Measure/Forms/ReportsFrm.pas

unit ReportsFrm;

interface

// 导出PDF须定义该编译指令
{$DEFINE cplPrint}
// 导出Excel须定义该编译指令
{$DEFINE cplOutputToExcelRange}

uses
  ProjectData, ScFileArchiver, ReportManager, ConditionalDefines,
  PrintComTypeDefUnit, ADODB, DB, ReportPrepare, ReportConnection,
  AuditSelectFrm,
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, PrintCom, PrintComXML, ExtCtrls, ExTreeView, ImgList,
  dxBarExtItems, dxBar, ComCtrls, ToolWin, StdCtrls, Jpeg;

type
  TReportsForm = class(TForm)
    xmReports: TdxBarManager;
    xlbPrint: TdxBarLargeButton;
    xlbToExcel: TdxBarLargeButton;
    xlbToPDF: TdxBarLargeButton;
    xlbRealSize: TdxBarLargeButton;
    xlbOnePage: TdxBarLargeButton;
    xlbTwoPage: TdxBarLargeButton;
    xlbFourPage: TdxBarLargeButton;
    xcbPages: TdxBarCombo;
    xlbFirstPage: TdxBarLargeButton;
    xlbPrePage: TdxBarLargeButton;
    xlbNextPage: TdxBarLargeButton;
    xlbLastPage: TdxBarLargeButton;
    xcbStartPage: TdxBarCombo;
    xcbEndPage: TdxBarCombo;
    xlbSetup: TdxBarLargeButton;
    xlbClose: TdxBarLargeButton;
    xlbPrintCurPage: TdxBarLargeButton;
    dxcciSafePrint: TdxBarControlContainerItem;
    ilstLarge: TImageList;
    pnlReportsList: TPanel;
    extvReport: TExTreeView;
    sprReportPreview: TSplitter;
    sbReportsPreview: TScrollBox;
    PreviewBox: TImage;
    PreviewComXML: TPrintComXML;
    ilstTree: TImageList;
    pnlTopButton: TPanel;
    tobaTemplateManager: TToolBar;
    tbImportSrt: TToolButton;
    tbExportSrt: TToolButton;
    tbDeleteSrt: TToolButton;
    ilstTemplateContorl: TImageList;
    pnlPaperSize: TPanel;
    rdbtnA3: TRadioButton;
    rdbtnA4: TRadioButton;
    chkFillZero: TCheckBox;
    dxcciPageSize: TdxBarControlContainerItem;
    pnlExcelMode: TPanel;
    chkExcelMode: TCheckBox;
    chkExcel2010: TCheckBox;
    dxcciExcelMode: TdxBarControlContainerItem;
    pnlReports: TPanel;
    BatchPrintXml: TPrintComXML;
    btnRMgr: TToolButton;
    pnlSearch: TPanel;
    imgSearch: TImage;
    edtSearch: TEdit;
    procedure PreviewComXMLGetDataConnection(var ADOCon: TADOConnection);
    procedure xlbRealSizeClick(Sender: TObject);
    procedure xlbOnePageClick(Sender: TObject);
    procedure xlbTwoPageClick(Sender: TObject);
    procedure xlbFourPageClick(Sender: TObject);
    procedure xlbFirstPageClick(Sender: TObject);
    procedure xlbPrePageClick(Sender: TObject);
    procedure xlbNextPageClick(Sender: TObject);
    procedure xlbLastPageClick(Sender: TObject);
    procedure xcbPagesChange(Sender: TObject);
    procedure xlbPrintCurPageClick(Sender: TObject);
    procedure xcbStartPageChange(Sender: TObject);
    procedure xlbPrintClick(Sender: TObject);
    procedure xlbToPDFClick(Sender: TObject);
    procedure xlbToExcelClick(Sender: TObject);
    procedure extvReportClick(Sender: TObject);
    procedure xlbCloseClick(Sender: TObject);
    procedure tbImportSrtClick(Sender: TObject);
    procedure tbDeleteSrtClick(Sender: TObject);
    procedure tbExportSrtClick(Sender: TObject);
    procedure PreviewComXMLContentDisplay(var contentFontRec: TFontRec;
      dataType: Integer; isReading: Boolean; DrawType: Integer;
      isPrinting: Boolean);
    procedure xlbSetupClick(Sender: TObject);
    procedure PreviewComXMLCrossTabLabelShow(valIDX: Integer; var ExLeft,
      ExRight: Double; var isShow: Boolean; CrsTabShowType: Integer);
    procedure rdbtnA4Click(Sender: TObject);
    procedure chkFillZeroClick(Sender: TObject);
    procedure PreviewComXMLGetDatasetEvent(DatasetInfo: PDatasetInfoRec;
      var ADataset: TDataSet);
    procedure btnRMgrClick(Sender: TObject);
    procedure FormActivate(Sender: TObject);
    procedure imgSearchClick(Sender: TObject);
    procedure extvReportKeyDown(Sender: TObject; var Key: Word;
      Shift: TShiftState);
  private
    FProjectData: TProjectData;
    FCurPage: Integer;
    FiPageGroup: Integer;
    FiCenterPerPage: Integer;
    FbNormal : Boolean;
    FDisplayCount: Integer;

    FLockForm: Boolean;

    // 数据库管理
    FReportCon: TReportConnection;
    // 报表数据准备
    FReportDataPrepare: TReportPrepare;

    procedure InitPageSettings(APrintCom: TPrintComXML);
    procedure InitFont(APrintCom: TPrintComXML);
    procedure InitPaperSettings(ATemplate: TTemplateNode; APrintCom: TPrintComXML);

    function GetHintStr: string;

    function AddClassNode(AParent: TExTreeNode; const AName: string): TExTreeNode;
    function GetClassNode(ANode: TTemplateNode): TExTreeNode;
    function GetSubClassNode(AClassNode: TExTreeNode; ANode: TTemplateNode): TExTreeNode;
    procedure AddReportTemplate(ANode: TTemplateNode);
  	procedure LoadReportTemplets;

    procedure SaveAuditOpinion(ATemplate: TTemplateNode);
    procedure SaveReportInteractData(ATemplate: TTemplateNode);

    procedure ResizePreviewBox;
    procedure PreviewReportCurPage;
    procedure RepaintCurPagePreview;
    procedure LoadTemplet(ATemplate: TTemplateNode; APrintCom: TPrintComXML);
    procedure LoadTempletAndDisplay;

    procedure BeforeExport;
    procedure AfterExport;

    procedure LoadExcelBorder(var Border : TColumnLineRec);
    procedure PrintReport(ATemplateNode: TTemplateNode; isPDF, isExcel: boolean;
      ExcelOutputName, TemplateFileName: string);

    procedure ExportXlsReport(AStartPage, AEndPage: Integer; const AFileName: string; APrintCom: TPrintComXML);
    procedure ExportCurXlsReport;
    procedure ExportAllSelectedXlsReports;
    procedure PrintAllSelectedReports;
    procedure ExportAllSelectedPDFReports;

    procedure ExportReportPage(APage: Integer; const APageFileName: string; AOrg: Boolean);

    procedure SetProjectData(const Value: TProjectData);
    procedure SetCurPage(const Value: Integer);
    function GetPrintEndPage: Integer;
    function GetPrintStartPage: Integer;
    function GetPageCount: Integer;
    function GetPrecededCount: Integer;
    function GetExcelMode: TOutputExcelMode;
    function GetIsExcel2010: Boolean;
  public
    destructor Destroy; override;
    procedure RefreshReportTemplets;
    procedure InitFormView;
    procedure InitReportSettings(APrintCom: TPrintComXML; ATemplate: TTemplateNode = nil);

    property ProjectData: TProjectData read FProjectData write SetProjectData;
    // 当前预览的页码
    property CurPage: Integer read FCurPage write SetCurPage;
    // 显示几页
    property DisplayCount: Integer read FDisplayCount write FDisplayCount;
    // 翻到的页数（例如：当前显示9页，显示4页，则翻到的页数为3）
    property PrecededCount: Integer read GetPrecededCount;
    property PrintStartPage: Integer read GetPrintStartPage;
    property PrintEndPage: Integer read GetPrintEndPage;
    property PageCount: Integer read GetPageCount;
    property ExcelMode: TOutputExcelMode read GetExcelMode;
    property IsExcel2010: Boolean read GetIsExcel2010;

    property LockForm: Boolean read FLockForm write FLockForm;
  end;

  procedure DisplayReportsForm(AProjectData: TProjectData);

implementation

uses
  UtilMethods, Math, Globals, ZhAPI, ReportAdjustFrm,
  Contnrs, mEncryptUnit, Printers, WinSpool, MainFrm, ConstUnit,
  GclBillsGatherModel, ReportPdfHelper, ReportManagerFrm, ReportManagerDM;

