YangHuCost/web/building_saas/complementary_glj_lib/js/glj.js

/**
 * Created by Zhong on 2017/8/14.
 */

$(document).ready(function () {
    $('#component').on('shown.bs.modal', function () {
        if (componentOprObj.workBook) {
            componentOprObj.workBook.refresh();
        }
    });
    let moduleName = 'compleGLj';
    SlideResize.loadHorizonWidth(moduleName, [$('#rightResize'), $('#leftResize')], [$('#leftContent'), $('#midContent'), $('#rightContent')], function () {
        refreshALlWorkBook();
    });
    //章节树与人材机表
    let leftElesObj = {};
    leftElesObj.module = moduleName;
    leftElesObj.resize = $('#leftResize');
    leftElesObj.parent = $('#dataRow');
    leftElesObj.left = $('#leftContent');
    leftElesObj.right = $('#midContent');
    SlideResize.horizontalSlide(leftElesObj, {min: 200, max: `$('#dataRow').width() - $('#rightContent').width() - 200`}, function () {
        refreshALlWorkBook();
    });
    //人材机表与人材机组成物表
    let rightElesObj = {};
    rightElesObj.module = moduleName;
    rightElesObj.resize = $('#rightResize');
    rightElesObj.parent = $('#dataRow');
    rightElesObj.left = $('#midContent');
    rightElesObj.right = $('#rightContent');
    SlideResize.horizontalSlide(rightElesObj, {min: 200, max: `$('#dataRow').width() - $('#leftContent').width() - 200`}, function () {
        let resizeRate = 500 / $('#midContent').width(),
            sheetRate = 100 - resizeRate;
        $('#leftResize').css('width', `${resizeRate}%`);
        $('#GLJListSheet').css('width', `${sheetRate}%`);
        refreshALlWorkBook();
    });
});
function refreshALlWorkBook() {
    if (gljClassTreeObj.workBook) {
        gljClassTreeObj.workBook.refresh();
    }
    if (repositoryGljObj.workBook) {
        repositoryGljObj.workBook.refresh();
    }
    if (gljComponentOprObj.workBook) {
        gljComponentOprObj.workBook.refresh();
    }
}
let pageOprObj = {
    gljLibName : null,
    stdGljLibId: null,
    userId: null,
    compilationId: null,
    initPage : function(container, containerComponent, containerC) {
        let me = pageOprObj;
        me.stdGljLibId = stdGljLibId;
        me.userId = userId;
        me.compilationId = compilationId;
        repositoryGljObj.buildSheet(container);
        gljComponentOprObj.buildSheet(containerComponent);
        componentOprObj.buildSheet(containerC);
        //获得定额库中引用此工料机库中的，所有被定额所套的工料机的ID
        //repositoryGljObj.getRationGljIds(gljLibId);
        repositoryGljObj.getGljDistType(function () {
            repositoryGljObj.currentRepositoryId = me.stdGljLibId;
            gljClassTreeObj.getGljClassTree(stdGljLibId, function () {
                repositoryGljObj.getGljItems(me.stdGljLibId, function () {
                    gljClassTreeObj.initSelection(gljClassTreeObj.tree.selected);
                });
            });
        });
    }
};

let repositoryGljObj = {
    treeObj : null,
    workBook: null,
    // 是否获取了完整的人材机数据
    // 第一次打开页面只加载补充人材机和标准人材机的编码
    // 第一次打开选择组成物的窗口才加载标准人材机剩余数据
    pullCompleteData: false,
    gljCurTypeId: -1,
    currentRepositoryId: -1,
    currentCache: null,
    parentNodeIds: {},
    gljList: [],
    stdGljList:[],
    complementaryGljList: [],
    feeDataCode: ['grossWeightCoe', 'purchaseStorageRate', 'offSiteTransportLossRate', 'handlingLossRate'],
    distTypeTree: null,//add
    setting: {
        header:[
            {headerName:"编码",headerWidth:80,dataCode:"code", dataType: "String", formatter: "@", hAlign: "left", vAlign: "center"},
            {headerName:"名称",headerWidth:160,dataCode:"name", dataType: "String", hAlign: "left", vAlign: "center"},
            {headerName:"规格型号",headerWidth:120,dataCode:"specs", dataType: "String", formatter: "@", hAlign: "left", vAlign: "center"},
            {headerName:"单位",headerWidth:45,dataCode:"unit", dataType: "String", hAlign: "center", vAlign: "center"},
            {headerName:"定额价",headerWidth:80,dataCode:"basePrice", dataType: "Number", formatter: "0.00", hAlign: "right", vAlign: "center"},
            {headerName:"类型",headerWidth:90,dataCode:"gljType", dataType: "String", hAlign: "center", vAlign: "center"},
            {headerName:"毛重系数",headerWidth:90,dataCode:"grossWeightCoe", dataType: "Number", hAlign: "center", vAlign: "center"},
            {headerName:"采购保管费率",headerWidth:90,dataCode:"purchaseStorageRate", dataType: "Number", hAlign: "center", vAlign: "center"},
            {headerName:"场外运输损耗率",headerWidth:100,dataCode:"offSiteTransportLossRate", dataType: "Number", hAlign: "center", vAlign: "center"},
            {headerName:"每增一次装卸损耗率",headerWidth:100,dataCode:"handlingLossRate", dataType: "Number", hAlign: "center", vAlign: "center"},
            {headerName:"是否新增",headerWidth:60,dataCode:"isComplementary", hAlign: "center", vAlign: "center"}
        ],
        view:{
            comboBox:[
                {row:-1,col:3,rowCount:-1,colCount:1}
            ],
            lockedCells:[
            ]
        }
    },
    setUnitCombo: function (sheet, headers) {
        let me = this;
        sheet.suspendPaint();
        sheet.suspendEvent();
        let combo = sheetCommonObj.getDynamicCombo();
        combo.items(rationAndGljUnits).itemHeight(10).editable(true);
        for(let i = 0; i < headers.length; i++){
            if(headers[i].dataCode === 'unit'){
                sheet.getRange(-1, i, -1, 1).cellType(combo);
                break;
            }
        }
        sheet.resumePaint();
        sheet.resumeEvent();
    },
    getComboData: function (gljDistType) {
        let distType;
        let distTypeTree = {
            prefix : 'gljType',
            distTypes: {},
            comboDatas: [],
            distTypesArr: []
        };
        gljDistType.forEach(function (typeData) {
            let typeObj = {
                data: typeData,
                children: [],
                parent: null
            };
            distTypeTree.distTypes[distTypeTree.prefix + typeData.ID] = typeObj;
            distTypeTree.distTypesArr.push(typeObj);
        });
        gljDistType.forEach(function (typeData) {
            distType = distTypeTree.distTypes[distTypeTree.prefix + typeData.ID];
            let parent = distTypeTree.distTypes[distTypeTree.prefix + typeData.ParentID];
            if(parent){
                distType.parent = parent;
                parent.children.push(distType);
            }
        });
        distTypeTree.distTypesArr.forEach(function (distTypeObj) {
            if(allowGljType.includes(distTypeObj.data.ID)){
                distTypeTree.comboDatas.push({text: distTypeObj.data.fullName, value: distTypeObj.data.ID});
            }
        });
        return distTypeTree;
    },
    getGljDistType: function (callback) {
        let me = this;
        CommonAjax.post('/complementartGlj/api/getGljDistType', {}, function (rstData) {
            if(callback){
                me.distTypeTree = me.getComboData(rstData);
                console.log(me.distTypeTree);
                callback();
            }
        });
    },
    //获取工料机类型大类
    getParentType: function (type) {
        return parseInt(type.toString()[0]);
    },
    getGljTree: function(gljLibId, callback) {
        let me = this;
        CommonAjax.post('/complementartGlj/api/getGljTree', {gljLibId: gljLibId}, function (rstData) {
            zTreeHelper.createTree(rstData, gljSetting, "repositoryTree", me);
            zTreeHelper.createTree(rstData, componentSetting, "componentTree", componentOprObj);
