Measure/Units/ProjectData.pas

unit ProjectData;

interface

uses
  Connections, BillsDm, PhaseData, UpdateDataBase, ZhAPI, ProjectProperty,
  PhaseCompareDm, DealPaymentDm, SearchDm, DealBillsDm, MainDataListDm,
  BillsGatherDm, BGLDm, StaffDm, BillsCompileDm, BillsMeasureDm,
  BillsBookmarkDm, UpFileManageUnit, ProjectGLDm, PriceMarginBillsDm,
  DetailGLDm, OtherMeasureOnceDm, OtherMeasurePhaseDm,
  Classes, SysUtils, ADODB, sdDB, Checker;

type

  TProjectData = class
  private
    // 临时文件夹，解压项目后存放文件的文件夹
    FTempFolder: string;
    // 项目管理界面看到的项目名称
    FProjectName: string;
    FFileName: string;
    FProjectID: Integer;
    FConnection: TEncryptConnection;
    FUpdator: TUpdateProjectDB;
    FIsNewFile: Boolean;
    FDebugDir: string;

    FBillsData: TBillsData;
    FBillsCompileData: TBillsCompileData;
    FBillsMeasureData: TBillsMeasureData;
    FBillsBookmarkData: TBillsBookmarkData;
    FDealBillsData: TDealBillsData;
    FProjProperties: TProjProperties;

    FPhaseIndex: Integer;
    FPhaseData: TPhaseData;
    FPhaseCompareData: TPhaseCompareData;
    FBillsGatherData: TBillsGatherData;
    FDealPaymentData: TDealPaymentData;
    FBGLData: TBGLData;
    FStaffData: TStaffData;
    FSearchData: TSearchData;
    FMainListData: TMainListData;

    FProjectGLData: TProjectGLData;
    FDetailGLData: TDetailGLData;
    FPriceMarginBillsData: TPriceMarginBillsData;

    FOtherMeasureOnceData: TOtherMeasureOnceData;
    FOtherMeasurePhaseData: TOtherMeasurePhaseData;

    FCanUnlockInfo: Boolean;

    FWebID: Integer;
    FWebOwnerID: Integer;
    FWebAuthorID: Integer;
    FAuthorHasSubmited: Boolean;
    FProjectReadOnly: Boolean;
    FAttachmentData: TUpFiles;
    FCheckers: TCheckers;
    FIsGuest: Boolean;

    {For Open}
    procedure UpdateProjectDataBase;
    procedure CheckNewFile(AConnection: TADOConnection);
    procedure OpenLastPhaseData;
    procedure UpdateOldData;

    procedure SaveInfoToManager;

    procedure DropCacheTable(const AKey: string);

    // 备份0号台账的历史数据
    procedure CopyLedgerHistoryData(AAudit: Integer);
    // 备份各期的截止本期累计完成数据
    procedure CopyPhaseCompleteData;

    procedure SetPhaseIndexSimple(AIndex: Integer);

    // 锁定数据 -- Sql语句方式(使用时注意相应的DataMoudle应处于关闭状态)
    procedure LockBillsBaseData;
    procedure LockDealPaymentData;
    procedure LockProjectGLData;
    procedure LockDetailGLData;

    procedure UpdatePhaseData;

    procedure CloseAllData;
    procedure OpenAllData;

    procedure InnerSave;

    procedure LoadCheckersData;

    function GetMainFileName: string;
    procedure SetPhaseIndex(const Value: Integer);
    function GetTempPath: string;
    function GetProjectFileName: string;
    function GetAllowInsert: Boolean;
    function GetBaseDataReadOnly: Boolean;
    function GetADOConnection: TADOConnection;
    procedure SetCheckers(const Value: TCheckers);
    function GetStageDataReadOnly: Boolean;
    function GetPriceMarginReadOnly: Boolean;
    function GetStageIndex: Integer;
    procedure SetStageIndex(const Value: Integer);
    function GetCanInsertNormalBills: Boolean;
    function GetValidStageIsRefer: Boolean;
    function GetStartMeasure: Boolean;
    procedure SetIsGuest(const Value: Boolean);
  public
    constructor Create;
    destructor Destroy; override;

