitPrice);
      ftObj.tenderUnitFee = btuf.toDecimal(decimalObj.bills.unitPrice);
      // }

      calcTools.checkFeeField(treeNode, ftObj);

      rst.push(ftObj);
    }
    treeNode.data.calcTemplate = {
      calcItems: rst,
    };
  }

  innerCalcBillExpr(treeNode) {
    delete treeNode.data.gljList;
    let me = this;
    me.deleteProperties(treeNode, ["programID"]);
    me.deleteUselessFees(treeNode, ["common", "rationCommon"]);

    let nQ = calcTools.uiNodeQty(treeNode);
    let nTQ = calcTools.uiNodeTenderQty(treeNode);
    let tf = treeNode.data.calcBaseValue ? treeNode.data.calcBaseValue : 0;
    let ttf = treeNode.data.tenderCalcBaseValue
      ? treeNode.data.tenderCalcBaseValue
      : 0;
    let q = nQ ? nQ : 1;
    let tq = nTQ ? nTQ : 1;
    let uf = (tf / q).toDecimal(decimalObj.bills.unitPrice);
    let tuf = (ttf / tq).toDecimal(decimalObj.bills.unitPrice);
    if (calcTools.isBillProject()) {
      tf = (uf * q).toDecimal(decimalObj.bills.totalPrice);
      ttf = (tuf * q).toDecimal(decimalObj.bills.totalPrice);
    }
    let feeItem = {
      fieldName: "common",
      totalFee: tf,
      tenderTotalFee: ttf,
    };
    if (treeNode.parent) {
      // 非大项费用才需要计算、显示单价
      feeItem.unitFee = uf;
      feeItem.tenderUnitFee = tuf;
    }
    calcTools.checkFeeField(treeNode, feeItem);
    //第一部分建安费下，使用基数计算的清单，定额建安费应=金额
    if (
      cbTools
        .getBelongFlagList(treeNode)
        .includes(fixedFlag.CONSTRUCTION_INSTALL_FEE)
    )
      calcTools.checkFeeField(treeNode, {
        fieldName: "rationCommon",
        unitFee: uf,
        totalFee: tf,
        tenderUnitFee: tuf,
        tenderTotalFee: ttf,
      });

    // 总造价清单还要做单项工程、建设项目的四大项金额汇总
    if (calcTools.isTotalCostBill(treeNode)) {
      //     // 公式叶子清单没有暂估费，但总造价清单除外。
      calcTools.estimateFee(treeNode);
      //     calcTools.initSummaryFee(treeNode);
      //     treeNode.data.summaryFees.totalFee = tf;
      //     treeNode.data.summaryFees.estimateFee = calcTools.getFee(treeNode, 'estimate.totalFee');
    }
    treeNode.data.calcTemplate = {
      calcItems: [],
    };
  }

  innerCalcBillCustom(treeNode) {
    let me = this;
    delete treeNode.data.gljList;
    me.deleteProperties(treeNode, [
      "calcBase",
      "calcBaseValue",
      "tenderCalcBaseValue",
      "programID",
    ]);
    me.deleteUselessFees(treeNode, ["common", "rationCommon"]);

    if (treeNode.data.feesIndex && treeNode.data.feesIndex.common) {
      let ftObj = {
        fieldName: "common",
      };
      let nQ = calcTools.uiNodeQty(treeNode);
      let nTQ = calcTools.uiNodeTenderQty(treeNode);
      if (treeNode.data.calcFlag == treeNodeCalcFlag.customUnitPrice) {
        // 修改了清单单价：以单价为准，算金额
        ftObj.unitFee = parseFloatPlus(treeNode.data.feesIndex.common.unitFee);
        ftObj.totalFee = (ftObj.unitFee * nQ).toDecimal(
          decimalObj.bills.totalPrice
        );
        ftObj.tenderUnitFee = ftObj.unitFee;
        ftObj.tenderTotalFee = (ftObj.tenderUnitFee * nTQ).toDecimal(
          decimalObj.bills.totalPrice
        );
      } else if (treeNode.data.calcFlag == treeNodeCalcFlag.customTotalPrice) {
        // 修改了清单金额：以金额为准，算单价。修改了清单数量也一样
        ftObj.totalFee = parseFloatPlus(
          treeNode.data.feesIndex.common.totalFee
        );
        ftObj.unitFee = nQ ? ftObj.totalFee / nQ : ftObj.totalFee; // 如果工程量为0或空，综合单价直接等于综合合价
        ftObj.unitFee = ftObj.unitFee.toDecimal(decimalObj.bills.unitPrice);
        ftObj.tenderTotalFee = ftObj.totalFee;
        ftObj.tenderUnitFee = nTQ
          ? ftObj.tenderTotalFee / nTQ
          : ftObj.tenderTotalFee;
        ftObj.tenderUnitFee = ftObj.tenderUnitFee.toDecimal(
          decimalObj.bills.unitPrice
        );
        if (calcTools.isBillProject()) {
          // 招投标项目, 还要反算
          ftObj.totalFee = (ftObj.unitFee * nQ).toDecimal(
            decimalObj.bills.totalPrice
          );
          ftObj.tenderTotalFee = (ftObj.tenderUnitFee * nTQ).toDecimal(
            decimalObj.bills.totalPrice
          );
        }
      }
      calcTools.checkFeeField(treeNode, ftObj);