            if (rstData && rstData.length > 0) {
                me.gljCurTypeId = rstData[0].ID;
            } else {
                //重新创建库？
               // gljTypeTreeOprObj.addRootNode();
            }
            if(callback){
                callback();
            }
        });
    },
    getGljItems: function(stdGljLibId, callback) {
        let me = this,
            // 一开始获取的标准人材机只包含code,提升打开页面速度
            projection = {
                _id: 0,
                ID: 1,
                code: 1,
                unit: 1,
                name: 1,
                priceProperty: 1,
                basePrice: 1
            };
        $.bootstrapLoading.start();
        CommonAjax.post('/complementartGlj/api/getGljItems', {stdGljLibId, projection}, function (rstData) {
            me.stdGljList = rstData.stdGljs;
            //兼容多单价情况
            for(let sGlj of me.stdGljList){
                if(sGlj.priceProperty && typeof sGlj.priceProperty.price1 !== 'undefined') {
                    sGlj.basePrice = sGlj.priceProperty.price1;
                }
            }
            me.sortGlj(me.stdGljList);
            me.setProp('isStd', true, me.stdGljList);
            me.complementaryGljList = rstData.complementaryGljs;
            me.sortGlj(me.complementaryGljList);
            if(callback){
                callback();
            }
            $.bootstrapLoading.end();
        }, function () {
            $.bootstrapLoading.end();
        });
    },
    // 获取标准人材机数据
    getStdItems: function (stdGljLibId, callback) {
        $.bootstrapLoading.start();
        let me = this;
        let projection = {
            _id: 0,
            ID: 1,
            specs: 1,
            gljType: 1,
            shortName: 1,
            gljClass: 1
        };
        CommonAjax.post('/complementartGlj/api/getStdItems', {stdGljLibId, projection}, function (data) {
            me.pullCompleteData = true;
            // 更新标准人材机数据
            let IDMapping = {};
            for (let glj of data) {
                IDMapping[glj.ID] = glj;
            }
            for (let glj of me.stdGljList) {
                Object.assign(glj, IDMapping[glj.ID]);
            }
            callback();
            $.bootstrapLoading.end();
        }, function () {
            $.bootstrapLoading.end();
        });
    },
    showGljItems: function(data, type) {
        let me = repositoryGljObj;
        let sheet = me.workBook.getActiveSheet();
        if (me.workBook) {
            let cacheSection = [];
            let pArr = me.parentNodeIds["_pNodeId_" + type];
            for (let i = 0; i < data.length; i++) {
                if (pArr && pArr.indexOf(data[i].gljClass) >= 0) {
                    cacheSection.push(data[i]);
                } else if (type == data[i].gljClass) {
                    cacheSection.push(data[i]);
                }
            }
            sheetOpr.cleanData(sheet, me.setting, -1);
            //清除是否新增复选框
            gljClassTreeObj.renderFunc(sheet, function () {
                let isComplementaryCol = 0;
                for(let colData of me.setting.header){
                    if(colData.dataCode === 'isComplementary'){
                        isComplementaryCol = me.setting.header.indexOf(colData);
                    }
                }
                let baseCell = new GC.Spread.Sheets.CellTypes.Base();
                for(let row = 0; row < sheet.getRowCount(); row++){
                    sheet.setCellType(row, isComplementaryCol, baseCell);
                }
            });
            sheetOpr.showData(sheet, me.setting, cacheSection, me.distTypeTree);
            sheetCommonObj.setDynamicCombo(sheet, 0, 5, sheet.getRowCount(), me.distTypeTree.comboDatas, false, 'text');
            cacheSection = null;
        }
    },
    bindEnterKey: function () {
        let me = this;
        let sheet = me.workBook.getActiveSheet();
        me.workBook.commandManager().register("myEnter", function(){
            let orgRow = sheet.getActiveRowIndex();
            let orgCol = sheet.getActiveColumnIndex();
            if(sheet.isEditing()){
                sheet.endEdit();
            }
            let code = sheet.getValue(orgRow, 0);
            let newRow, newCol;
            if(!me.currentCache[orgRow] && code !== undefined && code !== null && orgCol !== me.setting.header.length - 1){
                newRow = orgRow;
                newCol = orgCol + 1;
                sheet.setActiveCell(newRow, newCol);
            }
            else{
                newRow = orgRow + 1;
                newCol = me.currentCache[orgRow + 1] ? orgCol : 0;
                sheet.setActiveCell(newRow, newCol);
            }
            //触发事件
            //me.onLeaveCell({type: 'LeaveCell'}, {sheet: sheet, sheetName: sheet.name(), cancel: false, row: orgRow, col: orgCol});
            me.onEnterCell({type: 'EnterCell'}, {sheet: sheet, sheetName: sheet.name(), cancel: false, row: newRow, col: newCol});
            let newSels = [{row: newRow, rowCount: 1, col: newCol, colCount: 1}];
            let oldSels = [{row: orgRow, rowCount: 1, col: orgRow, colCount: 1}];
            me.onSelectionChanged({type: 'SelectionChanged'}, {sheet: sheet, sheetName: sheet.name(), newSelections: newSels, oldSelections: oldSels});
        });
        me.workBook.commandManager().setShortcutKey(null, GC.Spread.Commands.Key.enter, false, false, false, false);
        me.workBook.commandManager().setShortcutKey("myEnter", GC.Spread.Commands.Key.enter, false, false, false, false);
    },
    buildSheet: function(container) {
        let me = repositoryGljObj;
        me.workBook = sheetOpr.buildSheet(container, me.setting, 30);
        if (isReadOnly) {
            sheetCommonObj.disableSpread(me.workBook);
        }
        sheetCommonObj.spreadDefaultStyle(me.workBook);
        me.repositoryGljDelOpr();
        me.onContextmenuOpr();
        me.bindEnterKey();
        me.setUnitCombo(me.workBook.getActiveSheet(), me.setting.header);
        me.workBook.getActiveSheet().bind(GC.Spread.Sheets.Events.ClipboardPasting, me.onClipboardPasting);
        me.workBook.getActiveSheet().bind(GC.Spread.Sheets.Events.ClipboardPasted, me.onClipboardPasted);
        me.workBook.getSheet(0).bind(GC.Spread.Sheets.Events.EditStarting, me.onCellEditStart);
        me.workBook.getSheet(0).bind(GC.Spread.Sheets.Events.EditEnded, me.onCellEditEnd);
        me.workBook.getSheet(0).bind(GC.Spread.Sheets.Events.EnterCell, me.onEnterCell);
        me.workBook.getSheet(0).bind(GC.Spread.Sheets.Events.SelectionChanged, me.onSelectionChanged);
        me.workBook.bind(GC.Spread.Sheets.Events.ButtonClicked, me.onButtonClicked);//复选框点击事件
    },

    isDef: function (v) {
        return v !== undefined && v !== null;
    },

    getCurrentComponent: function (gljComponent) {
        let me = repositoryGljObj,
            rst = [];
        for(let thisGlj of gljComponent){
            let toFindGljList = thisGlj.isStd
                ? me.stdGljList
                : me.complementaryGljList;
            let matchGlj = toFindGljList.find(glj => glj.ID === thisGlj.ID);
            if (matchGlj) {
                rst.push({
                    isStd: thisGlj.isStd ? true : false,
                    ID: matchGlj.ID,
                    code: matchGlj.code,
                    name: matchGlj.name,
                    unit: matchGlj.unit,
                    basePrice: matchGlj.basePrice,
                    consumeAmt: thisGlj.consumeAmt