{$R *.dfm}

procedure DisplayReportsForm(AProjectData: TProjectData);
var
  ReportsForm: TReportsForm;

begin
  ReportsForm := TReportsForm.Create(nil);
  {ReportsForm.BorderIcons := ReportsForm.BorderIcons - [biMaximize];
  ReportsForm.WindowState := wsMaximized;}
  ReportsForm.ProjectData := AProjectData;
  ReportsForm.InitReportSettings(ReportsForm.PreviewComXML);
  ReportsForm.InitFormView;
  try
    if not _IsDebugView then
      ReportsForm.extvReport.OnKeyDown := nil;
    ReportsForm.ShowModal;
  finally
    ReportsForm.Free;
    if not _IsDebugView then
      AProjectData.ClearReportCacheData;
  end;
end;

{ TReportsForm }

procedure TReportsForm.LoadReportTemplets;
var
  iTemplate: Integer;
  TemplateNode: TTemplateNode;
  ClassNode: TExTreeNode;
begin
  extvReport.Items.Clear;
  for iTemplate := 0 to ReportTemplateManager.Count - 1 do
  begin
    TemplateNode := ReportTemplateManager.Template[iTemplate];
    AddReportTemplate(TemplateNode);
  end;
  extvReport.AlphaSort;

  // 强制展开全部节点
  // 某些情况下，创建节点处的展开方法失效
  ClassNode := extvReport.Items.GetFirstNode;
  while Assigned(ClassNode) do
  begin
    ClassNode.ForcedExpand(True);
    ClassNode := ClassNode.getNextSibling;
  end;

  extvReport.Selected := extvReport.Items.GetFirstNode;
end;

procedure TReportsForm.LoadTempletAndDisplay;

  procedure ResetReportsVariant;
  var
    iPage: Integer;
  begin
    FbNormal := False;
    xcbPages.Items.Clear;
    for iPage := 1 to PreviewComXML.TotalPages do
      xcbPages.Items.Add(IntToStr(iPage));
    xcbStartPage.Items.Assign(xcbPages.Items);
    xcbStartPage.ItemIndex := 0;
    xcbEndPage.Items.Assign(xcbPages.Items);
    xcbEndPage.ItemIndex := xcbEndPage.Items.Count - 1;
    xlbRealSize.Down := True;
    DisplayCount := 1;
    CurPage := 1;
  end;

  procedure WaringAndEmptyPreview(AStr: string);
  var
    OldBrushColor, OldPenColor: TColor;
  begin
    TipMessage(AStr, Handle);
    OldBrushColor := PreviewBox.Canvas.Brush.Color;
    OldPenColor := PreviewBox.Canvas.Pen.Color;
    try
      PreviewBox.Canvas.Brush.Color := clBtnFace;
      PreviewBox.Canvas.Pen.Color := clBlack;
      PreviewBox.Canvas.Rectangle(PreviewBox.BoundsRect);
    finally
      PreviewBox.Canvas.Brush.Color := OldBrushColor;
      PreviewBox.Canvas.Pen.Color := OldPenColor;
    end;
  end;

  procedure PreviewTemplet;
  begin
    try
      ResizePreviewBox;
      ResetReportsVariant;
    except
      WaringAndEmptyPreview('当前报表显示可能存在问题,请与纵横客服中心联系：(0756)3850888。');
    end;
  end;

  procedure LoadEmptyTempletAndDisplay;
  begin
    WaringAndEmptyPreview('报表无数据,请选择其他报表。');
  end;

var
  vTemplateNode: TTemplateNode;
  pNode: PTemplateNode;
begin
  if not Assigned(extvReport.Selected) then Exit;
  vTemplateNode := TTemplateNode(extvReport.Selected.Data);
  if not Assigned(vTemplateNode) then Exit;

  ReportTemplateManager.Current := vTemplateNode;

  // 交互表
  if vTemplateNode.InteractFlag <> 0 then
    SaveReportInteractData(vTemplateNode);
  // 准备额外数据
  if vTemplateNode.DataPrepareFlag <> 0 then
    FReportDataPrepare.PrepareData(vTemplateNode.DataPrepareFlag);
  FReportCon.RefreshConnection(vTemplateNode);

  Screen.Cursor := crHourGlass;
  try
    LoadTemplet(vTemplateNode, PreviewComXML);
    if PreviewComXML.TotalPages > 0 then
      PreviewTemplet
    else
      LoadEmptyTempletAndDisplay;
  finally
    Screen.Cursor := crDefault;
  end;
end;

procedure TReportsForm.SetProjectData(const Value: TProjectData);
begin
  FProjectData := Value;
  FReportDataPrepare := TReportPrepare.Create(FProjectData);
  FReportCon := TReportConnection.Create(FProjectData);
  extvReport.Selected := extvReport.Items[0];
  LoadReportTemplets;
  LoadTempletAndDisplay;
end;

procedure TReportsForm.PreviewComXMLGetDataConnection(
  var ADOCon: TADOConnection);
begin
  ADOCon := FReportCon.Connection;
end;

procedure TReportsForm.PreviewReportCurPage;
begin
  if FbNormal then
    PreviewComXML.PrintPreviewCanvas(-1, PrecededCount, PreviewBox.Canvas, True)
  else //强制1:1显示
    PreviewComXML.PrintPreviewCanvas(CurPage, 0, PreviewBox.Canvas, True);
end;

procedure TReportsForm.ResizePreviewBox;
var
  iHeight, iWidth: Integer;
begin
  if FbNormal then
  begin
    iHeight := sbReportsPreview.ClientHeight;
    iWidth := sbReportsPreview.ClientWidth;
  end
  else
  begin
    iHeight := Max(PreviewComXML.PrintHeight + 20, sbReportsPreview.ClientHeight);
    iWidth := Max(PreviewComXML.PrintWidth + 20, sbReportsPreview.ClientWidth);
  end;
  if PreviewBox.Height <> iHeight then
  begin
    PreviewBox.Height := iHeight;
    PreviewBox.Picture.Bitmap.Height := iHeight;
  end;
  if PreviewBox.Width <> iWidth then
  begin
    PreviewBox.Width := iWidth;
    PreviewBox.Picture.Bitmap.Width := iWidth;
  end;
end;

procedure TReportsForm.RepaintCurPagePreview;
begin
  ResizePreviewBox;
  PreviewReportCurPage;
end;

procedure TReportsForm.xlbRealSizeClick(Sender: TObject);
begin
  FbNormal := False;
  DisplayCount := TdxBarLargeButton(Sender).Tag;
  RepaintCurPagePreview;
end;

procedure TReportsForm.xlbOnePageClick(Sender: TObject);
begin
  PreviewComXML.PreviewRows := 1;
  PreviewComXML.PreviewCols := 1;
  DisplayCount := TdxBarLargeButton(Sender).Tag;
  FbNormal := True;
  RepaintCurPagePreview;
end;

procedure TReportsForm.xlbTwoPageClick(Sender: TObject);
begin
  if PreviewComXML.ReportSize.X > PreviewComXML.ReportSize.Y then
  begin
    PreviewComXML.PreviewRows := 2;
    PreviewComXML.PreviewCols := 1;
  end
  else
  begin
    PreviewComXML.PreviewRows := 1;
    PreviewComXML.PreviewCols := 2;
  end;
  DisplayCount := TdxBarLargeButton(Sender).Tag;
  FbNormal := true;
  RepaintCurPagePreview;
end;

procedure TReportsForm.xlbFourPageClick(Sender: TObject);
begin
  PreviewComXML.PreviewRows := 2;
  PreviewComXML.PreviewCols := 2;
  DisplayCount := TdxBarLargeButton(Sender).Tag;
  FbNormal := true;
  RepaintCurPagePreview;
end;