      // 数量、金额时，同步定额建安费
      if (calcTools.isInheritFrom(treeNode, 1)) {
        let ftObj2 = {
          fieldName: "rationCommon",
          unitFee: ftObj.unitFee,
          totalFee: ftObj.totalFee,
          tenderUnitFee: ftObj.tenderUnitFee,
          tenderTotalFee: ftObj.tenderTotalFee,
        };
        calcTools.checkFeeField(treeNode, ftObj2);
      }
    }

    treeNode.data.calcTemplate = {
      calcItems: [],
    };
  }

  // 定额部分抽取出来，供分摊定额公用。
  innerCalcRation(treeNode, tenderType = tenderTypes.ttCalc) {
    let me = this;
    let fnArr = [];
    calcTools.getGLJList(treeNode, true);
    let nQ = calcTools.uiNodeQty(treeNode) ? calcTools.uiNodeQty(treeNode) : 1;
    let nTQ = calcTools.uiNodeTenderQty(treeNode)
      ? calcTools.uiNodeTenderQty(treeNode)
      : 1;

    if (treeNode.calcType == treeNodeCalcType.ctRationCalcProgram) {
      // 量价、工料机类型的定额要求"市场合价"
      if (calcTools.isVP_or_GLJR(treeNode)) {
        let u = treeNode.data.marketUnitFee ? treeNode.data.marketUnitFee : 0;
        let t = (u * nQ).toDecimal(decimalObj.ration.totalPrice);
        if (treeNode.data.marketTotalFee != t) {
          treeNode.data.marketTotalFee = t;
          treeNode.changed = true;
        }
      }
    }

    let template = me.compiledTemplates[treeNode.data.programID];
    treeNode.data.calcTemplate = template;

    if (treeNode && template && template.hasCompiled) {
      //2018-08-27 空行的时候，取费专业为空，template也为空，加入template非空判断
      let $CE = executeObj;
      $CE.treeNode = treeNode;
      $CE.template = template;

      calcTools.initFees(treeNode);

      for (let idx of template.compiledSeq) {
        let calcItem = template.calcItems[idx];
        $CE.tempCalcItem = calcItem;
        let feeRate = 100; // 100%
        if (calcItem.feeRate != undefined)
          feeRate = parseFloat(calcItem.feeRate).toDecimal(decimalObj.feeRate);

        let expr = calcItem.compiledExpr;
        let tf = (eval(expr) * feeRate * 0.01).toDecimal(decimalObj.process);
        calcItem.totalFee = tf.toDecimal(
          decimalObj.decimal("totalPrice", treeNode)
        );
        calcItem.unitFee = (tf / nQ).toDecimal(
          decimalObj.decimal("unitPrice", treeNode)
        );

        let tExpr = analyzer.getCompiledTenderExpr(calcItem.compiledExpr);
        let ttf = (eval(tExpr) * feeRate * 0.01).toDecimal(decimalObj.process);
        calcItem.tenderTotalFee = ttf.toDecimal(
          decimalObj.decimal("totalPrice", treeNode)
        );
        calcItem.tenderUnitFee = (ttf / nTQ).toDecimal(
          decimalObj.decimal("unitPrice", treeNode)
        );

        if (calcItem.fieldName) {
          fnArr.push(calcItem.fieldName);
          calcTools.checkFeeField(treeNode, calcItem);
        }
      }

      if (
        tenderType == tenderTypes.ttReverseRation ||
        tenderType == tenderTypes.ttReverseGLJ
      )
        this.reverseTenderCalc(treeNode, tenderType);

      me.deleteUselessFees(treeNode, fnArr);
    }
  }

  // 存储、刷新零散的多个结点。
  saveNodes(treeNodes, callback) {
    if (treeNodes.length < 1) {
      $.bootstrapLoading.end();
      this.rationMap = null;
      this.pgljMap = null;
      return;
    }

    let me = this;

    let dataArr = [];
    let updateMap = {};
    for (let node of treeNodes) {
      if (node.changed) {
        let data = calcTools.cutNodeForSave(node);
        let newData = {
          type: node.sourceType,
          data: data,
        };
        dataArr.push(newData);
        updateMap[node.data.ID] = data;
      }
    }
    if (dataArr.length < 1) {
      $.bootstrapLoading.end();
      return;
    }

    if (projectObj.project.projectInfo.lastFileVer != VERSION) {
      let data = {
        ID: projectObj.project.ID(),
        lastFileVer: VERSION,
      };
      let newData = {
        type: "project",
        data: data,
      };
      dataArr.push(newData);
    }

    $.bootstrapLoading.start();
    me.project.updateNodes(dataArr, function (data) {
      for (let node of treeNodes) {
        delete node.changed;
        delete node.temData;
        node.updateData = {};
      }
      me.rationMap = null;
      me.pgljMap = null;
      if (callback) {
        callback(data);
      }
      projectObj.mainController.refreshTreeNode(treeNodes, false, false);
      // 批量树结点计算后，计算程序早已物是人非，所以这里要重新计算一下。警告：第二个参数千万不能改成3，否则死循环！
      projectObj.project.projectInfo.lastFileVer = VERSION;
      if (activeSubSheetIsCalcProgram())
        calcProgramObj.refreshCalcProgram(
          projectObj.project.mainTree.selected,
          2
        );
      projectInfoObj.refreshTotalPriceSpan();
      $.bootstrapLoading.end();
    });
  }
  // 计算本节点及所有会被影响到的节点，如：所有父节点(默认,可选)、公式引用节点(默认,可选)。
  // 修改一个树节点，实际上要计算和保存的是一批树结点：层层父结点、被其它结点(的公式)引用的公式结点。
  calculate(treeNode, calcParents = true, calcFormulas = true, tender) {
    let me = this;
    let changedNodes = [];
    me.innerCalc(treeNode, changedNodes, tender);
    if (treeNode.changed) {
      // 计算父结点
      if (calcParents) {
        let curNode = treeNode.parent;
        while (curNode) {
          me.innerCalc(curNode, changedNodes, tender);
          curNode = curNode.parent;
        }
      }
      // 父结点算完，再计算所有的公式结点(必须先算完父结点，再算公式结点)
      if (calcFormulas) {
        me.calcFormulaNodes(changedNodes, tender);
      }
    }