                });
            }
        }
        rst.sort(function (a, b) {
            let r = 0;
            if(a.code > b.code) r = 1;
            else if(a.code < b.code) r = -1;
            return r;
        });
        return rst;
    },
    //获得引用了组成物id为componentId的工料机，和重新变化组成物数组、重新计算单价
    getUpdateGljs: function (rObj, isDelete) {
        let me = repositoryGljObj, that = gljComponentOprObj,
            rst = {updateArr: [], updateBasePrcArr: []};
        //改变单价，以便reCalGljBasePrc方法可行
        if(!isDelete){
            for(let i = 0; i < me.complementaryGljList.length; i++){
                if(me.complementaryGljList[i].ID === rObj.ID){
                    me.complementaryGljList[i].basePrice = rObj.basePrice;
                    break;
                }
            }
        }
        for(let i = 0; i < me.complementaryGljList.length; i++){
            let thisComponent = me.complementaryGljList[i].component, isChange = false;
            for(let j = 0; j < thisComponent.length; j++){
                if(thisComponent[j].ID === rObj.ID){
                    //删除
                    isChange = true;
                    if(isDelete){
                        thisComponent.splice(j--, 1);
                    }
                    else {
                        break;
                    }
                }
            }
            if(isChange){//引用了此组成物
                let gljBasePrc = that.reCalGljBasePrc(me.getCurrentComponent(thisComponent));
                if(me.complementaryGljList[i].basePrice !== gljBasePrc){
                    me.complementaryGljList[i].basePrice = gljBasePrc;
                    rst.updateBasePrcArr.push({gljId: me.complementaryGljList[i].ID, gljType: me.complementaryGljList[i].gljType, basePrice: me.complementaryGljList[i].basePrice});
                }
                rst.updateArr.push(me.complementaryGljList[i]);
            }
        }
        return rst;
    },
    reshowGljBasePrc: function (glj) {
        let me = repositoryGljObj;
        let cacheSection = me.currentCache;
        for(let i = 0; i < cacheSection.length; i++){
            if(glj.ID === cacheSection[i].ID){
                cacheSection[i].basePrice = glj.basePrice;
                me.workBook.getSheet(0).setValue(i, 4, glj.basePrice);
                break;
            }
        }
    },
    onSelectionChanged: function (sender, info) {
        let me = repositoryGljObj, that = gljComponentOprObj;
        //混凝土202、砂浆203、配合比204、机械3
        if(typeof info.oldSelections || info.oldSelections.length === 0 && info.newSelections.length > 0 || info.oldSelections[0].row !== info.newSelections[0].row){
            let row = info.newSelections[0].row;
            me.initSel(row);
        }
    },
    initSel: function (row) {
        let me = repositoryGljObj, that = gljComponentOprObj, componentCanEdit = false;
        sheetOpr.cleanData(that.workBook.getSheet(0), that.setting, -1);
        me.workBook.focus(true);
        me.currentComponent = [];
        that.workBook.getSheet(0).setRowCount(5);
        if(row < me.currentCache.length){
            //标记当前工料机
            me.currentGlj = me.currentCache[row];
            if(allowComponent.includes(me.currentCache[row].gljType)){
                componentCanEdit = true;
                //展示数据
                if(me.currentGlj.component.length > 0){
                    me.currentComponent = me.getCurrentComponent(me.currentGlj.component);
                    if(me.currentComponent.length > 0){
                        sheetOpr.showData(that.workBook.getSheet(0), that.setting, me.currentComponent);
                    }
                }
            }
        } else{
            me.currentGlj = null;
        }
        //减少触发
        if (me.preComponentCanEdit !== componentCanEdit) {
            me.spreadControl(componentCanEdit);
            refreshALlWorkBook();
        }
        me.preComponentCanEdit = componentCanEdit;
    },
    //组成物表能编辑则显示，否则隐藏该工作表
    spreadControl: function (showComponent) {
        let leftWidth = getLocalCache('compleGLjleftContentWidth') || '50%',
            midWidth = getLocalCache('compleGLjmidContentWidth') || '25%',
            rightWidth = getLocalCache('compleGLjrightContentWidth') || '25%';
        [leftWidth, midWidth, rightWidth] = [leftWidth, midWidth, rightWidth].map((v) => parseFloat(v.replace('%', '')));
        let curMidWidth = parseFloat($('#midContent')[0].style.width.replace('%', '')),
            curRightWidth = parseFloat($('#rightContent')[0].style.width.replace('%', ''));
        if (showComponent) {
            if (leftWidth + midWidth + rightWidth > 100) {
                leftWidth = 50;
                midWidth = rightWidth = 25;
            }
        } else {
            midWidth = curMidWidth + curRightWidth;
            rightWidth = 0;
            leftWidth = 100 - midWidth;
        }
        $('#leftContent').css('width', `${leftWidth}%`);
        $('#midContent').css('width', `${midWidth}%`);
        $('#rightContent').css('width', `${rightWidth}%`);
    },
    onEnterCell: function (sender, args) {
        let me = repositoryGljObj;
        args.sheet.repaint();
        me.cellRowIdx = args.row;
        let isHasData = false;
        if(me.addGljObj){
            for(let i=0; i<me.setting.header.length; i++){
                if(me.addGljObj[me.setting.header[i].dataCode]){
                    isHasData = true;
                    break;
                }
            }
        }
        if(isHasData){
            if(me.editingRowIdx !== me.cellRowIdx) {
                let isComple = true;
                let focusToCol;
                function getFocusToCol (me){
                    if(!me.addGljObj[me.setting.header[0].dataCode]){
                        $('#alertGljTxt').text('编号不能为空，继续增加人材机?');
                        return 0;
                    }
                    else if(!me.addGljObj[me.setting.header[1].dataCode]){
                        $('#alertGljTxt').text('名称不能为空，继续增加人材机?');
                        return 1;
                    }
                    else if(!me.addGljObj[me.setting.header[3].dataCode]){
                        $('#alertGljTxt').text('计量单位不能为空，继续增加人材机?');
                        return 3;
                    }
                    else if(!me.addGljObj[me.setting.header[5].dataCode]){
                        $('#alertGljTxt').text('类型不能为空，继续增加人材机?');
                        return 5;
                    }
                    else {
                        return -1;
                    }
                }
                focusToCol = getFocusToCol(me);
                if(focusToCol === -1){

                }
                else {
                    $('#gljAlertBtn').click();
                    $('#aleConfBtn').unbind('click');
                    $('#aleConfBtn').bind('click', function () {
                        me.workBook.getSheet(0).setActiveCell(me.editingRowIdx, focusToCol);
                    });
                    $('#gljAleClose').unbind('click');
                    $('#gljAleClose').bind('click', function () {
                        me.workBook.getSheet(0).setActiveCell(me.editingRowIdx, focusToCol);
                    });
                    $('#aleCanceBtn').unbind('click');
                    $('#aleCanceBtn').bind('click', function () {
                        me.addGljObj = null;
                        me.workBook.getSheet(0).suspendPaint();