procedure TReportsForm.xlbFirstPageClick(Sender: TObject);
begin
  CurPage := 1;
end;

procedure TReportsForm.SetCurPage(const Value: Integer);
begin
  if (Value < 0) or (Value > PageCount) then Exit;
  FCurPage := Value;
  xcbPages.Text := IntToStr(FCurPage);
  //PreviewComXML.FillZero := chkFillZero.Checked;
  PreviewReportCurPage;
end;

function TReportsForm.GetPrintEndPage: Integer;
begin
  Result := StrToIntDef(xcbEndPage.Text, 0);
end;

function TReportsForm.GetPrintStartPage: Integer;
begin
  Result := StrToIntDef(xcbStartPage.Text, 0);
end;

function TReportsForm.GetPageCount: Integer;
begin
  Result := PreviewComXML.TotalPages;
end;

function TReportsForm.GetPrecededCount: Integer;
begin
  Result := (CurPage + (DisplayCount - 1)) div DisplayCount;
end;

procedure TReportsForm.xlbPrePageClick(Sender: TObject);
begin
  if CurPage > 1 then
    CurPage := CurPage - 1;
end;

procedure TReportsForm.xlbNextPageClick(Sender: TObject);
begin
  if CurPage < PageCount then
    CurPage := CurPage + 1;
end;

procedure TReportsForm.xlbLastPageClick(Sender: TObject);
begin
  CurPage := PageCount;
end;

procedure TReportsForm.xcbPagesChange(Sender: TObject);
begin
  if (StrToIntDef(xcbPages.Text, 0) > 0) and
      (StrToIntDef(xcbPages.Text, 0) <= PageCount) then
    CurPage := StrToIntDef(xcbPages.Text, 0)
  else
    xcbPages.Text := IntToStr(CurPage);
end;

procedure TReportsForm.xlbPrintCurPageClick(Sender: TObject);
var
  img: TJPEGImage;
begin
  if _IsEncrypt or G_IsCloud then
    PreviewComXML.Print(PreviewBox.Canvas, CurPage, 1)
  else
    TipMessage(GetHintStr, Handle);
  //PreviewBox.Picture.SaveToFile('E:\Org.bmp');
  //ExportReportPage(1, 'E:\Org.jpg', True);
  //ExportReportPage(1, 'E:\Cut.jpg', False);
end;

procedure TReportsForm.xcbStartPageChange(Sender: TObject);
begin
  if (StrToIntDef(TdxBarCombo(Sender).Text, 0) > 0) and
      (StrToIntDef(TdxBarCombo(Sender).Text, 0) <= PageCount) then
    TdxBarCombo(Sender).Tag := StrToIntDef(TdxBarCombo(Sender).Text, 0)
  else
    TdxBarCombo(Sender).Text := IntToStr(TdxBarCombo(Sender).Tag);
end;

procedure TReportsForm.xlbPrintClick(Sender: TObject);
begin
  if _IsEncrypt or G_IsCloud then
  begin
    if extvReport.LeafCheckedCount > 0 then
      PrintAllSelectedReports
    else
      PreviewComXML.PrintMultiPages(PreviewBox.Canvas, PrintStartPage, PrintEndPage);
  end
  else
    TipMessage(GetHintStr, Handle);
end;

procedure TReportsForm.PrintAllSelectedReports;
var
  iIndex: Integer;
  Node: TExTreeNode;
  vTemplateNode: TTemplateNode;
begin
  for iIndex := 0 to extvReport.Items.Count - 1 do
  begin
    Node := extvReport.Items[iIndex];
    if Node.HasChildren or (Node.Checked <> csChecked) or (Node.Data = nil) then Continue;
    vTemplateNode := TTemplateNode(Node.Data);
    if FileExists(vTemplateNode.FileName) then
      PrintReport(vTemplateNode, False, False, '', '');
  end;
  extvReport.ClearChecked;
end;

procedure TReportsForm.xlbToPDFClick(Sender: TObject);
var
  sFileName: string;
begin
  if _IsEncrypt or G_IsCloud then
  begin
    if extvReport.LeafCheckedCount > 0 then
      ExportAllSelectedPDFReports
    else
    begin
      sFileName := PreviewComXML.ReportName + '.pdf';
      if SaveFile(sFileName, '.pdf') then
        PdfHelper.ExportPages(PreviewComXML, sFileName, PrintStartPage, PrintEndPage);
    end;
  end
  else
    TipMessage(GetHintStr, Handle);
end;

procedure TReportsForm.ExportAllSelectedPDFReports;
var
  iIndex: Integer;
  Node: TExTreeNode;
  vTemplateNode: TTemplateNode;
begin
  for iIndex := 0 to extvReport.Items.Count - 1 do
  begin
    Node := extvReport.Items[iIndex];
    if Node.HasChildren or (Node.Checked <> csChecked) or (Node.Data = nil) then Continue;
    vTemplateNode := TTemplateNode(Node.Data);
    if FileExists(vTemplateNode.FileName) then
      PrintReport(vTemplateNode, True, False,'','');
  end;
  extvReport.ClearChecked;
end;

procedure TReportsForm.xlbToExcelClick(Sender: TObject);
begin
  if _IsEncrypt or G_IsCloud then
  begin
    if extvReport.LeafCheckedCount > 0 then
      ExportAllSelectedXlsReports
    else
      ExportCurXlsReport;
  end
  else
    TipMessage(GetHintStr, Handle);
end;

procedure TReportsForm.ExportAllSelectedXlsReports;
var
  iIndex: Integer;
  Node: TExTreeNode;
  vTemplateNode: TTemplateNode;
  sPath, sOutputFileName: String;
begin
  if BrowseFolder(sPath, '请选择导出报表路径', Handle) then
  begin
    for iIndex := 0 to extvReport.Items.Count - 1 do
    begin
      Node := extvReport.Items[iIndex];
      if Node.HasChildren or (Node.Checked <> csChecked) or (Node.Data = nil) then Continue;
      vTemplateNode := TTemplateNode(Node.Data);
      if IsExcel2010 then
        sOutputFileName := sPath + ExtractSimpleFileName(vTemplateNode.FileName) + '.xlsx'
      else
        sOutputFileName := sPath + ExtractSimpleFileName(vTemplateNode.FileName) + '.xls';
      if FileExists(vTemplateNode.FileName) then
        PrintReport(vTemplateNode, False, True, sOutputFileName, GetTemplateXlsFileName);
    end;
    extvReport.ClearChecked;
  end;
end;

procedure TReportsForm.ExportCurXlsReport;
var
  sFileName: string;
begin
  sFileName := extvReport.Selected.Text;
  if IsExcel2010 then
  begin
    if (PrintStartPage <= PrintEndPage) and SaveFile(sFileName, '.xlsx') then
      ExportXlsReport(PrintStartPage, PrintEndPage, sFileName, PreviewComXML);
  end
  else
  begin
    if (PrintStartPage <= PrintEndPage) and SaveFile(sFileName, '.xls') then
      ExportXlsReport(PrintStartPage, PrintEndPage, sFileName, PreviewComXML);
  end;
end;

procedure TReportsForm.AfterExport;
begin
  // ToDo - 关闭进度条
  // ToDo - 取消设置Update进度条事件
  // PreviewComXML.OnProgress := nil;
  Screen.Cursor := crDefault;
end;

procedure TReportsForm.BeforeExport;
begin
  Screen.Cursor := crHourGlass;
  // ToDo - 设置Update进度条事件
  // PreviewComXML.OnProgress := PreviewComXMLProgress;
  // ToDo - 打开进度条
end;

function TReportsForm.GetExcelMode: TOutputExcelMode;
begin
  if chkExcelMode.Checked then
    Result := oemOneSheet
  else
    Result := oemNormal;
end;

procedure TReportsForm.extvReportClick(Sender: TObject);
begin
  LoadTempletAndDisplay;
end;

procedure TReportsForm.xlbCloseClick(Sender: TObject);
begin
  Close;
end;