    return changedNodes;
  }
  // 计算并保存一个树节点。(修改一个树节点，实际上要计算和保存的是一批树结点：层层父结点、被其它结点(的公式)引用的公式结点)
  calcAndSave(treeNode, callback, tender) {
    this.calcNodesAndSave([treeNode], callback, tender);
    /*  let changedNodes = this.calculate(treeNode, true, true, tender); 统一调用相同的方法
       this.saveNodes(changedNodes, callback);*/
  }

  /* 计算所有树结点(分3种情况)，并返回发生变动的零散的多个树结点。参数取值如下：
       calcAllType.catAll       计算所有树结点 (默认值)
       calcAllType.catBills     计算所有清单 (改变项目属性中清单取费算法时会用到)
       calcAllType.catRations   计算所有定额、工料机形式的定额、量价，因为它们都走自己的计算程序 (改变人工系数、费率值、工料机单价时会用到)
                                (calcAllType.catRations时程序中做了特殊处理，实际上是计算所有树结点！)
       调价相关参数：
       tender:                 null：不调价(普通计算)。 1: 正向调价   2：反向调价－调子目    3: 反向调价－调工料机
   */
  calcAllNodes(calcType = calcAllType.catAll, tender) {
    let me = this;
    let changedNodes = [];

    function calcNodes(nodes) {
      for (let node of nodes) {
        me.setUpdateDataToNode(node);
        if (node.children.length > 0) {
          calcNodes(node.children);
        }

        if (calcType == calcAllType.catAll || calcType == node.sourceType) {
          node.calcType = calcTools.getCalcType(node);
          if (node.calcType != treeNodeCalcType.ctCalcBaseValue)
            me.innerCalc(node, changedNodes, tender);
        }
      }
    }

    // calcAllType.catRations 参数情况不会计算父结点（因为父结点是清单），所以这里进行特殊处理。
    if (calcType == calcAllType.catRations) calcType == calcAllType.catAll;

    calcNodes(me.project.mainTree.roots);
    me.calcFormulaNodes(changedNodes, tender);

    if (tender) {
      // 清理调价缓存
      for (let node of projectObj.project.mainTree.items) {
        this.clearTenderCache(node);
      }
    }

    return changedNodes;
  }
  // tender: null：不调价(普通计算)。 1: 正向调价   2：反向调价－调子目    3: 反向调价－调工料机
  calcAllNodesAndSave(calcType = calcAllType.catAll, callback, tender) {
    let changedNodes = this.calcAllNodes(calcType, tender);
    this.saveNodes(changedNodes, callback);
  }
  setUpdateDataToNode(node) {
    //将updateData里面的值设到node.data上，计算结点时才能拿到最新的值
    if (!_.isEmpty(node.updateData)) {
      node.changed = true;
      for (let key in node.updateData) {
        node.data[key] = node.updateData[key];
      }
    }
  }

  // 计算零散的、混杂的树节点：清单、定额混合等(如：用到某一计算程序的定额和清单)。
  // 计算多条零散的定额，并计算他们所属的清单、父清单、引用清单。如：批量替换工料机后受影响的定额。
  // 计算多条零散的清单，并计算他们的父清单、引用清单。如：花选删除树结点(如花选清单、定额等，不区分树结点类型)。
  calcNodesAndSave(nodes, callback, tender) {
    let me = this,
      rationNodes = [],
      billNodes = [],
      leafBills = [],
      allChangedNodes = [];
    for (let node of nodes) {
      me.setUpdateDataToNode(node); //多节点更新的情况，要先更新值，因为计算过程中有可能要引用新的值
      if (node.sourceType == ModuleNames.ration) rationNodes.push(node);
      else billNodes.push(node);
    }

    // 多条定额同属一条叶子清单时，避免叶子清单重复计算
    for (let ration of rationNodes) {
      me.innerCalc(ration, allChangedNodes, tender);
      let leafBill = ration.parent;
      if (leafBill && leafBills.indexOf(leafBill) < 0) leafBills.push(leafBill);
    }

    billNodes.merge(leafBills);

    for (let bill of billNodes) {
      let changeBills = me.calculate(bill, true, false, tender);
      allChangedNodes.merge(changeBills);
    }

    me.calcFormulaNodes(allChangedNodes, tender);
    me.saveNodes(allChangedNodes, callback);
  }

  // 计算全部公式项。 (changedArr：将通过本方法后发生改变的节点存入changedArr中)
  calcFormulaNodes(changedArr, tender) {
    let me = this;
    let formulaNodes = cbTools.getFormulaNodes(true);
    if (formulaNodes.length == 0) return;
    for (let formulaNode of formulaNodes) {
      formulaNode.data.userCalcBase = formulaNode.data.calcBase; // 这句不该出现，projectObj.project.calcBase中要改进。
      projectObj.project.calcBase.calculate(formulaNode, true);
      if (projectObj.project.calcBase.success) {
        // 计算公式结点
        me.innerCalc(formulaNode, changedArr, tender);