                        me.workBook.getSheet(0).suspendEvent();
                        for(let col=0; col<me.setting.header.length; col++){
                            if(col === 0){
                                me.workBook.getSheet(0).getCell(me.editingRowIdx, 0).formatter("@");
                            }
                            me.workBook.getSheet(0).getCell(me.editingRowIdx, col).value('');
                        }
                        me.workBook.getSheet(0).setActiveCell(me.editingRowIdx, 0);
                        me.workBook.getSheet(0).resumePaint();
                        me.workBook.getSheet(0).resumeEvent();
                    });
                }
            }
        }
    },
    onButtonClicked: function (sender, args) {
        let me = repositoryGljObj;
        if(me.setting.header[args.col].dataCode === 'isComplementary' && args.row < me.currentCache.length){
            args.sheet.setValue(args.row, args.col, true);
        }
    },
    onCellEditStart: function(sender, args) {
        let me = repositoryGljObj;
        let rObj = sheetOpr.combineRowData(me.workBook.getSheet(0), me.setting, args.row);
        me.currentEditingGlj = rObj;
        me.orgCode = me.workBook.getSheet(0).getValue(args.row, 0);
        let dataCode = me.setting.header[args.col].dataCode;
        if(args.row < me.currentCache.length){
            me.currentGlj = me.currentCache[args.row];
            //费率数据列只有普通材料能用，可添加组成物的人材机，基价只读
            if (dataCode === 'code'|| (me.feeDataCode.includes(dataCode) && me.getParentType(me.currentGlj.gljType) !== 2) ||
                (dataCode === 'basePrice' && allowComponent.includes(me.currentGlj.gljType)) ||
                dataCode === 'isComplementary'){
                args.cancel = true;
            } else {
                rObj.ID = me.currentGlj.ID;
                rObj.gljClass = me.currentGlj.gljClass;
            }
        } else {
            me.currentGlj = null;
        }
    },
    onCellEditEnd: function(sender, args) {
        let me = repositoryGljObj, that = gljComponentOprObj;
        // 输入编号、名称、规格时，如果输入回车符或粘贴回车符，提交时应转换为空格。
        let deESCFields = ['code', 'name', 'specs'];
        let dataCode = me.setting.header[args.col].dataCode;
        if(deESCFields.includes(dataCode)){
            args.editingText = me.isDef(args.editingText) 
                ? args.editingText.toString().replace(/[\r, \n]/g, ' ').replace(/\s$/, '')
                : '';
            args.sheet.setValue(args.row, args.col, args.editingText);
        }
        let rObj = sheetOpr.combineRowData(me.workBook.getSheet(0), me.setting, args.row, me),
            updateArr = [],
            addArr = [],
            updateBasePrcArr = [];
        me.editingRowIdx = args.row;
        rObj.basePrice = rObj.basePrice ? rObj.basePrice : 0;
        //更新
        if (me.currentEditingGlj["ID"]) {
            rObj["ID"] = me.currentEditingGlj["ID"];
            rObj.gljClass = me.currentEditingGlj.gljClass;
                if(me.currentEditingGlj[dataCode] !== rObj[dataCode]){
                    //编码、名称、单位、类型不可为空
                    if(rObj.code && rObj.name && rObj.unit && rObj.gljType
                    &&rObj.code.toString().trim().length !== 0 && rObj.name.toString().trim().length !== 0 && rObj.unit.toString().trim().length !== 0&&
                        rObj.gljType.toString().trim().length !== 0){
                        if(rObj.gljType !== me.currentEditingGlj.gljType){//修改了工料机类型
                            if(me.currentGlj){
                                me.currentGlj.component = [];
                            }
                            //工料机类型不为普通材料时，情况费率数据
                            if (me.getParentType(me.currentEditingGlj.gljType) === 2 && me.getParentType(rObj.gljType) !== 2) {
                                for (let feeCode of me.feeDataCode) {
                                    if (me.currentEditingGlj[feeCode]) {
                                        rObj[feeCode] = null;
                                    }
                                }
                            }
                            if(componentType.includes(me.currentEditingGlj.gljType) &&
                                !(machineComponent.includes(me.currentEditingGlj.gljType) && machineComponent.includes(rObj.gljType))
                                && !(materialComponent.includes(me.currentEditingGlj.gljType) && materialComponent.includes(rObj.gljType))){//修改了原本是组成物的工料机
                                //寻找所有引用了此组成物的工料机,并从组成物中删去此工料机,并重算单价
                                let updateGljs = me.getUpdateGljs(rObj, true);
                                if(updateGljs.updateArr.length > 0 || updateGljs.updateBasePrcArr.length > 0){
                                    for(let i = 0; i < updateGljs.updateArr.length; i++){
                                        updateArr.push(updateGljs.updateArr[i]);
                                    }
                                    for(let i = 0; i < updateGljs.updateBasePrcArr.length; i++){
                                        updateArr.push(updateGljs.updateBasePrcArr[i]);
                                    }
                                }
                            }
                            sheetOpr.cleanData(that.workBook.getSheet(0), that.setting, 5);
                        } else if (me.feeDataCode.includes(dataCode) && rObj[dataCode] !== me.currentEditingGlj[dataCode]) {
                            if(isNaN(rObj[dataCode])){
                                args.sheet.setValue(args.row, args.col, me.currentEditingGlj[dataCode] ? me.currentEditingGlj[dataCode] : '');
                                alert(`${me.setting.header[args.col].headerName}只能输入数值！`);
                                return;
                            }
                        } else if(rObj.basePrice !== me.currentEditingGlj.basePrice){//修改了单价,可修改单价的必为可成为组成物的
                            //寻找所有引用了此组成物的工料机,并从组成物中删去此工料机,并重算单价
                            if(isNaN(parseFloat(rObj.basePrice))){
                                alert('单价只能为数值！');
                                args.sheet.setValue(args.row, args.col, me.currentEditingGlj.basePrice ? me.currentEditingGlj.basePrice : 0);
                                return;
                            }
                            rObj.basePrice = !isNaN(parseFloat(rObj.basePrice))? scMathUtil.roundTo(parseFloat(rObj.basePrice), -2) : me.currentEditingGlj.basePrice;
                            let updateGljs = me.getUpdateGljs(rObj);
                            if(updateGljs.updateArr.length > 0 || updateGljs.updateBasePrcArr.length > 0){
                                for(let i = 0; i < updateGljs.updateArr.length; i++){
                                    updateArr.push(updateGljs.updateArr[i]);
                                }
                                for(let i = 0; i < updateGljs.updateBasePrcArr.length; i++){
                                    updateArr.push(updateGljs.updateBasePrcArr[i]);
                                }
                            }
                        }
                        rObj.component = me.currentGlj.component;
                        updateArr.push(rObj);
                    }
                    else{
                        if(dataCode === 'gljType'){
                            let distTypeVal =  me.distTypeTree.distTypes[me.distTypeTree.prefix + me.currentEditingGlj[dataCode]].data.fullName;
                            args.sheet.setValue(args.row, args.col, distTypeVal);