procedure TReportsForm.AddReportTemplate(ANode: TTemplateNode);
var
  vClassNode, vNode: TExTreeNode;
begin
  vClassNode := GetClassNode(ANode);
  if ANode.SubClassNum <> '' then
    vClassNode := GetSubClassNode(vClassNode, ANode);
  vNode := extvReport.Items.AddChildObject(vClassNode, ANode.TemplateName, Pointer(ANode));
  vNode.ImageIndex := 2;
  vNode.SelectedIndex := 3;
  vNode.Checked := csUnchecked;
  if (vClassNode <> nil) and not vClassNode.Expanded then
    vClassNode.Expanded := True;
end;

function TReportsForm.GetClassNode(ANode: TTemplateNode): TExTreeNode;

  function FindClassNode(const AName: string): TExTreeNode;
  var
    I: Integer;
    vNode: TExTreeNode;
  begin
    Result := nil;
    for I := 0 to extvReport.Items.Count - 1 do
    begin
      vNode := extvReport.Items.Item[I];
      if SameText(vNode.Text, AName) then
      begin
        Result := vNode;
        Break;
      end;
    end;
  end;

begin
  Result := FindClassNode(ANode.ClassNum + '.' + ANode.ClassName);
  if not Assigned(Result) then
    Result := AddClassNode(nil, ANode.ClassNum + '.' + ANode.ClassName);
end;

procedure TReportsForm.tbImportSrtClick(Sender: TObject);

  procedure ImportReportTemplate(const AFileName: string);
  var
    sNewFileName: string;
    vTemplateNode: TTemplateNode;
  begin
    sNewFileName := GetReportTemplatePath + ExtractFileName(AFileName);
    if not FileExists(sNewFileName) then
    begin
      CopyFileOrFolder(AFileName, sNewFileName);
      vTemplateNode := ReportTemplateManager.AddReportTemplate(sNewFileName);
      AddReportTemplate(vTemplateNode);
    end
    else
      if QuestMessage('已存在报表模板' + ExtractFileName(AFileName) + ',是否覆盖原模板?', Handle) then
      begin
        CopyFileOrFolder(AFileName, sNewFileName);
        vTemplateNode := ReportTemplateManager.FindTemplate(sNewFileName);
        if Assigned(vTemplateNode) then
          vTemplateNode.RefreshTemplateProperties;
      end
      else
        Exit;
  end;

var
  sgsFiles: TStrings;
  iFile: Integer;
begin
  sgsFiles := TStringList.Create;
  try
    if SelectFiles(sgsFiles, '.srt') then
    begin
      for iFile := 0 to sgsFiles.Count - 1 do
        ImportReportTemplate(sgsFiles.Strings[iFile]);
    end;
  finally
    sgsFiles.Free;
  end;
end;

procedure TReportsForm.tbDeleteSrtClick(Sender: TObject);
var
  vTemplateNode: TTemplateNode;
begin
  if not Assigned(extvReport.Selected) then Exit;
  vTemplateNode := TTemplateNode(extvReport.Selected.Data);
  if not Assigned(vTemplateNode) then Exit;
  extvReport.Items.Delete(extvReport.Selected);
  DeleteFile(vTemplateNode.FileName);
  ReportTemplateManager.DeleteReportTemplate(vTemplateNode);
  LoadTempletAndDisplay;
end;

procedure TReportsForm.tbExportSrtClick(Sender: TObject);
var
  vTemplateNode: TTemplateNode;
  sFileName: string;
begin
  if not Assigned(extvReport.Selected) then Exit;
  vTemplateNode := TTemplateNode(extvReport.Selected.Data);
  if not Assigned(vTemplateNode) then Exit;
  sFileName := vTemplateNode.TemplateName;
  if SaveFile(sFileName, '.srt') then
  begin
    if not FileExists(sFileName) or QuestMessage('存在同名文件，是否覆盖？', Handle) then
      CopyFileOrFolder(vTemplateNode.FileName, sFileName);
  end;
end;

procedure TReportsForm.PreviewComXMLContentDisplay(
  var contentFontRec: TFontRec; dataType: Integer; isReading: Boolean;
  DrawType: Integer; isPrinting: Boolean);
begin
  if ReportConfig.ContentIsNarrow then
  begin
    if (isReading) then
    begin
      begin
        contentFontRec.FontName := 'Arial Narrow';
        contentFontRec.FontHeight := Round(ReportConfig.ContentFont.Size*4/3) * 4 div 3;
      end;
    end else
    begin
      if (DrawType = DRAW_TYPE_EXCEL_XML) or (DrawType = DRAW_TYPE_EXCEL) or (DrawType = DRAW_TYPE_EXCEL_OE) then
      begin
        if (dataType <> DATA_TYPE_DOUBLE) and (dataType <> DATA_TYPE_FLOAT) then
        begin
          contentFontRec.FontName := ReportConfig.ContentFont.Name;
        end;
        contentFontRec.FontHeight := Round(ReportConfig.ContentFont.Size*4/3);
      end else if (isPrinting) then
      begin
        if (dataType = DATA_TYPE_DOUBLE) or (dataType = DATA_TYPE_FLOAT) then
        begin
          contentFontRec.FontName := 'Arial Narrow';
          contentFontRec.FontHeight := Round(ReportConfig.ContentFont.Size*4/3) * 7 div 6;
        end else
        begin
          contentFontRec.FontName := ReportConfig.ContentFont.Name;
          contentFontRec.FontHeight := Round(ReportConfig.ContentFont.Size*4/3);
        end;
      end else
      begin
        if (dataType = DATA_TYPE_DOUBLE) or (dataType = DATA_TYPE_FLOAT) then
        begin
          contentFontRec.FontName := 'Arial Narrow';
          contentFontRec.FontHeight := Round(ReportConfig.ContentFont.Size*4/3) * 4 div 3;
        end else
        begin
          contentFontRec.FontName := ReportConfig.ContentFont.Name;
          contentFontRec.FontHeight := Round(ReportConfig.ContentFont.Size*4/3);
        end;
      end;
    end;
  end;
end;

procedure TReportsForm.xlbSetupClick(Sender: TObject);
begin
  if AdjustReport then
    LoadTempletAndDisplay;
end;

procedure TReportsForm.InitReportSettings(APrintCom: TPrintComXML; ATemplate: TTemplateNode);
begin
  APrintCom.FillZero := chkFillZero.Checked;
  InitPageSettings(APrintCom);
  InitPaperSettings(ATemplate, APrintCom);

  {APrintCom.ShowBackgroundMark := FProjectData.ProjProperties.ShowReportShading;
  APrintCom.BackgroundMarkStr := FProjectData.ProjProperties.ReportShading;}
  if FProjectData.ProjProperties.ReportShowState then
  begin
    if FProjectData.ProjProperties.ReportShowStateWithoutReply and
        ((FProjectData.ProjProperties.AuditStatus = -1) or (FProjectData.PhaseIndex < FProjectData.ProjProperties.PhaseCount)) then
      APrintCom.ShowBackgroundMark := False
    else
      APrintCom.ShowBackgroundMark := True;
  end
  else
    APrintCom.ShowBackgroundMark := False;
  APrintCom.BackgroundMarkStr := FProjectData.ProjProperties.ReportShowStateText;
end;

procedure TReportsForm.InitPageSettings(APrintCom: TPrintComXML);
begin
  // 设置页面大小
  APrintCom.setPageSize(ReportConfig.PageSize);
  if ReportConfig.PageSize = 'A3' then
    APrintCom.PrintPageSizeIdx := DMPAPER_A3
  else if ReportConfig.PageSize = 'A4' then
    APrintCom.PrintPageSizeIdx := DMPAPER_A4;
  // 设置边距
  APrintCom.setEdge(0, '', ReportConfig.LeftEdge/10);
  APrintCom.setEdge(1, '', ReportConfig.RightEdge/10);
  APrintCom.setEdge(2, '', ReportConfig.UpEdge/10);
  APrintCom.setEdge(3, '', ReportConfig.DownEdge/10);
end;

procedure TReportsForm.InitPaperSettings(ATemplate: TTemplateNode; APrintCom: TPrintComXML);