        // 计算父结点
        if (formulaNode.changed) {
          let curNode = formulaNode.parent;
          while (curNode) {
            me.innerCalc(curNode, changedArr, tender);
            curNode = curNode.parent;
          }
        }
      }
    }
  }

  // 计算叶子清单下的所有子结点、自身、所有父结点、公式引用结点(即跟该叶子清单相关的所有结点)。最后打包存储。
  calcLeafAndSave(treeNode, tender) {
    let me = this;
    if (!calcTools.isLeafBill(treeNode)) return;
    if (treeNode.children && treeNode.children.length > 0) {
      let changedNodes = [];
      for (let child of treeNode.children) {
        me.innerCalc(child, changedNodes);
      }

      let curChangeds = me.calculate(treeNode, true, true, tender);
      changedNodes.merge(curChangeds);
      me.saveNodes(changedNodes);
    }
  }

  // 排除指定项的综合合价计算(用于带循环计算的情况。这里的汇总只到清单级别即可:清单单价取费时，汇总到清单和汇总到定额两个值不一样)
  getTotalFee(baseNodes, excludeNodes, feeField) {
    let rst = 0;

    function calcNodes(nodes) {
      for (let node of nodes) {
        if (!node) {
          continue;
        }
        if (!excludeNodes.includes(node)) {
          if (
            node.source &&
            node.source.children &&
            node.source.children.length > 0
          ) {
            calcNodes(node.children);
          } else {
            if (node.sourceType == ModuleNames.bills) {
              //这里不四舍五入，保证中间过程不四舍五入
              rst += calcTools.getFee(node, feeField);
            }
          }
        }
      }
    }
    calcNodes(baseNodes);
    return rst;
  }

  // 税前工程造价 ,adj调价
  getBeforeTaxTotalFee(excludeNodes, tender) {
    let baseNodes = [],
      me = this;
    baseNodes.push(calcTools.getNodeByFlag(fixedFlag.SUB_ENGINERRING));
    baseNodes.push(calcTools.getNodeByFlag(fixedFlag.MEASURE));
    // baseNodes.push(calcTools.getNodeByFlag(fixedFlag.OTHER));
    // baseNodes.push(calcTools.getNodeByFlag(fixedFlag.CHARGE));
    return me.getTotalFee(baseNodes, excludeNodes, tender);
  }

  // 清理调价缓存数据
  clearTenderCache(treeNode) {
    // 这些属性值为什么不定义在一个对象里？因为每次要判断对象是否存在，十分麻烦。不如直接写简单。分散书写，统一处理也很好用。
    if (treeNode.data.tender_activeTotal)
      delete treeNode.data.tender_activeTotal;
    if (treeNode.data.tender_activeTarget)
      delete treeNode.data.tender_activeTarget;
    if (treeNode.data.tender_fullLoad) delete treeNode.data.tender_fullLoad;
    if (treeNode.data.tender_distribute) {
      delete treeNode.data.targetTotalFee;
      delete treeNode.data.targetUnitFee;
      delete treeNode.data.tender_distribute;
    }
    if (treeNode.data.tender_diffValuePerCoe)
      delete treeNode.data.tender_diffValuePerCoe;
    if (treeNode.data.tender_rowNo) delete treeNode.data.tender_rowNo;
    if (treeNode.data.tender_previousCoe)
      delete treeNode.data.tender_previousCoe;
  }

  initGljPriceTenderCoe() {
    if (
      projectObj.project.property.tenderSetting &&
      projectObj.project.property.tenderSetting.gljPriceTenderCoe &&
      projectObj.project.property.tenderSetting.gljPriceTenderCoe != 1
    ) {
      projectObj.project.property.tenderSetting.gljPriceTenderCoe = 1; // 修改缓存值，用于计算
      projectObj.project.property.needRestoreGgljPriceTenderCoe = true; // 做个标记，告诉回调函数
    }
  }

  // 反向调价-初始化调价树、清理缓存数据等
  reverseTenderInitDatas() {
    for (let node of tender_obj.tenderTree.items) {
      if (node.data.rationQuantityCoe) node.data.rationQuantityCoe = null;
      let qcObj = node.data.quantityCoe;
      if (qcObj) {
        for (let pn in qcObj) {
          qcObj[pn] = null;
        }
      }
      this.clearTenderCache(node);
    }
    // 反向调价时人材机单价调整系数要归1：因为既可以调量又可以调价，以哪个为基准进行反调？过于复杂，仅以通用的调量逻辑为基准即可满足需求。
    this.initGljPriceTenderCoe();
  }

  // 反向调价简单计算：只计算当前单一结点，由目标金额计算定额量系数或工料机量系数coe，再根据此coe计算定额的调后量、调后合价。
  // ⑴只计算参数指定的一个单一的结点，连父结点、引用结点都不计算。此结点只会是定额、量价、工料机款定额，不会是清单。
  // ⑵执行此方法的前提：已在其它地方把总的目标金额分摊好了，此结点已获取目标金额。
  reverseTenderCalc(treeNode, tender) {
    if (tender == tenderTypes.ttReverseRation) {
      // 先初始化，使调后单价=调前单价
      if (
        treeNode.data.feesIndex.common &&
        treeNode.data.feesIndex.common.tenderUnitFee !=
          treeNode.data.feesIndex.common.unitFee
      ) {
        treeNode.data.feesIndex.common.tenderUnitFee =
          treeNode.data.feesIndex.common.unitFee;
        treeNode.changed = true;
      }
    }