                        }
                        else{
                            args.sheet.setValue(args.row, args.col, me.currentEditingGlj[dataCode]);
                        }
                    }
                }
            //--------------------------------------
            if(me.currentEditingGlj.basePrice !== rObj.basePrice){
                //update basePrice of ration when editting basePrice of glj
                let gljType = -1;
                let gljTypeParent = me.distTypeTree.distTypes[me.distTypeTree.prefix + me.currentEditingGlj.gljType].parent;
                if(gljTypeParent && gljTypeParent.data.ID <=3){
                    gljType = gljTypeParent.data.ID;
                }
                if(!gljTypeParent && me.currentEditingGlj.gljType <= 3){
                    gljType = me.currentEditingGlj.gljType;
                }
                let gljBasePrcObj = {gljId: me.currentEditingGlj.ID, gljType: gljType, basePrice: rObj.basePrice};
                if(gljBasePrcObj.gljType !== -1){
                    updateBasePrcArr.push(gljBasePrcObj);
                    me.updateRationBasePrcRq(updateBasePrcArr);
                }
            }
            //update basePrice of ration when editting gljType of glj
            if(me.currentEditingGlj.gljType !== rObj.gljType){
                let gljTypeObj = {gljId: me.currentEditingGlj.ID, gljType: rObj.gljType, basePrice: rObj.basePrice};
                updateBasePrcArr.push(gljTypeObj);
                me.updateRationBasePrcRq(updateBasePrcArr);
            }
            //-----------------------------------------------------------
        }
        //新增
        else {
            if(typeof rObj.code !== 'undefined'){
                me.addGljObj = rObj;
                let isCanSav = true;
                if(!rObj.code || !rObj.name || !rObj.unit || !rObj.gljType){
                    isCanSav = false;
                }
                if(isCanSav){
                    me.addGljObj = null;
                    rObj.component = [];
                    rObj.basePrice = !isNaN(parseFloat(rObj.basePrice)) && (rObj.basePrice && typeof rObj.basePrice !== 'undefined') ? parseFloat(rObj.basePrice) : 0;
                    addArr.push(rObj);
                }
            }
        }
        if(!me.parentNodeIds["_pNodeId_" + me.gljCurTypeId]){
            rObj.gljClass = me.gljCurTypeId;
        }
        if(updateArr.length >0 || addArr.length >0){
            me.currentEditingGlj = null;
            me.mixUpdateRequest(updateArr, addArr, []);
        }
    },
    delGljs: function (sels) {
        let me = repositoryGljObj;
        let updateArr = [], removeArr = [],
            updateBasePrcArr = [],//删除基价单位后重新计算
            canUpdate = false,
            cacheSection = me.currentCache;
        if(sels.length > 0 && cacheSection.length > 0){
            for(let i = 0; i < sels.length; i++){
                if(sels[i].colCount === me.setting.header.length){
                    for(let j = 0; j < sels[i].rowCount; j++){
                        if(sels[i].row + j < cacheSection.length){
                            //删除了已被引用成组成物的工料机，重新计算所有引用此组成物的工料机的单价、组成物数组
                            let updateGljs = me.getUpdateGljs(cacheSection[sels[i].row + j], true);
                            if(updateGljs.updateArr.length > 0 || updateGljs.updateBasePrcArr.length > 0){
                                for(let i = 0; i < updateGljs.updateArr.length; i++){
                                    updateArr.push(updateGljs.updateArr[i]);
                                }
                                for(let i = 0; i < updateGljs.updateBasePrcArr.length; i++){
                                    updateBasePrcArr.push(updateGljs.updateBasePrcArr[i]);
                                }
                            }
                            removeArr.push(cacheSection[sels[i].row + j].ID);
                            //删除后重新计算引用了此工料机的定额单价
                            updateBasePrcArr.push({gljId: cacheSection[sels[i].row + j].ID, gljType: cacheSection[sels[i].row + j].gljType, basePrice: 0, delete: 1});
                        }
                    }
                }
                else{
                    let maxCol = sels[i].col + sels[i].colCount - 1;
                    if(sels[i].col >= 2 && maxCol <= 4){
                        for(let j = 0; j < sels[i].rowCount; j++){
                            if(sels[i].row + j < cacheSection.length){
                                let updateObj = cacheSection[sels[i].row + j];
                                for(let col = sels[i].col; col <= maxCol; col++){
                                    if(me.setting.header[col].dataCode === 'basePrice'){
                                        //如果类型不为混凝土、砂浆、配合比、机械，才可删除单价 basePrice = 0
                                        if(!allowComponent.includes(updateObj.gljType)){
                                            canUpdate = true;
                                            updateObj[me.setting.header[col].dataCode] = 0;
                                            updateBasePrcArr.push({gljId: updateObj.ID, gljType: updateObj.gljType, basePrice: 0});
                                        }
                                    }
                                    else{
                                        canUpdate = true;
                                        updateObj[me.setting.header[col].dataCode] = '';
                                    }
                                }
                                if(canUpdate){
                                    updateArr.push(updateObj);
                                }
                            }
                        }
                    }
                    //编号、名称、类型不可为空
                    else{
                        if(sels[i].row < cacheSection.length){
                            let text = '', cantNullStr =['编码', '名称', '类型'];
                            for(let col = sels[i].col; col <= sels[i].col + sels[i].colCount -1; col++){
                                if(cantNullStr.indexOf(me.setting.header[col].headerName) !== -1){
                                    text += me.setting.header[col].headerName + " ";
                                }
                            }
                            $('#alertText').text(text + "不可为空！");
                            $('#codeAlertBtn').click();
                            $('#codAleConfBtn').click(function () {
                            });
                            $('#codAleClose').click(function () {
                            });
                        }
                    }
                }
            }
            if(removeArr.length > 0 || updateArr.length > 0){
                //删除警告
                $('#alertGljTxt').text('可能已有定额引用了当前工料机，导致定额查找不到此工料机。确定要删除吗？');
                $('#gljAlertBtn').click();
                //确认
                $('#aleConfBtn').unbind('click');
                $('#aleConfBtn').bind('click', function () {
                    me.mixUpdateRequest(updateArr, [], removeArr);
                    /*if(updateBasePrcArr.length > 0 && me.rationLibs.length > 0){
                     me.updateRationBasePrcRq(updateBasePrcArr);
                     }*/
                });
            }
        }
    },
    repositoryGljDelOpr: function () {
        let me = repositoryGljObj;
        me.workBook.commandManager().register('repositoryGljDel', function () {