  procedure InitRepBorderLine;
  var
    i: Integer;
    ObjList : TList;
    ShapeRec : PPicRec;
  begin
    ObjList := TList.Create;
    try
      APrintCom.getAllShapeObjs(1, ObjList);
      for i := 0 to ObjList.Count - 1 do
      begin
        ShapeRec := ObjList[i];
        // 设置报表边框线粗
        ShapeRec.PenWidth := ReportConfig.BorderLine;
        // 设置是否绘制报表边框横线
        if (ShapeRec.ExArea.ExLeft <> ShapeRec.ExArea.ExRight) then
        begin
          if not ReportConfig.RepBorderUnderLine then
            ShapeRec.PenStyle := integer(psClear)
          else
            ShapeRec.PenStyle := integer(psSolid);
        end;
        // 设置是否绘制报表边框竖线
        if (ShapeRec.ExArea.ExTop <> ShapeRec.ExArea.ExBottom) and
           ((ShapeRec.ExArea.ExLeft = 0) or (ShapeRec.ExArea.ExLeft = 100)) then
        begin //这里的判断条件是约定好的
          if not ReportConfig.RepBorderVerLine then
             ShapeRec.PenStyle := integer(psClear)
          else
             ShapeRec.PenStyle := integer(psSolid)
        end;
        APrintCom.setShapeObj(ShapeRec);
      end;
    finally
      ObjList.Free;
    end;
  end;

  procedure InitRepCellLine;
  var
    i: Integer;
    ObjList : TList;
    ColumnRec : PColumnRec;
    FlowContentRec : PContentRec;
    CrossContentRec : PCrossContentRec;
  begin
    ObjList := TList.Create;
    try
      APrintCom.getAllFlowShowContentObjs(ObjList);
      // 设置报表表格横线
      for i := 0 to ObjList.Count - 1 do
      begin
        FlowContentRec := ObjList[i];
        FlowContentRec.LineInfo.TopThick := ReportConfig.CellHorLineWidth;
        FlowContentRec.LineInfo.BottomThick := ReportConfig.CellHorLineWidth;
        APrintCom.setFlowContentObj(FlowContentRec);
      end;
      APrintCom.getAllCrossContentObjs(ObjList);
      for i := 0 to ObjList.Count - 1 do
      begin
        CrossContentRec := ObjList[i];
        CrossContentRec.CrossContent.LineInfo.TopThick := ReportConfig.CellHorLineWidth;
        CrossContentRec.CrossContent.LineInfo.BottomThick := ReportConfig.CellHorLineWidth;
        APrintCom.setCrossContentObj(CrossContentRec);
      end;
      // 设置报表表格竖线
      APrintCom.getAllFlowShowContentObjs(ObjList);
      for i := 0 to ObjList.Count - 1 do
      begin
        FlowContentRec := ObjList[i];
        FlowContentRec.LineInfo.LeftThick := ReportConfig.CellVerLineWidth;
        FlowContentRec.LineInfo.RightThick := ReportConfig.CellVerLineWidth;
        // 如果设置无表格边框线，则两端的表格竖线线粗为0
        if (not ReportConfig.RepBorderVerLine) then
          if (i = 0) then
            FlowContentRec.LineInfo.LeftThick := 0
          else if (i = ObjList.Count - 1) then
            FlowContentRec.LineInfo.RightThick := 0;
        APrintCom.setFlowContentObj(FlowContentRec);
      end;

      APrintCom.getAllCrossContentObjs(ObjList);
      for i := 0 to ObjList.Count - 1 do
      begin
        CrossContentRec := ObjList[i];
        CrossContentRec.CrossContent.LineInfo.LeftThick := ReportConfig.CellVerLineWidth;
        CrossContentRec.CrossContent.LineInfo.RightThick := ReportConfig.CellVerLineWidth;
        ColumnRec := CrossContentRec.CrossContent.Column;
        //这里还要判断如果没有边框竖线的情况下,表格竖线边缘的线粗也为0
        //前提是所属表栏最右位置位于边缘
        if (not ReportConfig.RepBorderVerLine) and (ColumnRec<>nil) and
            ((ColumnRec.ExArea.ExRight = 100.0) or (ColumnRec.ExArea.ExLeft = 0.0)) then
        begin
          case CrossContentRec.CrossType of
            0 : //交叉行
            begin
              if (CrossContentRec.CrossContent.ExArea.ExLeft = ColumnRec.ExArea.ExLeft ) then
                  CrossContentRec.CrossContent.LineInfo.LeftThick := 0;
              if (CrossContentRec.CrossContent.ExArea.ExRight = ColumnRec.ExArea.ExRight ) then
                  CrossContentRec.CrossContent.LineInfo.RightThick := 0;
            end;
            1 : //交叉列
            begin
              if (CrossContentRec.CrossContent.ExArea.ExLeft = ColumnRec.ExArea.ExLeft ) then
                  CrossContentRec.CrossContent.LineInfo.LeftThick := 0;
              if (CrossContentRec.CrossContent.ExArea.ExRight = ColumnRec.ExArea.ExRight ) then
                  CrossContentRec.CrossContent.LineInfo.RightThick := 0;
              //(*
              if (CrossContentRec.CrossContent.isSpecialBorder) then
              begin
                if (CrossContentRec.CrossContent.ExArea.ExRight = ColumnRec.ExArea.ExRight ) then
                    CrossContentRec.CrossContent.SpecialLineInfo.RightThick := 0;
              end;
              //*)
            end;
            2 : //显示数据
            begin
              if (CrossContentRec.CrossContent.ExArea.ExLeft = ColumnRec.ExArea.ExLeft ) then
                  CrossContentRec.CrossContent.LineInfo.LeftThick := 0;
              if (CrossContentRec.CrossContent.ExArea.ExRight = ColumnRec.ExArea.ExRight ) then
                  CrossContentRec.CrossContent.LineInfo.RightThick := 0;
            end;
            3 : //固定LABEL
            begin
              if (CrossContentRec.CrossContent.ExArea.ExLeft = ColumnRec.ExArea.ExLeft ) then
                  CrossContentRec.CrossContent.LineInfo.LeftThick := 0;
              if (CrossContentRec.CrossContent.ExArea.ExRight = ColumnRec.ExArea.ExRight ) then
                  CrossContentRec.CrossContent.LineInfo.RightThick := 0;
            end;
            4 : //序号
            begin
              if (CrossContentRec.CrossContent.ExArea.ExLeft = ColumnRec.ExArea.ExLeft ) then
                  CrossContentRec.CrossContent.LineInfo.LeftThick := 0;
              if (CrossContentRec.CrossContent.ExArea.ExRight = ColumnRec.ExArea.ExRight ) then
                  CrossContentRec.CrossContent.LineInfo.RightThick := 0;
            end;
            5 : //横向统计
            begin
              if (CrossContentRec.CrossContent.ExArea.ExLeft = ColumnRec.ExArea.ExLeft ) then
                  CrossContentRec.CrossContent.LineInfo.LeftThick := 0;
              if (CrossContentRec.CrossContent.ExArea.ExRight = ColumnRec.ExArea.ExRight ) then
                  CrossContentRec.CrossContent.LineInfo.RightThick := 0;
            end;
          end;
        end;
        APrintCom.setCrossContentObj(CrossContentRec);
      end;
    finally
      ObjList.Free;
    end;
  end;

  procedure InitOtherArea;

    procedure SetPTRBorder(PTR : PTextRec);

      procedure SetLeftRightBorder;
      begin
        if PTR.ExArea.ExLeft = 0.0 then
        begin
          if BorderWidth = 0.0 then
            PTR.LineInfo.LeftThick := ReportConfig.BorderUnderLineWidth;
        end;
        if PTR.ExArea.ExRight = 100.0 then
        begin
          if BorderWidth = 0.0 then
            PTR.LineInfo.RightThick := ReportConfig.BorderUnderLineWidth
        end;
      end;

      procedure SetHorLine;
      begin
        if (PTR.LineInfo.TopThick >= 0.2) and (BorderWidth <= 0.2) then
          PTR.LineInfo.TopThick := ReportConfig.CellHorLineWidth;
        if (PTR.LineInfo.BottomThick >= 0.2) and (BorderWidth <= 0.2) then
          PTR.LineInfo.BottomThick := ReportConfig.CellHorLineWidth;
      end;

    begin
      SetLeftRightBorder;
      SetHorLine;
    end;