    procedure Open(AProjRec: TsdDataRecord);
    procedure Save;
    function SaveAs(const AFileName: string): Boolean;
    procedure SaveAndCheck;
    //----------------------- Begin ---后台打开 ------------------------
    {总说明：
       为节省内存使用，对不同的后台打开分别写不同的方法
       按需使用，稍有不同，则新增后台打开方法
       变更(新增)方法须同步变更(新增)注释
    }
    {OpenForSubmit: ProjProperties, StaffData}
    procedure OpenForSubmit(const AFileName: string);
    procedure SaveAsForSubmit(const AFileName: string);
    {OpenForReply: ProjProperties, StaffData, PhaseData, DetailGLData}
    procedure OpenForReply(const AFileName: string);
    procedure SaveForReply(const AFileName: string);
    {OpenForReceive: ProjProperties, StaffData, PhaseData, StageData}
    procedure OpenForReceive(const AFileName: string);
    procedure SaveForReceive(const AFileName: string);
    {SimpleOpen: 仅打开数据库[项目+最后一期]，不打开除属性以外的任何数据表（项目属性都是通过Sql语句修改）}
    procedure SimpleOpen(const AFileName: string);
    procedure SimpleSaveAs(const AFileName: string);
    {OpenForReport: BillsData, BillsCompileData, DealPaymentData, BGLData 报表仅读取数据不做任何修改}
    procedure OpenForReport(const AFileName: string);
    {OpenForReport2: OpenForReport的基础上打开最后一期数据}
    procedure OpenForReport2(const AFileName: string);
    {OpenForReport3: OpenForReport2的基础上打开最后一个审核人数据，打开BillsMeasureTree不打开BillsCompileTree，链接BillsMeasureTree跟StageData}
    procedure OpenForReport3(const AFileName: string);
    {OpenForGather: BillsData, BillsMeasureTree, DealPaymentData, BGLData, PhaseData(根据PhaseIndex指定打开)}
    procedure OpenForGather(const AFileName: string; APhaseIndex: Integer = -1);
    {OpenForSignOnline: BillsData, BillsMeasureTree, PhaseData(根据PhaseIndex指定打开)}
<<<<<<< HEAD
    procedure OpenForSignOnline(AProjRec: TsdDataRecord; APhaseIndex: Integer = -1);
=======
    procedure OpenForSignOnline(const AFileName: string; APhaseIndex: Integer = -1);
    {OpenForSumUpBase: BillsData, BillsComplieTree}
    procedure OpenForSumUpBase(const AFileName: string);
    {OpenForSumUpGather: BillsData, BillsMeasureTree, PhaseData(根据PhaseIndex指定打开)，直接调用OpenForSignOnline}
    procedure OpenForSumUpGather(const AFileName: string; APhaseIndex: Integer = -1);
>>>>>>> sumUp
    //-----------------------  End ---后台打开 ------------------------

    procedure SaveDebugFile(const AFileName: string);
    procedure SaveTempDataBaseFile(const AFileName: string);

    procedure SaveLastestPhaseMainData;

    procedure CopyPreData;
    procedure CreateNewPhase;

    {重设所有LookUpDataset连接}
    procedure ResetPhaseDataLink;
    {重设所有DataView小数位数显示}
    procedure ResetFloatDigitView;

    {锁定数据}
    // 上报
    procedure LockedDataForSubmit;
    // 终审批复
    procedure LockedDataForReply;
    {创建审核数据}
    procedure UpdateDataForReceive;

    // 上报文件:
    { 返回值：
      1. True 文件检验结果正确，生成文件
      2. False 文件检验结果错误，不生成文件}
    function SubmitProject(const AFileName: string = ''): Boolean;
    // 批复文件: 返回值含义同上报
    function ReplyProject(const AFileName: string = ''): Boolean;
    // json文件：清单
    procedure ExportJson_Bills(const AFileName: string);
    procedure ExportJson_Common(const AFileName: string);

    // 断开所有树的链接
    procedure DisConnectTree;
    // 重新连接所有的树
    procedure ReConnectTree;

    {For Reports: 复制当期的全部数据到项目数据中}
    procedure CopyPhaseData(ASaveBeforeCopy: Boolean = true);
    procedure ClearReportCacheData;
    procedure ClearReportPrepareData;
    procedure ExecuteSql(const ASql: string);

    procedure CalculateAll;
    procedure CalculatePriceMargin;

    function CheckDataBaseInfo(APhaseCount, AAuditStatus: Integer): Boolean;

    procedure ImportCloudTenderFile(const AFileName: string);
    procedure ImportDmfFile(const AFileName: string);
    procedure ImportSubTenderGather(const AFileName: string);

    function CheckPassword: Boolean;

    function CheckPhaseFileComplete: Boolean;
    function CheckLastPhaseFileExist: Boolean;

    procedure AppendProjectLog(const ALog: string);

    function CurUserIsOwner: Boolean;
    function CurUserIsAuthor: Boolean;
    function CurUserIsChecker: Boolean;
    function IsHistoryPhase: Boolean;