            let sels = me.workBook.getActiveSheet().getSelections();
            me.delGljs(sels);
        });
        me.workBook.commandManager().setShortcutKey(null, GC.Spread.Commands.Key.del, false, false, false, false);
        me.workBook.commandManager().setShortcutKey('repositoryGljDel', GC.Spread.Commands.Key.del, false, false, false, false);
    },
    onContextmenuOpr: function () {
        let me = repositoryGljObj;
        $.contextMenu({
            selector: '#GLJListSheet',
            build: function($triggerElement, e){
                //控制允许右键菜单在哪个位置出现
                let sheet = me.workBook.getSheet(0);
                let offset = $("#GLJListSheet").offset(),
                    x = e.pageX - offset.left,
                    y = e.pageY - offset.top;
                let target = sheet.hitTest(x, y);
                let sel = sheet.getSelections()[0];
                if(sel.row === -1){
                    sel.row = 0;
                }
                if(sel.col === -1){
                    sel.col = 0;
                }
                if(target.hitTestType === 3 && typeof target.row !== 'undefined' && typeof target.col !== 'undefined'){//在表格内
                    me.initSel(target.row);
                    if(sel.row > target.row || sel.row + sel.rowCount - 1 < target.row ||
                        sel.col > target.col || sel.col + sel.colCount - 1 < target.col ){
                        sheet.setActiveCell(target.row, target.col);
                    }
                    return {
                        callback: function(){},
                        items: {
                            "delete": {
                                name: "删除",
                                disabled: function () {
                                    return isReadOnly || !(me.currentCache && me.currentCache[target.row]);
                                },
                                icon: "fa-remove",
                                callback: function (key, opt) {
                                    let curSel = _.cloneDeep(sheet.getSelections()[0]);
                                    curSel.colCount = me.setting.header.length;
                                    me.delGljs([curSel]);
                                }}
                        }
                    };
                }
                else{
                    return false;
                }
            }
        });
    },
    validUpdateObj: function (pasteObj, rowIdx) {
        let rst = {updateGlj: [], updateBasePrcArr: []}, backUpObj = {},
            me = repositoryGljObj,
            tempObj = me.currentCache[rowIdx],
            reCalBasePrc = false,
            isValid = true;
        //备份原始数据
        for(let atr in tempObj){
            backUpObj[atr] = tempObj[atr];
        }
        if(typeof pasteObj.code !== 'undefined'){
            if(pasteObj.code.trim().length !== 0){
                let isExist = false;
                for(let i = 0; i < me.stdGljList.length; i++){
                    if(me.stdGljList[i].code === pasteObj.code){
                        isExist = true;
                        break;
                    }
                }
                if(!isExist){
                    for(let i = 0; i < me.complementaryGljList.length; i++){
                        if(me.complementaryGljList[i].code === pasteObj.code){
                            isExist = true;
                            break;
                        }
                    }
                }
                if(!isExist){
                    tempObj.code = pasteObj.code;
                }
                else isValid = false;
            }
            else isValid = false;
        }
        if(typeof pasteObj.name !== 'undefined'){
            if(pasteObj.name.trim().length === 0) isValid = false;
            else tempObj.name = pasteObj.name;
        }
        if(typeof pasteObj.specs !== 'undefined'){
            tempObj.specs = pasteObj.specs;
        }
        if(typeof pasteObj.unit !== 'undefined'){
            tempObj.unit = pasteObj.unit;
        }
        if(typeof pasteObj.gljType !== 'undefined'){
            let isExsit = false;
            for(let i = 0; i < me.distTypeTree.comboDatas.length; i++){
                if(pasteObj.gljType === me.distTypeTree.comboDatas[i].text){
                    pasteObj.gljType = me.distTypeTree.comboDatas[i].value;
                    isExsit = true;
                    reCalBasePrc = true;
                    if (me.getParentType(pasteObj.gljType) !== 2 && me.getParentType(tempObj.gljType) === 2) {
                        for (let feeCode of me.feeDataCode) {
                            tempObj[feeCode] = null;
                        }
                    }
                    if(componentType.includes(tempObj.gljType)&&
                        !(machineComponent.includes(tempObj.gljType) && machineComponent.includes(pasteObj.gljType)) &&
                        !(materialComponent.includes(tempObj.gljType) && materialComponent.includes(pasteObj.gljType))){//修改了原本是组成物的工料机
                        //寻找所有引用了此组成物的工料机,并从组成物中删去此工料机,并重算单价
                        let updateGljs = me.getUpdateGljs(tempObj, true);
                        if(updateGljs.updateArr.length > 0 || updateGljs.updateBasePrcArr.length > 0){
                            for(let i = 0; i < updateGljs.updateArr.length; i++){
                                rst.updateGlj.push(updateGljs.updateArr[i]);
                            }
                            for(let i = 0; i < updateGljs.updateBasePrcArr.length; i++){
                                rst.updateBasePrcArr.push(updateGljs.updateBasePrcArr[i]);
                            }
                        }
                    }
                    tempObj.component = tempObj.gljType === me.distTypeTree.comboDatas[i].value ? tempObj.component : [];
                    tempObj.gljType = me.distTypeTree.comboDatas[i].value;
                    tempObj.shortName = me.distTypeTree.distTypes[me.distTypeTree.prefix + tempObj.gljType].data.shortName;
                    break;
                }
            }
            if(!isExsit) isValid = false;
        }
        for (let feeCode of me.feeDataCode) {
            if (typeof pasteObj[feeCode] !== 'undefined' && !isNaN(pasteObj[feeCode])) {
                if ((typeof pasteObj.gljType !== 'undefined' && me.getParentType(pasteObj.gljType) === 2) ||
                    (tempObj.gljType && me.getParentType(tempObj.gljType) === 2)) {
                    tempObj[feeCode] = pasteObj[feeCode];
                } else {
                    isValid = false;
                }
            }
        }
        //
        pasteObj.basePrice = !isNaN(parseFloat(pasteObj.basePrice)) && (pasteObj.basePrice && typeof pasteObj.basePrice !== 'undefined') ? scMathUtil.roundTo(parseFloat(pasteObj.basePrice), 2) :
            me.currentCache[rowIdx].basePrice;
        if(pasteObj.basePrice !== me.currentCache[rowIdx].basePrice){
            reCalBasePrc = true;
            tempObj.basePrice = pasteObj.basePrice;
            let updateGljs = me.getUpdateGljs(tempObj, false);
            if(updateGljs.updateArr.length > 0 || updateGljs.updateBasePrcArr.length > 0){
                for(let i = 0; i < updateGljs.updateArr.length; i++){
                    rst.updateGlj.push(updateGljs.updateArr[i]);
                }
                for(let i = 0; i < updateGljs.updateBasePrcArr.length; i++){