    procedure SetPCRBorder(PCR : PColumnRec);

      procedure SetLeftRightBorder;
      begin
        if PCR.ExArea.ExLeft = 0.0 then
        begin
          if BorderWidth = 0.0 then
            PCR.LineInfo.LeftThick := ReportConfig.BorderUnderLineWidth
        end;
        if PCR.ExArea.ExRight = 100.0 then
        begin
          if BorderWidth = 0.0 then
            PCR.LineInfo.RightThick := ReportConfig.BorderUnderLineWidth;
        end;
      end;

      procedure SetVerLine;
      begin
        if PCR.ExArea.ExLeft = 0.0 then
           PCR.LineInfo.LeftThick := ReportConfig.CellVerLineWidth;
        if PCR.ExArea.ExRight = 100.0 then
           PCR.LineInfo.RightThick := ReportConfig.CellVerLineWidth;
      end;

      procedure SetHorLine;
      begin
        if (PCR.LineInfo.TopThick >= 0.2) and (BorderWidth <= 0.2) then
          PCR.LineInfo.TopThick := ReportConfig.CellHorLineWidth;
        if (PCR.LineInfo.BottomThick >= 0.2) and (BorderWidth <= 0.2) then
          PCR.LineInfo.BottomThick := ReportConfig.CellHorLineWidth;
      end;

    begin
      SetLeftRightBorder;
      SetVerLine;
      SetHorLine;
    end;

  var i,k : integer;
      ObjList : TList;
      ActAreaRec : PActiveAreaRec;
      PSR : PShowElementRec;
  begin
    ObjList := TList.Create;
    try
      ActAreaRec := nil;
      PreviewComXML.getAllActAreaObjs(ObjList);
      for i := 0 to ObjList.Count - 1 do
      begin
        ActAreaRec := ObjList[i];
        if (ActAreaRec.ShowType < 0) or (ActAreaRec.ShowType > 2) then Continue;
        if not Assigned(ActAreaRec.ElementList) then Continue;

        for k := 0 to ActAreaRec.ElementList.Count - 1 do
        begin
          PSR := PShowElementRec(ActAreaRec.ElementList[k]);
          case PSR.ElementType of
            0..2 : SetPTRBorder(PSR.Data); //文本,参数,字段,表栏
            7 : SetPCRBorder(PSR.Data) //Column
          end;
          APrintCom.setActShowElementObj(PSR);
        end;
      end;
    finally
      ObjList.Free;
    end;
  end;

begin
  if not Assigned(ATemplate) or (ATemplate.SelfFormat = 0) then
  begin
    InitFont(APrintCom);           // 各类字体
    InitRepBorderLine;  // 报表边框
    InitRepCellLine;    // 报表表格
    InitOtherArea;      // 活动区域
  end;
end;

procedure TReportsForm.PreviewComXMLCrossTabLabelShow(valIDX: Integer;
  var ExLeft, ExRight: Double; var isShow: Boolean;
  CrsTabShowType: Integer);
var field : PFieldRec;
begin
  if (CrsTabShowType = -1) then exit;
  field := PreviewComXML.getFieldByID(6);
  if (field <> nil) then
  begin
    if (field.DataLen > valIDX) and (valIDX >= 0) then
    begin
      if (field.Value[valIDX] = 1.5) then
      begin
        case CrsTabShowType of
          1 : begin
                isShow := false;
              end;
          2 : begin
                ExLeft := 0;
                ExRight := 100;
              end;
          3 : begin
                //
              end
          else
              begin
                //
              end;
        end;
      end;
    end;
  end;
end;

procedure TReportsForm.rdbtnA4Click(Sender: TObject);
begin
  ReportConfig.PageSize := TRadioButton(Sender).Caption;
  SetPrinterPageSize(ReportConfig.PageSize);
  LoadTempletAndDisplay;
end;

procedure TReportsForm.chkFillZeroClick(Sender: TObject);
begin
  PreviewComXML.FillZero := chkFillZero.Checked;
  PreviewReportCurPage;
end;

procedure TReportsForm.InitFont(APrintCom: TPrintComXML);

  procedure AssignFontRec(AFontRec: TFontRec; AFont: TFont);
  begin
    AFontRec.FontName := AFont.Name;
    AFontRec.FontHeight := Round(AFont.Size*4/3) ;
    AFontRec.FontBold := 400 + Integer(fsBold in AFont.Style)*200;
    AFontRec.FontItalic := Integer(fsItalic in AFont.Style);
    AFontRec.FontUnderLine := Integer(fsUnderLine in AFont.Style);
  end;

  procedure InitTitleFont;
  var
    TitleRec : PTitleRec;
  begin
    TitleRec := PreviewComXML.getTitleByID(1);
    if TitleRec <> nil then
    begin
      AssignFontRec(TitleRec.FontRec, ReportConfig.TitleFont);
      APrintCom.setTitleObj(TitleRec);
    end;
  end;

  procedure InitColumnFont;

    procedure InitColumnThick(AColumnRec: PColumnRec);
    begin
      if (ReportConfig.ReportCellLine > 0.2) then
      begin
        if (AColumnRec.LineInfo.LeftThick > 0.2) then
            AColumnRec.LineInfo.LeftThick := ReportConfig.ReportCellLine;
        if (AColumnRec.LineInfo.RightThick > 0.2) then
            AColumnRec.LineInfo.RightThick := ReportConfig.ReportCellLine;
        if (AColumnRec.LineInfo.TopThick > 0.2) then
            AColumnRec.LineInfo.TopThick := ReportConfig.ReportCellLine;
        if (AColumnRec.LineInfo.BottomThick > 0.2) then
            AColumnRec.LineInfo.BottomThick := ReportConfig.ReportCellLine;
      end;
    end;

  var
    i, j: Integer;
    ObjList: TList;
    ColumnRec : PColumnRec;
    AAR : PActiveAreaRec;
    SER : PShowElementRec;
  begin
    ObjList := TList.Create;
    try
      APrintCom.getAllColumnHeadObjs(ObjList);
      for i := 0 to ObjList.Count - 1 do
      begin
        ColumnRec := ObjList[i];
        AssignFontRec(ColumnRec.FontRec, ReportConfig.ColumnFont);
        InitColumnThick(ColumnRec);
        APrintCom.setColumnHeadTailObj(0, ColumnRec);
      end;
      APrintCom.getAllColumnTailObjs(ObjList);
      for i := 0 to ObjList.Count - 1 do
      begin
        ColumnRec := ObjList[i];
        AssignFontRec(ColumnRec.FontRec, ReportConfig.ColumnFont);
        InitColumnThick(ColumnRec);
        APrintCom.setColumnHeadTailObj(1,ColumnRec);
      end;
      APrintCom.getAllActAreaObjs(ObjList);
      for i := 0 to ObjList.Count - 1 do
      begin
        AAR := ObjList[i];
        for j := 0 to AAR.ElementList.Count - 1 do
        begin
          SER := AAR.ElementList[j];
          if (SER.ElementType = 7) then
          begin
            ColumnRec := SER.Data;
            AssignFontRec(ColumnRec.FontRec, ReportConfig.ColumnFont);
            InitColumnThick(ColumnRec);
            APrintCom.setActShowElementObj(SER);
          end;
        end;
      end;
    finally
      ObjList.Free;
    end;
  end;