    property BillsData: TBillsData read FBillsData;
    property BillsCompileData: TBillsCompileData read FBillsCompileData;
    property BillsMeasureData: TBillsMeasureData read FBillsMeasureData;
    property BillsBookmarkData: TBillsBookmarkData read FBillsBookmarkData;
    property DealBillsData: TDealBillsData read FDealBillsData;
    property PhaseIndex: Integer read FPhaseIndex write SetPhaseIndex;
    property StageIndex: Integer read GetStageIndex write SetStageIndex;
    property PhaseData: TPhaseData read FPhaseData;
    property ProjProperties: TProjProperties read FProjProperties;
    property PhaseCompareData: TPhaseCompareData read FPhaseCompareData;
    property BillsGatherData: TBillsGatherData read FBillsGatherData;
    property DealPaymentData: TDealPaymentData read FDealPaymentData;
    property BGLData: TBGLData read FBGLData;
    property StaffData: TStaffData read FStaffData;
    property SearchData: TSearchData read FSearchData;
    property MainListData: TMainListData read FMainListData;
    property AttachmentData: TUpFiles read FAttachmentData;   // 附件

    property ProjectGLData: TProjectGLData read FProjectGLData;
    property DetailGLData: TDetailGLData read FDetailGLData;
    property PriceMarginBillsData: TPriceMarginBillsData read FPriceMarginBillsData;

    property OtherMeasureOnceData: TOtherMeasureOnceData read FOtherMeasureOnceData;
    property OtherMeasurePhaseData: TOtherMeasurePhaseData read FOtherMeasurePhaseData;

    // 台账、合同支付
    property AllowInsert: Boolean read GetAllowInsert;
    property BaseDataReadOnly: Boolean read GetBaseDataReadOnly;
    property StageDataReadOnly: Boolean read GetStageDataReadOnly;
    property PriceMarginReadOnly: Boolean read GetPriceMarginReadOnly;
    property ValidStageIsRefer: Boolean read GetValidStageIsRefer;
    property StartMeasure: Boolean read GetStartMeasure;

    property CanUnlockInfo: Boolean read FCanUnlockInfo write FCanUnlockInfo;
    property CanInsertNormalBills: Boolean read GetCanInsertNormalBills;

    property ProjectName: string read FProjectName;
    // 磁盘上存储该项目的文件名称
    property FileName: string read FFileName;
    property ProjectID: Integer read FProjectID;
    property MainFileName: string read GetMainFileName;
    property TempPath: string read GetTempPath;
    property ADOConnection: TADOConnection read GetADOConnection;

    property WebID: Integer read FWebID;
    property WebOwnerID: Integer read FWebOwnerID;
    property WebAuthorID: Integer read FWebAuthorID;
    property AuthorHasSubmited: Boolean read FAuthorHasSubmited write FAuthorHasSubmited;

    property ProjectReadOnly: Boolean read FProjectReadOnly;
    property Checkers: TCheckers read FCheckers write SetCheckers;
    property IsGuest: Boolean read FIsGuest write SetIsGuest;
  end;

implementation

uses UtilMethods, Globals, ProjectCommands, sdIDTree, StageDm,
  ZJJLDm, PHPWebDm, XMLDoc, XMLIntf, ConstUnit, PasswordInputFrm,
  mProgressProFrm, mDataRecord, ConditionalDefines, DbTreeImport,
<<<<<<< HEAD
  StrUtils, sdProvider, CalcDecimal, Math, CslJson, OrderCheckerFme;
=======
  StrUtils, sdProvider, CalcDecimal, Math, stgSubGatherFile;
>>>>>>> sumUp

{ TProjectData }

procedure TProjectData.CheckNewFile(AConnection: TADOConnection);
var
  FTableList: TStringList;
begin
  FTableList := TStringList.Create;
  try
    AConnection.GetTableNames(FTableList);
    FIsNewFile := FTableList.Count = 0;
  finally
    FTableList.Free;
  end;
end;

procedure TProjectData.CopyLedgerHistoryData(AAudit: Integer);
const
  sSql = 'Select ID as BillsID, Quantity, TotalPrice, QtyFlag, QtyFormula ' +
         'Into LedgerHistory%d '+
         'From Bills';
begin
  ExecuteSql(Format(sSql, [AAudit]));
end;

constructor TProjectData.Create;
begin
  FCheckers := TCheckers.Create;
  FTempFolder := GenerateTempFolder(GetTempFilePath);
  FConnection := TEncryptConnection.Create;
  FUpdator := TUpdateProjectDB.Create;
  FProjProperties := TProjProperties.Create(Self);
  FBillsData := TBillsData.Create(Self);
  FBillsCompileData := TBillsCompileData.Create(Self);
  FBillsMeasureData := TBillsMeasureData.Create(Self);
  FBillsBookmarkData := TBillsBookmarkData.Create(Self);
  FDealBillsData := TDealBillsData.Create(Self);
  FPhaseData := TPhaseData.Create(Self);
  FPhaseCompareData := TPhaseCompareData.Create(Self);
  FBillsGatherData := TBillsGatherData.Create(Self);
  FDealPaymentData := TDealPaymentData.Create(Self);
  FBGLData := TBGLData.Create(Self);
  FStaffData := TStaffData.Create(Self);
  FSearchData := TSearchData.Create(Self);
  FMainListData := TMainListData.Create(Self);
  FProjectGLData := TProjectGLData.Create(Self);
  FDetailGLData := TDetailGLData.Create(Self);
  FPriceMarginBillsData := TPriceMarginBillsData.Create(Self);
  FOtherMeasureOnceData := TOtherMeasureOnceData.Create(Self);
  FOtherMeasurePhaseData := TOtherMeasurePhaseData.Create(Self);
  FAttachmentData := TUpFiles.Create;
  FPhaseIndex := 0;
end;