                    rst.updateBasePrcArr.push(updateGljs.updateBasePrcArr[i]);
                }
            }
        }
        if(isValid){
            rst.updateGlj.push(tempObj);
            if(reCalBasePrc){
                //重新计算定额基价对象
                let newReObj = {gljId: tempObj.ID, gljType: tempObj.gljType, basePrice: tempObj.basePrice};
                rst.updateBasePrcArr.push(newReObj);
            }
        }
        else {
            for(let attr in backUpObj){
                tempObj[attr] = backUpObj[attr];
            }
        }
        return rst;
    },
    //粘贴的数据是否是可添加的数据,只有含有编号，名称，类型才可添加
    isValidObj: function(pasteObj) {
        let me = repositoryGljObj;
        if(!(pasteObj.code && typeof pasteObj.code !== 'undefined') || !(pasteObj.name && typeof pasteObj.name !== 'undefined') ||
            !(pasteObj.gljType && typeof pasteObj.gljType !== 'undefined')){
            return false;
        }
        if(pasteObj.gljType && typeof pasteObj.gljType !== 'undefined'){
            let isExist = false;
            for(let i = 0; i < me.distTypeTree.comboDatas.length; i++){
                if(me.distTypeTree.comboDatas[i].text === pasteObj.gljType){
                    isExist = true;
                    pasteObj.gljType = me.distTypeTree.comboDatas[i].value;
                    pasteObj.shortName = me.distTypeTree.distTypes[me.distTypeTree.prefix + pasteObj.gljType].data.shortName;
                    break;
                }
            }
            if(!isExist){
                return false;
            }
        }
        if(pasteObj.code && typeof pasteObj.code !== 'undefined'){
            for(let i = 0; i < me.stdGljList.length; i++){
                if(me.stdGljList[i].code === pasteObj.code){
                    return false;
                }
            }
            for(let i = 0; i < me.complementaryGljList.length; i++){
                if(me.complementaryGljList[i].code === pasteObj.code){
                    return false;
                }
            }

        }
        for (let feeCode of me.feeDataCode) {
            if (typeof pasteObj[feeCode] !== 'undefined' && (isNaN(pasteObj[feeCode]) || me.getParentType(pasteObj.gljType) !== 2)) {
                return false;
            }
        }
        pasteObj.basePrice = !isNaN(parseFloat(pasteObj.basePrice)) && (pasteObj.basePrice && typeof pasteObj.basePrice !== 'undefined') ? parseFloat(pasteObj.basePrice) : 0;
        if(!me.parentNodeIds["_pNodeId_" + me.gljCurTypeId]){
            pasteObj.gljClass = me.gljCurTypeId;
        }
        return true;
    },
    canPasted: function (info) {
        let rst = true;
        let me = repositoryGljObj;
        if(me.gljCurTypeId < 0){
            return false;
        }
        if(info.cellRange.col + info.cellRange.colCount - 1 > me.setting.header.length - 2){
            return false;
        }
        if(info.cellRange.row < me.currentCache.length){
            if(info.cellRange.col === 0){
                return false;
            }
            //可添加组成物的人材机基价由组成物基价计算得来，基价列只读
            else if(info.cellRange.col <= 4 && info.cellRange.col + info.cellRange.colCount - 1 >= 4){
                for(let i = 0, len = info.cellRange.rowCount; i < len; i++){
                    let row = i + info.cellRange.row;
                    if(row < me.currentCache.length){
                        if(allowComponent.includes(me.currentCache[row].gljType)){
                            rst = false;
                        }
                    }
                    else {
                        break;
                    }
                }
            }
        }
        return rst;
    },
    onClipboardPasting: function(sender, args) {
        let me = repositoryGljObj;
        if (!me.canPasted(args)) {
            args.cancel = true;
        }
    },
    onClipboardPasted: function(e, info) {
        let me = repositoryGljObj;
        let updateArr = [], addArr = [];
        let items = sheetOpr.analyzePasteData(me.setting, info);
        let beginRow = info.cellRange.row, endRow = info.cellRange.row + info.cellRange.rowCount - 1,//复制的起始行数和结束行数
            maxRow = me.currentCache.length - 1,//当前数据最大行数
            updateBasePrcArr = [] ,
            updateCount, resumeArr = [];
        if(endRow <= maxRow){//只有更新
            for(let i = 0; i < items.length; i++){
                let updateObj = me.validUpdateObj(items[i], info.cellRange.row + i);
                if(updateObj && typeof updateObj.updateGlj !== 'undefined' && updateObj.updateGlj.length > 0){
                    updateArr = updateArr.concat(updateObj.updateGlj);
                    if(typeof updateObj.updateBasePrcArr !== 'undefined'){
                        updateBasePrcArr = updateBasePrcArr.concat(updateObj.updateBasePrcArr);
                    }
                }
            }
        } else if(beginRow <= maxRow && endRow > maxRow){//更新+新增
            updateCount = maxRow - beginRow + 1;
            for(let i = 0; i < updateCount; i++){
                let updateObj = me.validUpdateObj(items[i], info.cellRange.row + i);
                if(updateObj && typeof updateObj.updateGlj !== 'undefined'){
                    //updateArr = updateObj.updateGlj;
                    updateArr = updateArr.concat(updateObj.updateGlj);
                    if(typeof updateObj.updateBasePrcArr !== 'undefined'){
                        updateBasePrcArr = updateBasePrcArr.concat(updateObj.updateBasePrcArr);
                    }
                }
            }
            for(let i = updateCount ; i < items.length; i++){
                if(me.isValidObj(items[i])){
                    items[i].component = [];
                    addArr.push(items[i]);
                }
            }
        } else{//新增
            for(let i = 0; i < items.length; i++){
                if(me.isValidObj(items[i])){
                    items[i].component = [];
                    addArr.push(items[i]);
                }
            }
        }
        //repaint
        for(let i = 0; i < info.cellRange.rowCount; i++){
            resumeArr.push(info.cellRange.row + i);
        }
        if(resumeArr.length > 0){
            let sheet = me.workBook.getActiveSheet();
            sheet.suspendPaint();
            for(let i = 0; i < resumeArr.length ; i++){
                if(resumeArr[i] < me.currentCache.length){
                    for(let col = 0; col < me.setting.header.length -1; col++){
                        let dCode = me.setting.header[col].dataCode;
                        if(dCode === 'gljType'){
                            let gljType = me.currentCache[resumeArr[i]][dCode];
                            sheet.setValue(resumeArr[i], col, me.distTypeTree.distTypes["gljType" + gljType].data.fullName);
                        }
                        else{
                            sheet.setValue(resumeArr[i], col, me.currentCache[resumeArr[i]][dCode]);
                        }
                    }
                }
                else{
                    for(let col = 0; col < me.setting.header.length - 1; col++){
                        sheet.setValue(resumeArr[i], col, '', GC.Spread.Sheets.SheetArea.viewport);
                    }
                }
            }
            sheet.resumePaint();
        }
        if (updateArr.length > 0 || addArr.length > 0) {
            me.mixUpdateRequest(updateArr, addArr, []);
        }
        if(updateBasePrcArr.length > 0 && me.rationLibs.length > 0){