    if (!treeNode.data.targetTotalFee) {
      // 没有目标金额、但有输入目标单价的：根据目标单价算出目标金额。
      if (treeNode.data.targetUnitFee) {
        treeNode.data.targetTotalFee = (
          treeNode.data.targetUnitFee * treeNode.data.quantity
        ).toDecimal(decimalObj.decimal("totalPrice", treeNode));
        treeNode.changed = true;
      } else {
        // 既没有目标金额也没有目标单价，此时要初始化使调价合价＝原始综合合价，调价单价＝原始综合单价。
        if (
          treeNode.data.feesIndex.common &&
          treeNode.data.feesIndex.common.tenderUnitFee !=
            treeNode.data.feesIndex.common.unitFee
        ) {
          treeNode.data.feesIndex.common.tenderUnitFee =
            treeNode.data.feesIndex.common.unitFee;
          treeNode.changed = true;
        }
        if (
          treeNode.data.feesIndex.common &&
          treeNode.data.feesIndex.common.tenderTotalFee !=
            treeNode.data.feesIndex.common.totalFee
        ) {
          treeNode.data.feesIndex.common.tenderTotalFee =
            treeNode.data.feesIndex.common.totalFee;
          treeNode.changed = true;
        }
        return;
      }
    }

    // 经过前面的一通折腾还是没有目标单价的话，那么就要通过目标金额算出来。
    if (
      !treeNode.data.targetUnitFee ||
      parseFloat(treeNode.data.targetUnitFee) == 0
    ) {
      if (calcTools.hasQuantity(treeNode))
        treeNode.data.targetUnitFee = (
          treeNode.data.targetTotalFee / treeNode.data.quantity
        ).toDecimal(decimalObj.decimal("unitPrice", treeNode));
    }

    // 系数=调后单价/调前单价
    let coe = 1;
    if (treeNode.data.feesIndex.common.totalFee != 0)
      coe = (
        treeNode.data.targetUnitFee / treeNode.data.feesIndex.common.unitFee
      ).toDecimal(decimalObj.process);

    // 量价、工料机款式的定额：它们无下挂工料机可调，都按定额来调，即直接调树结点的消耗量。
    let isVP_RevGLJ =
      tender == tenderTypes.ttReverseGLJ && calcTools.isVP_or_GLJR(treeNode);

    if (tender == tenderTypes.ttReverseRation || isVP_RevGLJ) {
      treeNode.data.tenderQuantity = (treeNode.data.quantity * coe).toDecimal(
        decimalObj.decimal("quantity", treeNode)
      );
      if (treeNode.data.rationQuantityCoe != coe) {
        treeNode.data.rationQuantityCoe = coe;
        treeNode.changed = true;
      }

      if (isVP_RevGLJ) {
        treeNode.data.quantityCoe = {
          labour: 0,
          material: 0,
          machine: 0,
          main: 0,
          equipment: 0,
        };
        treeNode.changed = true;
      }

      let ttf = (
        treeNode.data.tenderQuantity *
        treeNode.data.feesIndex.common.tenderUnitFee
      ).toDecimal(decimalObj.decimal("totalPrice", treeNode));
      if (treeNode.data.feesIndex.common.tenderTotalFee != ttf) {
        treeNode.data.feesIndex.common.tenderTotalFee = ttf;
        treeNode.changed = true;
      }
    } else if (tender == tenderTypes.ttReverseGLJ) {
      let qcObj = treeNode.data.quantityCoe;
      if (!qcObj || calcTools.isEmptyObject(qcObj)) {
        treeNode.data.quantityCoe = {
          labour: coe,
          material: coe,
          machine: coe,
          main: coe,
          equipment: coe,
        };
        treeNode.changed = true;
      } else {
        // 这种写法会漏掉属性，导致界面显示不统一。
        /* for (let pn in qcObj){ if (qcObj[pn] != coe){ qcObj[pn] = coe; treeNode.changed = true; } };*/
        if (qcObj.labour != coe) {
          qcObj.labour = coe;
          treeNode.changed = true;
        }
        if (qcObj.material != coe) {
          qcObj.material = coe;
          treeNode.changed = true;
        }
        if (qcObj.machine != coe) {
          qcObj.machine = coe;
          treeNode.changed = true;
        }
        if (qcObj.main != coe) {
          qcObj.main = coe;
          treeNode.changed = true;
        }
        if (qcObj.equipment != coe) {
          qcObj.equipment = coe;
          treeNode.changed = true;
        }
      }
      projectObj.project.calcProgram.calculate(
        treeNode,
        false,
        false,
        tenderTypes.ttCalc
      ); // 再正向算
    }
  }