procedure TProjectData.CreateNewPhase;
var
  sPhaseFileName: string;
begin                       
  FProjProperties.Save;
  FBillsData.LockedBaseData;
  FProjProperties.PhaseCount := FProjProperties.PhaseCount + 1;
  FProjProperties.AuditStatus := 0;
  FStaffData.UpdateDataForNewPhase;
  sPhaseFileName := Format('%s\Phase%d.dat', [TempPath, FProjProperties.PhaseCount]);
  CopyFileOrFolder(GetEmptyDataBaseFileName, sPhaseFileName);
end;

destructor TProjectData.Destroy;
begin
  try
    FCheckers.Free;
    FOtherMeasurePhaseData.Free;
    FOtherMeasureOnceData.Free;
    FPriceMarginBillsData.Free;
    FDetailGLData.Free;
    FProjectGLData.Free;
    FMainListData.Free;
    FSearchData.Free;
    FStaffData.Free;
    FBGLData.Free;
    FDealPaymentData.Free;
    FPhaseCompareData.Free;
    FPhaseData.Free;
    FProjProperties.Free;
    FDealBillsData.Free;
    FBillsBookmarkData.Free;
    FBillsMeasureData.Free;
    FBillsCompileData.Free;
    FBillsData.Free;
    FAttachmentData.Free;
    FUpdator.Free;
    FConnection.Free;
  finally
    DeleteFileOrFolder(FTempFolder);
    DeleteFileOrFolder(FDebugDir);
  end;
  inherited;
end;

function TProjectData.GetBaseDataReadOnly: Boolean;
begin
  if FProjProperties.PhaseCount = 0 then
    Result := False
  else
    Result := not AllowInsert;
end;

function TProjectData.GetAllowInsert: Boolean;
begin
  if FPhaseData.Active then
    Result := FPhaseData.AllowInsert
  else
    Result := True;
end;

function TProjectData.GetMainFileName: string;
begin
  Result := TempPath + 'Main.dat';
end;

function TProjectData.GetProjectFileName: string;
begin
  Result := GetMyProjectsFilePath + FProjectName;
end;

function TProjectData.GetTempPath: string;
begin
  Result := FTempFolder + '\';
end;

procedure TProjectData.LockedDataForReply;
begin
  LockBillsBaseData;
  LockDealPaymentData;
  LockProjectGLData;
  LockDetailGLData;
  FPhaseData.PhaseProperty.FinalAudit := True;
  // 有顺序限制，谨慎修改
  FProjProperties.AuditCompany := FStaffData.FinalStaffCompany;
  FProjProperties.AuditStatus := -1;
  FProjProperties.FinalAuditCount := FProjProperties.PhaseCount;
  FStaffData.LockedDataForReply;
end;

procedure TProjectData.LockedDataForSubmit;
begin
  LockBillsBaseData;
  LockDealPaymentData;
  FProjProperties.AuditCompany := FStaffData.FinalStaffCompany;
  FStaffData.LockedDataForAudit;
end;

procedure TProjectData.Open(AProjRec: TsdDataRecord);
begin
  {Open规则：在打开Phase或者设置PhaseIndex时，会设置多个LookUpDataset，
   故要求须在BillsData、DealPayment打开之后}
  FProjectName := AProjRec.ValueByName('Name').AsString;
  FFileName :=  GetMyProjectsFilePath + AProjRec.ValueByName('FileName').AsString;
  FProjectID := AProjRec.ValueByName('ID').AsInteger;
  FWebID := AProjRec.ValueByName('WebID').AsInteger;
  FWebOwnerID := AProjRec.ValueByName('WebOwnerID').AsInteger;
  FWebAuthorID := AProjRec.ValueByName('WebAuthorID').AsInteger;

  FAttachmentData.ProjectData := Self;
  FAttachmentData.LoadDatas;

  UpdateSysProgress(5, '正在打开项目');
  UnZipFile(FileName, TempPath);
  UpdateSysProgress(10, '正在打开项目');
  FConnection.Open(MainFileName);
  CheckNewFile(FConnection.Connection);
  UpdateSysProgress(15, '正在升级文件');
  UpdateProjectDataBase;
  UpdateSysProgress(20, '正在读取数据');
  FProjProperties.Open(FConnection.Connection);
  if FIsNewFile then
    FProjProperties.UpdateFlag := 1;
  UpdateOldData;
  ResetFloatDigitView;
  FProjProperties.DecimalManager.ResetLinkViewColumns;
  UpdateSysProgress(25, '正在读取数据');
  FBillsData.Open(FConnection.Connection);
  if FIsNewFile then
    FBillsData.InitBills;
  FBillsCompileData.Open;
  FBillsMeasureData.Open;
  UpdateSysProgress(65, '正在读取数据');