  procedure InitContentAndGatherFont;
  var
    i, j: Integer;
    ObjList: TList;
    FlowContentRec : PContentRec;
    CrossContentRec : PCrossContentRec;
    SumRec : PSumRec;
  begin
    ObjList := TList.Create;
    try
      // 设置表正文
      APrintCom.getAllFlowShowContentObjs(ObjList);
      for i := 0 to ObjList.Count - 1 do
      begin
        FlowContentRec := ObjList[i];
        if not (FlowContentRec.Fixed) then
        begin
          AssignFontRec(FlowContentRec.FontRec, ReportConfig.ContentFont);
          APrintCom.setFlowContentObj(FlowContentRec);
        end;
      end;
      APrintCom.getAllBillShowContentObjs(ObjList);
      for i := 0 to ObjList.Count - 1 do
      begin
        FlowContentRec := ObjList[i];
        if not(FlowContentRec.Fixed) then
        begin
          AssignFontRec(FlowContentRec.FontRec, ReportConfig.ContentFont);
          APrintCom.setBillContentObj(FlowContentRec);
        end;
      end;
      APrintCom.getAllCrossContentObjs(ObjList);
      for i := 0 to ObjList.Count - 1 do
      begin
        CrossContentRec := ObjList[i];
        if not(CrossContentRec.CrossContent.Fixed) then
        begin
          AssignFontRec(CrossContentRec.CrossContent.FontRec, ReportConfig.ContentFont);
          APrintCom.setCrossContentObj(CrossContentRec);
        end;
      end;
      // 设置表合计
      for i := 0 to 2 do
      begin
        APrintCom.getAllSumObjs(i,ObjList);
        for j := 0 to ObjList.Count - 1 do
        begin
          SumRec := ObjList[j];
          AssignFontRec(SumRec.FontRec, ReportConfig.GatherFont);
          APrintCom.setSumObj(SumRec);
        end;
      end;
    finally
      ObjList.Free;
    end;
  end;

  procedure InitGridHeaderFont;
  var
    i: Integer;
    ObjList: TList;
    HeadTailRec : PHeadRec;
  begin
    ObjList := TList.Create;
    try
      APrintCom.getAllHeadObjs(ObjList);
      for i := 0 to ObjList.Count - 1 do
      begin
        HeadTailRec := ObjList[i];
        AssignFontRec(HeadTailRec.FontRec, ReportConfig.GridHeaderFont);
        APrintCom.setHeadTailObj(0, HeadTailRec);
      end;
      APrintCom.getAllTailObjs(ObjList);
      for i := 0 to ObjList.Count - 1 do
      begin
        HeadTailRec := ObjList[i];
        AssignFontRec(HeadTailRec.FontRec, ReportConfig.GridHeaderFont);
        APrintCom.setHeadTailObj(1, HeadTailRec);
      end;
    finally
      ObjList.Free;
    end;
  end;

begin
  InitTitleFont;
  InitColumnFont;
  InitContentAndGatherFont;
  InitGridHeaderFont;
end;

procedure TReportsForm.PreviewComXMLGetDatasetEvent(
  DatasetInfo: PDatasetInfoRec; var ADataset: TDataSet);
begin
  if DatasetInfo.ID = 0 then
    ADataSet := MemoryReportManager.GetSqlResultDataSet(ReportTemplateManager.Current.InteractInfo.Sql, FProjectData)
  else
    ADataset := MemoryReportManager.GetMemoryDataSet(DatasetInfo.ID, FProjectData);
end;

function TReportsForm.GetIsExcel2010: Boolean;
begin
  Result := chkExcel2010.Checked;
end;

procedure TReportsForm.InitFormView;
begin
  rdbtnA3.Checked := SameText(rdbtnA3.Caption, ReportConfig.PageSize);
  rdbtnA4.Checked := SameText(rdbtnA4.Caption, ReportConfig.PageSize);
  SetPrinterPageSize(ReportConfig.PageSize);   
  pnlSearch.Visible := _IsDebugView;
  if G_IsCloud then
  begin
    btnRMgr.Visible := True;
    tbImportSrt.Visible := False;
  end
  else
  begin
    btnRMgr.Visible := False;
    tbImportSrt.Visible := True;
  end;
end;

procedure TReportsForm.LoadExcelBorder(var Border: TColumnLineRec);
begin
  Border.LeftThick := 0.5;
  Border.TopThick := 0.5;
  Border.RightThick := 0.5;
  Border.BottomThick := 0.5;
  if not ReportConfig.RepBorderVerLine then
  begin
    Border.LeftThick := 0;
    Border.RightThick := 0;
  end;
end;

procedure TReportsForm.PrintReport(ATemplateNode: TTemplateNode;
  isPDF, isExcel: boolean; ExcelOutputName, TemplateFileName: string);

  function CheckPrinterReady: Boolean;
  var
    PrinterHD: THandle;
    NoJobs: Word;
    s: LongWord;
    Job_Info: Array[0..10] of Job_INFO_1;
    cbNeeded: Cardinal;
    cReturned: Cardinal;
    ret: LongBool;
  begin
    if OpenPrinter(PChar(Printer.Printers[Printer.PrinterIndex]), PrinterHD, 0) then
    begin
      s := SizeOf(Job_Info);
      cbNeeded := 0;
      cReturned := 0;
      NoJobs := 10;
      ret := ENumJobs(PrinterHD, 0, NoJobs, 1, @Job_Info, s, cbNeeded, cReturned);
      Result := not((cReturned > 0) and (Job_Info[0].TotalPages > 0));
    end
    else
      Result := True;
  end;

  procedure PrintTemplet;
  var
    sFileName: string;
  begin
    if isPDF then
    begin 
      sFileName := BatchPrintXml.ReportName + '.pdf';
      if SaveFile(sFileName, '.pdf') then
        PdfHelper.ExportAllPages(BatchPrintXml, sFileName);
      (*
      BatchPrintXml.PrintPDFAll(PreviewBox.Canvas);
      while not CheckPrinterReady do
        Sleep(1000);
      *)
    end
    else if not isExcel then
      BatchPrintXml.PrintAll(PreviewBox.Canvas, 1)
    else
      ExportXlsReport(1, BatchPrintXml.TotalPages, ExcelOutputName, BatchPrintXml);
  end;

var
  strRptName : string;
begin
  if not FileExists(ATemplateNode.FileName) then Exit;

  ClearReportOprList;
  ClearReportFuncList;

  Screen.Cursor := crHourGlass;
  try
    LoadTemplet(ATemplateNode, BatchPrintXml);
    if BatchPrintXml.TotalPages > 0 then
      PrintTemplet
    {else if strRptName <> '' then
    begin
      LoadTemplet(RptArchiverObj, strRptName);
      PrintEmptyTemplet;
    end;}
  finally
    Screen.Cursor := crDefault;
  end;
end;

procedure TReportsForm.ExportXlsReport(AStartPage, AEndPage: Integer;
  const AFileName: string; APrintCom: TPrintComXML);

  procedure ExportPagesXlsReport(AStartPage, AEndPage: Integer; const AFileName: string);
  var
    Border : TColumnLineRec;
  begin
    LoadExcelBorder(Border);
    if IsExcel2010 then
      APrintCom.OutputToExcelFileOE(PreviewBox.Canvas, AStartPage, AEndPage, AFileName, ExcelMode, Border, nil)
    else
      //APrintCom.OutputToExcelFile(PreviewBox.Canvas, AStartPage, AEndPage, GetTemplateXlsFileName, AFileName, ExcelMode, Border);
      APrintCom.OutputToExcelFileOE(PreviewBox.Canvas, AStartPage, AEndPage, AFileName, ExcelMode, Border, nil);
      //现2010格式与之前格式应用同一控件导出
  end;

var
  iStartPage, iEndPage, iCount: Integer;
  sFileName: string;
begin
  BeforeExport;
  try
    if (ExcelMode = oemNormal) and (PrintEndPage - PrintStartPage > 30) then
    begin
      iStartPage := PrintStartPage;
      iEndPage := iStartPage + 19;
      iCount := 1;
      repeat
      begin
        if IsExcel2010 then
          sFileName := Format('%s[%d].xlsx', [ExtractSimpleFileName(AFileName), iCount])
        else
          sFileName := Format('%s[%d].xls', [ExtractSimpleFileName(AFileName), iCount]);
        ExportPagesXlsReport(iStartPage, iEndPage, sFileName);
        iStartPage := iStartPage + 20;
        iEndPage := Min(iEndPage + 20, PrintEndPage);
        Inc(iCount);
      end
      until iStartPage > iEndPage;
    end
    else
      ExportPagesXlsReport(AStartPage, AEndPage, AFileName);
  finally
    AfterExport;
  end;
end;