  // 反向调价-分摊前的准备工作。包括：
  // ⑴结点是否满载
  // ⑵若是满载，汇总孩子的金额、目标金额给它
  // ⑶标记此结点的目标金额来自孩子，未来它不往下分摊（汇上来再摊下去无用功）
  prepareForDistribute(treeNode) {
    if (!treeNode) return;

    if (treeNode.firstChild()) this.prepareForDistribute(treeNode.firstChild());

    if (treeNode.children.length == 0) {
      //
    } else {
      let full = true;
      for (let i = 0; i < treeNode.children.length; i++) {
        let child = treeNode.children[i];
        if (
          !child.data.tender_fullLoad &&
          !calcTools.hasTargetTotalFee(child)
        ) {
          full = false;
          break;
        }
      }
      if (full) {
        let total = 0,
          target = 0;
        for (let i = 0; i < treeNode.children.length; i++) {
          let child = treeNode.children[i];
          total = total + parseFloat(child.data.feesIndex["common"].totalFee);
          target = target + parseFloat(child.data.targetTotalFee);
        }
        treeNode.data.tender_activeTotal = total;
        treeNode.data.tender_activeTarget = target;
        treeNode.data.targetTotalFee = target;
        treeNode.data.tender_distribute = 2;
      }

      treeNode.data.tender_fullLoad = full;
    }

    if (treeNode.nextSibling) this.prepareForDistribute(treeNode.nextSibling);
  }

  // 反向调价-分摊目标合价：从父到子往下分摊。
  distributeTargetTotalFee(treeNode) {
    if (!treeNode) return;

    if (treeNode.data.feesIndex && treeNode.data.feesIndex["common"]) {
      // 空清单忽略
      // 默认能够执行到这里时每个节点已经被初始化，缓存已删除
      treeNode.data.tender_activeTotal =
        treeNode.data.feesIndex["common"].totalFee;

      // 开始分摊：只分摊自有目标金额、从父结点分摊到的金额（不分摊子结点汇总上来的金额）
      if (
        calcTools.hasTargetTotalFee(treeNode) &&
        !(
          treeNode.data.tender_distribute &&
          treeNode.data.tender_distribute == 2
        )
      ) {
        treeNode.data.tender_activeTarget = treeNode.data.targetTotalFee;

        // 先把会破坏金额比例关系的孩子排除：1.有目标金额的 2.满载的(孙子全满，没有分摊空间，所以实质上该孩子的金额已被锁死无法分摊)
        for (let i = 0; i < treeNode.children.length; i++) {
          let child = treeNode.children[i];
          if (!child.data.feesIndex || !child.data.feesIndex["common"])
            continue; // 空白行清单、定额

          child.data.tender_activeTotal =
            child.data.feesIndex["common"].totalFee;

          if (calcTools.hasTargetTotalFee(child)) {
            child.data.tender_activeTarget = child.data.targetTotalFee;
            console.log(treeNode.data.tender_activeTotal);
            console.log(child.data.tender_activeTotal);
            treeNode.data.tender_activeTotal =
              treeNode.data.tender_activeTotal - child.data.tender_activeTotal;
            treeNode.data.tender_activeTarget =
              treeNode.data.tender_activeTarget -
              child.data.tender_activeTarget;
          }
        }

        if (treeNode.data.tender_activeTotal != 0) {
          let coe = (
            treeNode.data.tender_activeTarget / treeNode.data.tender_activeTotal
          ).toDecimal(decimalObj.process);

          for (let i = 0; i < treeNode.children.length; i++) {
            let child = treeNode.children[i];
            if (!child.data.feesIndex || !child.data.feesIndex["common"])
              continue; // 空白行清单、定额
            if (!calcTools.hasTargetTotalFee(child)) {
              child.data.tender_activeTarget = (
                coe * child.data.tender_activeTotal
              ).toDecimal(decimalObj.decimal("totalPrice", treeNode));
              child.data.targetTotalFee = child.data.tender_activeTarget;
              child.data.tender_distribute = 1; // 1表示分摊金额来自父结点。2表示分摊金额来自孩子结点。
            }
          }
        }
      }
    }

    if (treeNode.firstChild())
      this.distributeTargetTotalFee(treeNode.firstChild());

    if (treeNode.nextSibling)
      this.distributeTargetTotalFee(treeNode.nextSibling);
  }

  // 反向调价逼近
  reverseTenderApproach(callback, tender) {
    let me = this;
    function root0() {
      return tender_obj.tenderTree.roots[0];
    }

    if (!root0().data.targetTotalFee) return; // 根结点没有指定目标金额时，逼近会带来莫名其妙的结果

    let G_DIGIT = 0.01; // 系数调整步距（0.1最终结果误差大。0.001目标金额与逼前金额差距大时无法有效逼近）
    let times = 300; // 逼近计算的极限次数。正常情况下“单位系数金额”列表中的结点耗尽即退出，这里指定轮数是最后保险阀，防止无限死循环。
    let calcModel = 1; // 计算模式：1 精度优先（差值不接近0不停，直到结点用完或极限次数用完。时间长精度高）2 速度优先（达到指定差值范围即熔断逼近。时间短差值大）
    let diffProp = 0.0001; // 计算模式=2（速度优先）时有效。 计算可接受的差值D。差值D = 根结点金额 * diffProp
    let isTest = true; // 测试

    // 按指定的比例获取可接受的差值：如目标金额的万分之一。
    function getPropV(node) {
      let v = parseFloat((node.data.targetTotalFee * diffProp).toFixed(0)); // node.data.feesIndex.common.totalFee
      return Math.max(v, 1);
    }

    // 取根结点的：调后金额跟目标金额差值，看还有多少误差需要处理。
    function getRootDiff() {
      return (
        root0().data.feesIndex.common.tenderTotalFee -
        root0().data.targetTotalFee
      ).toDecimal(3);
    }