  FBillsBookmarkData.Open;
  UpdateSysProgress(70, '正在读取数据');

  FDealBillsData.Open(FConnection.Connection);
  UpdateSysProgress(80, '正在读取数据');

  FDealPaymentData.Open(FConnection.Connection);
  if FIsNewFile then
    FDealPaymentData.Init;
  UpdateSysProgress(90, '正在读取数据');

  OpenLastPhaseData;
  UpdateSysProgress(140, '正在读取数据');

  // 价差数据应在当期数据打开后打开
  FProjectGLData.Open(FConnection.Connection);
  FDetailGLData.Open(FConnection.Connection);
  FBGLData.Open(FConnection.Connection);
  UpdateSysProgress(160, '正在读取数据');

  FStaffData.Open(FConnection.Connection);
  UpdateSysProgress(180, '正在读取数据');

  //FBillsGatherData.RefreshBills;
  FMainListData.Open(FConnection.Connection);
  UpdateSysProgress(190, '正在读取数据');
  FOtherMeasureOnceData.Open(FConnection.Connection);
  FOtherMeasurePhaseData.Open(FConnection.Connection);
  UpdateSysProgress(200, '就绪');

  if _IsDebugView then
  begin
    FDebugDir := GetAppFilePath + 'Debug\' + FProjectName;
    CreateDirectoryInDeep(FDebugDir);
  end;
end;

procedure TProjectData.OpenLastPhaseData;
begin
  if ProjProperties.PhaseCount = 0 then Exit;
  FPhaseIndex := ProjProperties.PhaseCount;
  FProjProperties.PhaseIndex := FPhaseIndex;
  FPhaseData.Open(Format('%sPhase%d.dat', [TempPath, FPhaseIndex]));
  ResetPhaseDataLink;
end;

procedure TProjectData.Save;
begin
  try
    InnerSave;
    ZipFolder(FTempFolder, FileName);
    SaveInfoToManager;
  except
    ErrorMessage('保存数据出错。请重试，或联系纵横客服：企业QQ：800003850   客服热线：(0756)3850888');
  end;
end;

procedure TProjectData.SaveInfoToManager;
var
  InfoRec, PhaseRec: TsdDataRecord;
begin
  InfoRec := ProjectManager.sddProjectsInfo.FindKey('idxID', FProjectID);
  PhaseRec := MainListData.GetPhaseMainRecord(ProjProperties.PhaseCount);
  InfoRec.ValueByName('DealTotalPrice').AsFloat := FBillsData.Settlement[DealIndex];
  InfoRec.ValueByName('Deal_BGLTotalPrice').AsFloat := FBillsData.Settlement[DealIndex] + FBGLData.AllBGLTotalPrice;
  InfoRec.ValueByName('PhaseTotalPrice').AsFloat := PhaseRec.ValueByName('GatherTotalPrice').AsFloat;
  InfoRec.ValueByName('EndDealTotalPrice').AsFloat := PhaseRec.ValueByName('EndDealTotalPrice').AsFloat;
  InfoRec.ValueByName('EndChangeTotalPrice').AsFloat :=
      PhaseRec.ValueByName('EndQcTotalPrice').AsFloat + PhaseRec.ValueByName('EndPcTotalPrice').AsFloat;
  InfoRec.ValueByName('EndTotalPrice').AsFloat := PhaseRec.ValueByName('EndGatherTotalPrice').AsFloat;
  InfoRec.ValueByName('PreTotalPrice').AsFloat := PhaseRec.ValueByName('PreGatherTotalPrice').AsFloat;
  InfoRec.ValueByName('PhasePay').AsFloat := PhaseRec.ValueByName('PhasePay').AsFloat;
  InfoRec.ValueByName('PhaseCount').AsInteger := FProjProperties.PhaseCount;
  InfoRec.ValueByName('AuditStatus').AsInteger := FProjProperties.AuditStatus;
  InfoRec.ValueByName('CommonDigit').AsInteger := FProjProperties.DecimalManager.Common.TotalPrice.Digit;
  InfoRec.ValueByName('DealPayDigit').AsInteger := FProjProperties.DecimalManager.DealPay.TotalPrice.Digit;
  ProjectManager.CalculateParentInfo(InfoRec.ValueByName('ParentID').AsInteger);
  ProjectManager.Save;
end;

procedure TProjectData.SetPhaseIndex(const Value: Integer);