            me.updateRationBasePrcRq(updateBasePrcArr);
        }
    },
    updateRationBasePrcRq: function (basePrcArr) {
        CommonAjax.post('/complementartGlj/api/updateRationBasePrc', {basePrcArr: basePrcArr}, function (rstData) {
        });
    },
  /*  getRationGljIds: function (repId) {
        let me = repositoryGljObj;
        $.ajax({
            type: 'post',
            url: 'api/getRationGljIds',
            data: {data: JSON.stringify({repId: repId})},
            dataType: 'json',
            success: function(result){
                if(!result.error){
                    me.rationGljIds = result.data;
                }
            }
        });
    },*/
    mixUpdateRequest: function(updateArr, addArr, removeIds) {
        let me = repositoryGljObj;
        if(updateArr.length > 0){
            me.saveInString(updateArr);
        }
        if(addArr.length > 0){
            me.saveInString(addArr);
        }
        let url = '/complementartGlj/api/mixUpdateGljItems';
        let post = {updateItems: updateArr, addItems: addArr, removeIds: removeIds};
        let scCaller = function (rstData) {
            me.updateCache(addArr, updateArr, removeIds, rstData);
            me.sortGlj(me.complementaryGljList);
            if(me.currentOprParent === 1){
                me.currentCache = me.getParentCache(me.parentNodeIds["_pNodeId_" + me.gljCurTypeId]);
            }
            else{
                me.currentCache = me.getCache();
            }
            me.showGljItems(me.complementaryGljList, me.gljCurTypeId);
            //getCurrentGlj
            let row = me.workBook.getSheet(0).getSelections()[0].row;
           /* me.currentGlj = row < me.currentCache.length ? me.currentCache[row] : null;
            me.currentComponent = me.currentGlj ?  me.getCurrentComponent(me.currentGlj.component) : [];
            sheetOpr.cleanData(gljComponentOprObj.workBook.getSheet(0), gljComponentOprObj.setting, -1);
            sheetOpr.showData(gljComponentOprObj.workBook.getSheet(0), gljComponentOprObj.setting, me.currentComponent);*/
            me.initSel(row);
        }
        let errCaller = function (err) {
            alert('保存失败');
        };
        CommonAjax.post(url, post, scCaller, errCaller);
    },
    saveInString: function (datas) {
        for(let i = 0, len = datas.length; i < len; i++){
            let data = datas[i];
            if(_exist(data, 'basePrice')){
                data['basePrice'] = data['basePrice'].toString();
            }
            if(_exist(data, 'component')){
                for(let j = 0, jLen = data['component'].length; j < jLen; j++){
                    let comGljObj = data['component'][j];
                    if(_exist(comGljObj, 'consumeAmt')){
                        comGljObj['consumeAmt'] = comGljObj['consumeAmt'].toString();
                    }
                }
            }
        }
        function _exist(data, attr){
            return data && data[attr] !== undefined && data[attr];
        }
    },
    getParentCache: function (nodes) {
        let me = repositoryGljObj, rst = [];
        for(let i = 0; i < me.complementaryGljList.length; i++){
            if(nodes.indexOf(me.complementaryGljList[i].gljClass) !== -1){
                rst.push(me.complementaryGljList[i]);
            }
        }
        rst.sort(function (a, b) {
            let rst = 0;
            if(a.code > b.code) rst = 1;
            else if(a.code < b.code)rst = -1;
            return rst;
        });
        return rst;
    },
    getCache: function() {
        let me = this, rst = [];
        for (let i = 0; i < me.complementaryGljList.length; i++) {
            if (me.complementaryGljList[i].gljClass == me.gljCurTypeId) {
                rst.push(me.complementaryGljList[i]);
            }
        }
        return rst;
    },
    updateCache: function(addArr, updateArr, removeIds, rstData) {
        let me = this, cacheSection = me.complementaryGljList;
        if (addArr.length > 0) {
            me.complementaryGljList = me.complementaryGljList.concat(addArr);
            cacheSection = me.complementaryGljList;
        }
        for (let i = removeIds.length - 1; i >= 0; i--) {
            for (let j = cacheSection.length - 1; j >= 0 ; j--) {
                if (cacheSection[j]["ID"] == removeIds[i]) {
                    cacheSection.splice(j,1);
                }
            }
        }
        if (rstData && rstData.ops && rstData.ops.length > 0) {
            for (let i = 0; i < rstData.ops.length; i++) {
                for (let j = 0; j < cacheSection.length; j++) {
                    if (cacheSection[j][me.setting.header[0].dataCode] == rstData.ops[i][me.setting.header[0].dataCode]) {
                        cacheSection[j]["ID"] = rstData.ops[i]["ID"];
                    }
                }
            }
        }
        for (let i = 0; i < updateArr.length; i++) {
            for (let j = 0; j < cacheSection.length; j++) {
                if (updateArr[i]["ID"] && cacheSection[j]["ID"]) {
                    if (cacheSection[j]["ID"] == updateArr[i]["ID"]) {
                        cacheSection[j] = updateArr[i];
                    }
                } else {
                    if (cacheSection[j][me.setting.header[0].dataCode] == updateArr[i][me.setting.header[0].dataCode]) {
                        cacheSection[j] = updateArr[i];
                    }
                }
            }
        }
        //allgljs
    },
    updateParentNodeIds: function (nodes, caller) {
        let private_build_parentNodeIds = function(pNodeId, nodesArr){
            let rst = [];
            for (let i = 0; i < nodesArr.length; i++) {
                if (nodesArr[i].children.length > 0) {
                    rst = rst.concat(private_build_parentNodeIds(nodesArr[i].data.ID, nodesArr[i].children));
                } else {
                    rst.push(nodesArr[i].data.ID);
                }
            }
            if (pNodeId && rst.length > 0) {
                caller.parentNodeIds["_pNodeId_" + pNodeId] = rst;
            }
            return rst;
        };
        if (caller.parentNodeIds) {
            private_build_parentNodeIds(null, nodes);
        }
    },
    setProp: function (prop, value, gljList) {
        let me = this;
        for(let i = 0, len = gljList.length; i < len; i++){
            gljList[i][prop] = value;
        }
    },
    sortGlj: function(gljList) {
        let me = this;
        gljList.sort(function(a, b){
            let rst = 0;
            if (a.code > b.code) rst = 1
            else if (a.code < b.code) rst = -1;
            return rst;
        });
    }
}

let gljTypeTreeOprObj = {
    onClick: function(event,treeId,treeNode) {
        let me = repositoryGljObj,
            that = gljComponentOprObj,
            gljTypeId = treeNode.ID;
        me.gljCurTypeId = treeNode.ID;
        //消除新增到一半的数据
        me.addGljObj = null;
        //me.currentCache = me.getCache();
        sheetOpr.cleanData(that.workBook.getSheet(0), that.setting, 5);
        if (me.parentNodeIds["_pNodeId_" + treeNode.ID]) {
            me.currentOprParent = 1;
            me.currentCache = me.getParentCache(me.parentNodeIds["_pNodeId_" + treeNode.ID]);
            me.workBook.getSheet(0).setRowCount(me.currentCache.length);
        } else {
            me.currentOprParent = 0;
            me.currentCache = me.getCache();
        }
        me.showGljItems(me.complementaryGljList, gljTypeId);
    }
}