    // 生成每单位差值的定额结点列表。
    function getNodeDiffs() {
      let arr = [];
      for (let i = 0; i < tender_obj.tenderTree.items.length; i++) {
        let node = tender_obj.tenderTree.items[i];
        if (calcTools.isInvalidNode(node)) continue;
        // 量价还是要参与，因为它贡献了金额，如果它的金额比重很大，它退出了，会导致其它结点过调。
        // if (calcTools.isRationCategory(node) && (!calcTools.isVP_or_GLJR(node))){
        if (calcTools.isRationCategory(node)) {
          let coe = calcTools.getCoe(node, tender);
          if (coe != 0) {
            let diff = Math.abs(
              node.data.feesIndex.common.tenderTotalFee -
                node.data.feesIndex.common.totalFee
            );
            node.data.tender_diffValuePerCoe = (
              (diff * G_DIGIT) /
              coe
            ).toDecimal(decimalObj.process);
            node.data.tender_rowNo = i + 1; // node在UI上显示的行号
            arr.push(node);
          }
        }
      }
      arr.sort(function sortArr(a, b) {
        return a.data.tender_diffValuePerCoe - b.data.tender_diffValuePerCoe;
      });

      if (isTest) {
        let arr2 = [];
        for (let i = 0; i < arr.length; i++) {
          arr2.push({
            row: arr[i].data.tender_rowNo,
            code: arr[i].data.code + " " + arr[i].data.name,
            diff: arr[i].data.tender_diffValuePerCoe,
          });
        }
        console.log(arr2);
      }

      return arr;
    }

    // 每单位差值的定额结点列表中，取离给定值最近的定额结点。
    function getCloseNode(arr, value) {
      let index = 0;
      let d_value = Number.MAX_VALUE;
      for (let i = 0; i < arr.length; i++) {
        let new_d_value = Math.abs(arr[i].data.tender_diffValuePerCoe - value);
        if (new_d_value <= d_value) {
          if (
            new_d_value === d_value &&
            arr[i].data.tender_diffValuePerCoe <
              arr[index].data.tender_diffValuePerCoe
          ) {
            continue;
          }
          index = i;
          d_value = new_d_value;
        }
      }
      return { idx: index, node: arr[index] };
    }

    // 逼近(单轮)。arr 参考取值列表。返回{type, node, nodeIdx}。
    // type：1正常，2无结点，3结点过调。node：结点。nodeIdx：结点在列表中的索引位置。node.data.tender_rowNo 在UI上的行号。
    function approach(arr) {
      let v = getRootDiff();
      let obj = getCloseNode(arr, Math.abs(v)); // {idx, node}  极端:{0, undefind}
      let closeNode = obj.node;
      if (!closeNode) return { type: 2, node: undefined, nodeIdx: -1 }; // arr 被清空了

      let d = v > 0 ? -G_DIGIT : G_DIGIT;
      let coe = calcTools.getCoe(closeNode, tender);
      if (coe + d < 0) return { type: 3, node: obj.node, nodeIdx: obj.idx }; // 再调的话，系数就变负数了，过调

      if (tender == tenderTypes.ttReverseRation) {
        closeNode.data.tender_previousCoe = closeNode.data.rationQuantityCoe; // tender_previousCoe: 上一次的调整系数，用于撤回
        closeNode.data.rationQuantityCoe = (
          closeNode.data.rationQuantityCoe + d
        ).toDecimal(decimalObj.process);
      } else if (tender == tenderTypes.ttReverseGLJ) {
        if (calcTools.isVP_or_GLJR(closeNode)) {
          closeNode.data.tender_previousCoe = closeNode.data.rationQuantityCoe;
          closeNode.data.rationQuantityCoe = (
            closeNode.data.rationQuantityCoe + d
          ).toDecimal(decimalObj.process);
        } else {
          closeNode.data.tender_previousCoe = closeNode.data.quantityCoe.labour;
          closeNode.data.quantityCoe.labour = (
            closeNode.data.quantityCoe.labour + d
          ).toDecimal(decimalObj.process);
          closeNode.data.quantityCoe.material = (
            closeNode.data.quantityCoe.material + d
          ).toDecimal(decimalObj.process);
          closeNode.data.quantityCoe.machine = (
            closeNode.data.quantityCoe.machine + d
          ).toDecimal(decimalObj.process);
          closeNode.data.quantityCoe.main = (
            closeNode.data.quantityCoe.main + d
          ).toDecimal(decimalObj.process);
          closeNode.data.quantityCoe.equipment = (
            closeNode.data.quantityCoe.equipment + d
          ).toDecimal(decimalObj.process);
        }
      }

      me.calculate(closeNode, true, true, tenderTypes.ttCalc);
      return { type: 1, node: obj.node, nodeIdx: obj.idx };
    }

    // 撤消最后一轮逼近（调过头了，回退一步）
    function undoLastApproach(obj) {
      let closeNode = obj.node;
      let coe = closeNode.data.tender_previousCoe;
      if (tender == tenderTypes.ttReverseRation) {
        closeNode.data.rationQuantityCoe = coe;
      } else if (tender == tenderTypes.ttReverseGLJ) {
        if (calcTools.isVP_or_GLJR(closeNode)) {
          closeNode.data.rationQuantityCoe = coe;
        } else {
          closeNode.data.quantityCoe.labour = coe;
          closeNode.data.quantityCoe.material = coe;
          closeNode.data.quantityCoe.machine = coe;
          closeNode.data.quantityCoe.main = coe;
          closeNode.data.quantityCoe.equipment = coe;
        }
      }

      me.calculate(closeNode, true, true, tenderTypes.ttCalc);
      if (isTest) {
        let _sp = `　　　　　　　　`; // 保留空格，打印对齐
        let _node = `[行${obj.node.data.tender_rowNo} 索引${obj.nodeIdx}]`;
        console.log(`${_sp} ${_node} 过调，已回退`);
      }
    }