  function GetPhaseFileName: string;
  begin
    Result := Format('%s\Phase%d.dat', [TempPath, FPhaseIndex]);
  end;

  procedure ReCreatePhaseData(AOrgPhaseIndex: Integer);
  begin
    if (FPhaseData.Active) and (AOrgPhaseIndex = ProjProperties.PhaseCount) then
      FPhaseData.Save;
    FPhaseData.Free;
    FBillsMeasureData.FreeTreeNodeStageRec;
    FPhaseData := TPhaseData.Create(Self);
  end;

var
  iOrgPhaseIndex: Integer;
begin
  SaveLastestPhaseMainData;
  FProjectGLData.Save;
  FOtherMeasurePhaseData.Save;

  iOrgPhaseIndex := FPhaseIndex;
  FPhaseIndex := Value;
  ProjProperties.PhaseIndex := FPhaseIndex;
  ReCreatePhaseData(iOrgPhaseIndex);
  FPhaseData.Open(GetPhaseFileName);
  ResetPhaseDataLink;
  // 须保存项目工料数据，重新加载当期的项目工料数据
  FProjectGLData.LoadCurPhaseInfoPrice;
  FProjectGLData.LoadStagePM_CalcData;
  FProjectGLData.RefreshGatherData;
  // 须保存其他台账--分期计量数据
  FOtherMeasurePhaseData.LoadCurStageData;
  //BillsGatherData.RefreshBills;
end;

procedure TProjectData.SetPhaseIndexSimple(AIndex: Integer);
begin
  FPhaseIndex := AIndex;
  if FPhaseData.Active then
    FPhaseData.SimpleSave;
  FPhaseData.Free;
  FPhaseData := TPhaseData.Create(Self);
  FPhaseData.SimpleOpen(Format('%s\Phase%d.dat', [TempPath, FPhaseIndex]));
end;

procedure TProjectData.UpdateProjectDataBase;
const
  sHint = '标段文件(%s)高于当前软件支持：' + #13#10 +
          '专业版：请升级软件；' + #13#10 +
          '云版：请联系纵横客服，确认是否可升级软件。';
begin
  if TEncryptConnection(FConnection).OverExe then
    WarningMessage(Format(sHint, [TEncryptConnection(FConnection).CurFileVersion]));
  FUpdator.Update(FConnection);
end;

procedure TProjectData.ResetPhaseDataLink;
begin
  BillsMeasureData.ResetPhaseStageLink;
  BillsMeasureData.ResetTreeNodeStageRec;
  DealPaymentData.ResetPhaseLink;
  BillsBookmarkData.ResetPhaseStageLink;
end;

procedure TProjectData.SimpleOpen(const AFileName: string);
begin
  FProjectID := -1;
  UnZipFile(AFileName, TempPath);
  FConnection.Open(MainFileName);
  UpdateProjectDataBase;
  FProjProperties.Open(FConnection.Connection);
  if ProjProperties.PhaseCount > 0 then
  begin
    FPhaseIndex := ProjProperties.PhaseCount;
    FPhaseData.SimpleOpen(Format('%sPhase%d.dat', [TempPath, FPhaseIndex]));
  end;
end;

procedure TProjectData.SimpleSaveAs(const AFileName: string);
begin
  if FPhaseData.Active then
    FPhaseData.SimpleSave;
  FProjProperties.Save;
  FConnection.Save;
  ZipFolder(FTempFolder, AFileName);
end;

procedure TProjectData.UpdateDataForReceive;
begin
  UpdatePhaseData;
end;

procedure TProjectData.UpdatePhaseData;

  function GetUpdateGLPriceSql(AAuditStatus, APhaseCount: Integer): string;
  const
    vFields: array [0..5] of String = ('PM_Quantity', 'PM_TotalPrice', 'PAL_UsedQuantity', 'PAL_UsedTotalPrice', 'PAL_DeltaPrice', 'PAL_Total');
    sUpdateSql = 'Update GLPrice Set %s Where PhaseID = %d';
    {sUpdateSql = 'Update GLPrice Set PM_Quantity%d = PM_Quantity%d, PM_TotalPrice%d = PM_TotalPrice%d,'+
                 '    PAL_UsedQuantity%d = PAL_UsedQuantity%d, PAL_UsedTotalPrice%d = PAL_UsedTotalPrice%d,'+
                 '    PAL_DeltaPrice%d = PAL_DeltaPrice%d, PAL_Total%d = PAL_Total%d'+
                 '  Where PhaseID = %d';}
  var
    sField: string;
    i: Integer;
  begin
    sField := '';
    for i := Low(vFields) to High(vFields) do
    begin
      if i = High(vFields) then
        sField := sField + Format('%s%d = %s%d', [vFields[i], AAuditStatus, vFields[i], AAuditStatus-1])
      else
        sField := sField + Format('%s%d = %s%d, ', [vFields[i], AAuditStatus, vFields[i], AAuditStatus-1])
    end;
    Result := Format(sUpdateSql, [sField, APhaseCount]);
  end;