procedure TReportsForm.LoadTemplet(ATemplate: TTemplateNode; APrintCom: TPrintComXML);
var
  RptArchiverObj: TReportArchiver;
  Mem: TMemoryStream;
begin
  RptArchiverObj := TReportArchiver.Create;
  if ATemplate.IsMulti then
    RptArchiverObj.FileName := ATemplate.MultiFileNames[FProjectData.PhaseIndex]
  else
    RptArchiverObj.FileName := ATemplate.FileName;
  Mem := RptArchiverObj.Extract;
  try
    // 以下代码有顺序限制，不可修改，主要保证在不修改报表模板文件的基础上可以用户定制报表格式
    // 私以为，原因在于这些设置修改后，并不能生效，需要保存再读取方可生效
    // 读取报表模板
    if not APrintCom.ReadReportStream(Mem) then Exit;
    // 将报表设置中的数据覆盖掉原模板的数据
    InitReportSettings(APrintCom, ATemplate);
    // 保存
    APrintCom.SaveToStream(Mem);
    // 再次读取，使报表设置中的设置生效
    APrintCom.ReadReportStream(Mem);
    // ReadReportStream之后会将PreviewComXML的FillZero值赋为True，故再赋值一次
    APrintCom.FillZero := chkFillZero.Checked;
    InitPageSettings(APrintCom);
    APrintCom.ReadDBData;
    //设置好字体，否则Canvas的默认字体在计算自动行高的时候会出现偏差
    PreviewBox.Canvas.Font.Name := ReportConfig.ContentFont.Name;
    PreviewBox.Canvas.Font.Size := ReportConfig.ContentFont.Size;
    APrintCom.AnalyseData(PreviewBox.Canvas);
  finally
    if Mem <> nil then
      Mem.Free;
    RptArchiverObj.Free;
  end;
end;

function TReportsForm.GetHintStr: string;
begin
  Result := #13#10 +
            '对不起，学习版不提供报表打印、导出功能。'#13#10 +
            #13#10 +
            '以下为收费服务项目，请在必要时联系纵横：'#13#10 +
            #13#10 +
            '企业QQ：800003850   客服热线：(0756)3850888';
end;

function TReportsForm.GetSubClassNode(AClassNode: TExTreeNode;
  ANode: TTemplateNode): TExTreeNode;

  function FindNode(AParent: TExTreeNode; const AName: string): TExTreeNode;
  var
    I: Integer;
    vNode: TExTreeNode;
  begin
    Result := nil;
    if Assigned(AParent) then
      vNode := AParent.getFirstChild
    else
      vNode := extvReport.Items.GetFirstNode;
    while not Assigned(Result) and Assigned(vNode) do
    begin
      if SameText(vNode.Text, AName) then
        Result := vNode;
      vNode := vNode.getNextSibling;
    end;
  end;

begin
  Result := FindNode(AClassNode, ANode.SubClassNum + '.' + ANode.SubClassName);
  if not Assigned(Result) then
    Result := AddClassNode(AClassNode, ANode.SubClassNum + '.' + ANode.SubClassName);
end;

function TReportsForm.AddClassNode(AParent: TExTreeNode;
  const AName: string): TExTreeNode;
begin
  Result := extvReport.Items.AddChildObject(AParent, AName, Pointer(nil));
  Result.ImageIndex := 0;
  Result.SelectedIndex := 1;
  Result.Checked := csUnchecked;
  Result.Expanded := True;
end;

procedure TReportsForm.SaveReportInteractData(ATemplate: TTemplateNode);
begin
  case ATemplate.InteractFlag of
    1: SaveAuditOpinion(ATemplate);
  end;
end;

procedure TReportsForm.SaveAuditOpinion(ATemplate: TTemplateNode);
var
  SelectForm: TAuditSelctForm;
begin
  SelectForm := TAuditSelctForm.Create(FProjectData, ATemplate);
  try
    if SelectForm.ShowModal = mrOk then
      SelectForm.SaveAuditData;
  finally
    SelectForm.Free;
  end;
end;

destructor TReportsForm.Destroy;
begin
  FReportCon.Free;
  FReportDataPrepare.Free;
  inherited;
end;

//  启用报表模板管理器，报表导入功能取消。
procedure TReportsForm.btnRMgrClick(Sender: TObject);
var vRMForm: TReportManagerForm;
begin
  Screen.Cursor := crHourGlass;
  vRMForm := TReportManagerForm.Create(nil);
  vRMForm.ReportsForm := Self;
  try
    vRMForm.ShowModal;
  finally
    vRMForm.Free;
    Screen.Cursor := crDefault;
  end;
end;

procedure TReportsForm.RefreshReportTemplets;
begin
  ReportTemplateManager.RefreshTemplates;
  LoadReportTemplets;
  LoadTempletAndDisplay;
end;


procedure TReportsForm.FormActivate(Sender: TObject);
var vReports: TReports;
begin
  // 自动检测并提醒用户有新报表要更新
  if G_IsCloud then
  begin
    vReports := TReports.Create(nil);
    try
      if vReports.HasNeedUpdateReport then
      begin
        Application.MessageBox('系统检测到有新的报表可以更新！', '提示', MB_OK + MB_ICONINFORMATION);
        btnRMgr.Click;
      end;
    finally
      vReports.Free;
    end;
  end;
end;

procedure TReportsForm.imgSearchClick(Sender: TObject);

  function SearchAfter(const AText: string; vBegin: TExTreeNode): TExTreeNode;
  var
    vNext: TExTreeNode;
  begin
    Result := nil;
    vNext := vBegin.GetNext;
    while Assigned(vNext) and not Assigned(Result) do
    begin
      if (Pos(AText, vNext.Text) > 0) then
        Result := vNext;
      vNext := vNext.GetNext;
    end;
  end;

  function SearchBegin(const AText: string; vEnd: TExTreeNode): TExTreeNode;
  var
    vPre: TExTreeNode;
  begin
    Result := nil;
    vPre := extvReport.Items.GetFirstNode;
    while (vPre <> vEnd) and not Assigned(Result) do
    begin
      if (Pos(AText, vPre.Text) > 0) then
        Result := vPre;
      vPre := vPre.GetNext;
    end;
  end;

  procedure SearchReportTemplate(const AText: string);
  var
    vNode: TExTreeNode;
  begin
    vNode := SearchAfter(AText, extvReport.Selected);
    if not Assigned(vNode) then
      vNode := SearchBegin(AText, extvReport.Selected);
    if Assigned(vNode) then
    begin
      extvReport.Selected := vNode;
      extvReport.OnClick(extvReport);
    end
    else
      WarningMessage(Format('未找到含关键字“%s”的报表，请缩短关键字后查询', [AText]));
  end;

begin
  SearchReportTemplate(edtSearch.Text);
end;

procedure TReportsForm.extvReportKeyDown(Sender: TObject; var Key: Word;
  Shift: TShiftState);
begin
  if (ssCtrl in Shift) and (ssShift in Shift) and (ssAlt in Shift)
      and (Key in [67, 99]) then // 'c', 'C'
    extvReport.FullCollapse;
end;

procedure TReportsForm.ExportReportPage(APage: Integer;
  const APageFileName: string; AOrg: Boolean);
var
  bmp, bmpCut: TBitmap;
  img: TJPEGImage;
  iCutHeight, iCutWidth, iCutTop, iCutLeft, iCutRight, iCutBottom: Integer;
begin
  bmp := TBitmap.Create;
  bmpCut := TBitmap.Create;
  img := TJPEGImage.Create;
  try
    bmp.Height := PreviewComXML.ReportSize.Y;
    bmp.Width := PreviewComXML.ReportSize.X;
    PreviewComXML.PrintPreviewCanvas(APage, 0, bmp.Canvas, False);

    iCutHeight := Round(PreviewComXML.ReportSize.Y / 200);
    iCutWidth := Round(PreviewComXML.ReportSize.X / 200);
    bmpCut.Height := PreviewComXML.ReportSize.Y - iCutHeight * 2;
    bmpCut.Width := PreviewComXML.ReportSize.X - iCutWidth * 2;
    bmpCut.Canvas.CopyRect(Rect(0, 0, bmpCut.Width, bmpCut.Height), bmp.Canvas, Rect(iCutWidth, iCutHeight, bmp.Width - iCutWidth, bmp.Height - iCutHeight));

    if not AOrg then
      img.Assign(bmpCut)
    else
      img.Assign(bmp);
    img.CompressionQuality := 100;
    img.Compress;
    img.SaveToFile(APageFileName);
  finally
    bmpCut.Free;
    bmp.Free;
    img.Free;
  end;
end;

end.