    let root = tender_obj.tenderTree.roots[0];
    let propV = getPropV(root);
    let vArr = getNodeDiffs();
    let d1 = getRootDiff();

    if (isTest) {
      let _tq = `调前${root.data.feesIndex.common.totalFee}`;
      let _mb = `目标${root.data.targetTotalFee}`;
      let _wbj = `调后无逼近${root.data.feesIndex.common.tenderTotalFee}`;
      let _cz = `差值${d1}`;
      let _js = `轮${times} 系数步距${G_DIGIT}`;
      let _yx =
        calcModel == 2
          ? `速度优先(差比${diffProp} 差域0~${propV})`
          : "精度优先";
      console.log(`${_tq}|${_mb}|${_wbj}|${_cz}|${_yx}|${_js}`);
    }

    // 多轮逼进
    for (let i = 1; i <= times; i++) {
      // 与目标金额差值在1以内，整数部分已相同，结果很棒。很多时候能达到完美的差值0，但不能用0判断，因为金额取小数时有问题。
      if (Math.abs(d1) < 1) break;
      // 速度优先模式下，结果到达差值范围内，即熔断逼近。
      if (calcModel == 2) {
        if (Math.abs(d1) < propV) break;
      }

      let obj = approach(vArr);
      if (obj.type == 2) break; // 结点耗完，列表已清空，无结点可调。
      if (obj.type == 3) {
        // 结点过调，该结点任务已完成，不再参与调节，从列表中清除
        vArr.splice(obj.nodeIdx, 1);
        continue;
      }

      let d2 = getRootDiff();

      if (isTest) {
        let _time = `【第 ${i} 轮】调整`;
        let _node = `[行${obj.node.data.tender_rowNo} 索引${obj.nodeIdx}]`;
        let _coe = `${obj.node.data.tender_previousCoe} → ${calcTools.getCoe(
          obj.node,
          tender
        )}`;
        let _d = `差值${d1} → ${d2}`;
        console.log(`${_time}${_node} ${_coe}，${_d}`);
      }

      if (Math.abs(d2) > Math.abs(d1)) {
        // 逼近后差值反而变大，证明此轮调节不合适，回退一步，并将结点从列表清除
        undoLastApproach(obj);
        vArr.splice(obj.nodeIdx, 1);
      } else if (Math.abs(d2) == Math.abs(d1)) {
        // 调前调后差距相同时，会死循环，也从列表中清除
        vArr.splice(obj.nodeIdx, 1);
      } else {
        d1 = d2;
      }
    }

    // 重要注释：到这里，所有系数已处理就绪，最后直接全局正算即可。
    // 到这一步，被处理的定额、及其受影响的父结点、引用结点等均已正算完成（approach方法、undoLastApproach方法），但都未保存。
    // 最后全局正算目的：⑴计算除第一部以外的其它部分 ⑵保存。正算在调用外面完成。
    // this.calcAllNodesAndSave(calcAllType.catAll, callback, tenderTypes.ttCalc);
  }

  setRationMap() {
    if (this.rationMap == null) {
      this.rationMap = {};
      for (let glj of projectObj.project.ration_glj.datas) {
        if (this.rationMap[glj.rationID]) {
          this.rationMap[glj.rationID].push(glj);
        } else {
          this.rationMap[glj.rationID] = [glj];
        }
      }
    }
    if (this.pgljMap == null) {
      this.pgljMap = _.indexBy(
        projectObj.project.projectGLJ.datas.gljList,
        "id"
      );
    }
  }

  getGljArrByRation(ration) {
    if (ration.itemType == "定额") {
      //分摊定额
      return divideObj.getRationGLJDatas(ration);
    }
    if (ration.type == rationType.gljRation) {
      let glj = JSON.parse(JSON.stringify(ration));
      glj.type = glj.subType;
      glj.quantity = 1;
      glj.totalQuantity = parseFloatPlus(ration.quantity);
      return [glj];
    } else {
      if (!this.rationMap) return [];
      let result = this.rationMap[ration.ID];
      if (!result) return [];
      result = gljOprObj.combineWithProjectGlj(
        result,
        false,
        ration,
        this.pgljMap
      );
      return result;
    }
  }

  doTenderCalc(callback) {
    $.bootstrapLoading.start();
    setTimeout(() => {
      let tender = calcTools.getTenderType();
      if (
        tender == tenderTypes.ttReverseGLJ ||
        tender == tenderTypes.ttReverseRation
      ) {
        // 调价计算必须依赖调价树。
        if (!tender_obj.tenderTree) {
          tender_obj.createTree();
          tender_obj.createTreeNodes();
        }
        // 反向调价+逼近原理：
        // 清理调价缓存 → 分摊目标金额（从子往父处理满载、从父往子分摊） → 全局反算 → 逼近 → 全局正算、存储
        this.reverseTenderInitDatas();
        this.prepareForDistribute(tender_obj.tenderTree.roots[0]);
        this.distributeTargetTotalFee(tender_obj.tenderTree.roots[0]);
        this.calcAllNodes(calcAllType.catAll, tender); // 先全局反算：得到每定额的coe、基础调后金额（误差大，需逼近）
        this.reverseTenderApproach(callback, tender); // 逼近上述基础调后金额
      }

      // 全局正算（用的是主树，无需调价树）
      this.calcAllNodesAndSave(
        calcAllType.catAll,
        callback,
        tenderTypes.ttCalc
      );
    });
  }
}

// export default analyzer;