  procedure UpdateGLPriceData;
  var
    sSql: string;
  begin
    if (ProjProperties.PhaseCount < 1) or (ProjProperties.AuditStatus < 1) then Exit;

    sSql := GetUpdateGLPriceSql(ProjProperties.AuditStatus, ProjProperties.PhaseCount);
    ExecuteSql(sSql);
  end;

  procedure UpdateOMPhaseDetailData;
  const
    sUpdateSql = 'Insert Into OMPhaseDetail (ID, PhaseID, StageID,' +
                 '    PreTotalPrice, CurTotalPrice, EndTotalPrice)' +
                 '  Select ID, %d, %d, PreTotalPrice, CurTotalPrice, EndTotalPrice' +
                 '  From OMPhaseDetail Where (PhaseID = %d) and (StageID = -1)';
  begin
    if (ProjProperties.PhaseCount > 0) and (ProjProperties.AuditStatus > 0) then
      ExecuteSql(Format(sUpdateSql, [FPhaseIndex, FProjProperties.AuditStatus, FPhaseIndex]));
  end;

var
  iPhase: Integer;
begin
  FProjProperties.AuditStatus := FProjProperties.AuditStatus + 1;
  for iPhase := FProjProperties.FinalAuditCount + 1 to FProjProperties.PhaseCount do
  begin
    SetPhaseIndexSimple(iPhase);
    PhaseData.CreateNewAuditData;
    StaffData.UpdateDataForNewAudit;
    UpdateGLPriceData;
    UpdateOMPhaseDetailData;
  end;
end;

function TProjectData.ReplyProject(const AFileName: string = ''): Boolean;
var
  Replyor: TReplyProject;
begin
  Replyor := TReplyProject.Create(FProjectName, FFileName, FProjectID);
  try
    if AFileName = '' then
      Result := Replyor.Execute
    else
      Result := Replyor.ExportTo(AFileName);
  finally
    Replyor.Free;
  end;
end;

function TProjectData.SubmitProject(const AFileName: string = ''): Boolean;
var
  Submitor :TSubmitProject;
begin
  Submitor := TSubmitProject.Create(FProjectName, FFileName, FProjectID);
  try
    if AFileName = '' then
      Result := Submitor.Execute
    else
      Result := Submitor.ExportTo(AFileName);
  finally
    Submitor.Free;
  end;
end;

procedure TProjectData.ExportJson_Bills(const AFileName: string);

  function GetProjectName: string;
  var
    vNode: tsdIDTreeNode;
  begin
    vNode := ProjectManager.ProjectsTree.FindNode(FProjectID).Parent;
    Result := vNode.Rec.ValueByName('Name').AsString;
  end;


  // lkJSON 暂时未找到添加数组结构的办法，官方也没有提供相关的Demo，自己合成。
  // lkJSON 合成的长文本自动带有大量“\”转义字符，这点有些烦人。
  // 其实这么折腾，还不如自己直接合成。那为什么还要用它？自己写是很容易，但是
  // 要自己读JSON，那写起来就很麻烦了。
  function BillsStr: string;
  var vRec: TsdDataRecord;
    i: Integer;
    sSplit: string;

    function v(AFieldName: string): string;
    begin
      Result := vRec.ValueByName(AFieldName).AsString;
    end;

    // 杰哥那头不识别中文，将中文转成URL编码形式
    function URLEncode(const S: string; const InQueryString: Boolean): string;
    var
      Idx: Integer;
    begin
      Result := '';
      for Idx := 1 to Length(S) do
      begin
        case S[Idx] of
          'A'..'Z', 'a'..'z', '0'..'9', '-', '_', '.':
            Result := Result + S[Idx];
          ' ':
            if InQueryString then
              Result := Result + '+'
            else
              Result := Result + '%20';
        else
            Result := Result + '%' + SysUtils.IntToHex(Ord(S[Idx]), 2);
        end;
      end;
    end;

  begin
    for i := 0 to BillsMeasureData.BillsMeasureTree.Count - 1 do
    begin
      vRec := BillsMeasureData.BillsMeasureTree.Items[i].Rec;
      if (i mod 100) = 0 then
        ProgressProRun('生成汇总数据... ' + IntToStr(i), 0, pmtEdit, pptSet);
      if i = 0 then
        sSplit := ''
      else
        sSplit := ',';
      Result := Result + sSplit + Format('{"Code":"%s","B_Code":"%s","Name":"%s",' +
        '"Units":"%s","Price":"%s","Quantity":"%s","TotalPrice":"%s"}',
        [v('Code'), v('B_Code'), v('Name'), v('Units'), v('Price'),
        v('Quantity'), v('TotalPrice')]);
    end;
  end;

var
  fPhasePay: Double;
  vSL: TStringList;
begin
  vSL := TStringList.Create;
  try
    vSL.Text := Format('{"DealTotalPrice":"%s","Bills":[%s]}',
      [FloatToStr(FBillsData.Settlement[DealIndex]), AnsiToUtf8(BillsStr)]);
    vSL.SaveToFile(AFileName);
  finally
    vSL.Free;
  end;
end;

procedure TProjectData.DisConnectTree;
begin
  BillsMeasureData.BillsMeasureTree.Active := False;
  BillsCompileData.BillsCompileTree.Active := False;
end;

procedure TProjectData.ReConnectTree;
begin
  BillsCompileData.ReConnectTree;
  BillsMeasureData.ReConnectTree;
end;

procedure TProjectData.CopyPhaseCompleteData;
const
  sInsertSql = 'Insert Into PhaseComplete (BillsID)' +
               '  Select ID' +
               '  From Bills where Bills.CreatePhaseID = %d';
  sUpdateSql = 'Update PhaseComplete Inner Join [Bills]' +
               '  On PhaseComplete.BillsID=Bills.ID' +
               '  Set PhaseComplete.Quantity%d=Bills.AddGatherQuantity,' +
               '      PhaseComplete.TotalPrice%d=Bills.AddGatherTotalPrice';
var
  iPhase: Integer;
  sSql: string;
begin
  for iPhase := FProjProperties.FinalAuditCount + 1 to FProjProperties.PhaseCount do
  begin
    SetPhaseIndexSimple(iPhase);
    // 插入本期新增的数据
    sSql := Format(sInsertSql, [iPhase]);
    ExecuteSql(sSql);
    // 更新所有截止本期完成计量数据
    sSql := Format(sInsertSql, [iPhase, iPhase]);
    ExecuteSql(sSql);
  end;
end;

procedure TProjectData.CopyPhaseData;

  procedure CopyStageData(const AFileName, ASourceTable, AResultTable: string);
  const
    sCopySql = 'Select BillsID, DealQuantity, DealTotalPrice, QcQuantity, QcTotalPrice, QcBGLCode, QcBGLNum,' +
               '    PcQuantity, PcTotalPrice, PcBGLCode, PcBGLNum, GatherQuantity, GatherTotalPrice,' +
               '    EndDealQuantity, EndDealTotalPrice, EndQcQuantity, EndQcTotalPrice,' +
               '    EndPcQuantity, EndPcTotalPrice, EndGatherQuantity, EndGatherTotalPrice,' +
               '    PreDealQuantity, PreDealTotalPrice, PreQcQuantity, PreQcTotalPrice,' +
               '    PrePcQuantity, PrePcTotalPrice, PreGatherQuantity, PreGatherTotalPrice' +
               '  Into %s' +
               '  From %s' +
               '  In ''%s''';
  var
    sSql: string;
  begin
    sSql := Format(sCopySql, [AResultTable, ASourceTable, AFileName]);
    ExecuteSql(sSql);
  end;

  procedure CopyEmptyStageData(const AFileName, ASourceTable, AResultTable: string);
  const
    sCopySql = 'Select BillsID, DealQuantity, DealTotalPrice, QcQuantity, QcTotalPrice, QcBGLCode, QcBGLNum,' +
               '    PcQuantity, PcTotalPrice, PcBGLCode, PcBGLNum, GatherQuantity, GatherTotalPrice,' +
               '    EndDealQuantity, EndDealTotalPrice, EndQcQuantity, EndQcTotalPrice,' +
               '    EndPcQuantity, EndPcTotalPrice, EndGatherQuantity, EndGatherTotalPrice,' +
               '    PreDealQuantity, PreDealTotalPrice, PreQcQuantity, PreQcTotalPrice,' +
               '    PrePcQuantity, PrePcTotalPrice, PreGatherQuantity, PreGatherTotalPrice' +
               '  Into %s' +
               '  From %s' +
               '  In ''%s''' +
               '  Where 1=2';
  var
    sSql: string;
  begin
    sSql := Format(sCopySql, [AResultTable, ASourceTable, AFileName]);
    ExecuteSql(sSql);
  end;

  procedure AddSettlementData;
  const
    sAddSql = 'Insert Into P_Stage (BillsID,' +
              '    DealTotalPrice, QcTotalPrice, PcTotalPrice, GatherTotalPrice,' +
              '    EndDealTotalPrice, EndQcTotalPrice, EndPcTotalPrice, EndGatherTotalPrice,' +
              '    PreDealTotalPrice, PreQcTotalPrice, PrePcTotalPrice, PreGatherTotalPrice)' +
              '  Values (-2,'+
              '    %f, %f, %f, %f,'+
              '    %f, %f, %f, %f,'+
              '    %f, %f, %f, %f)';
  var
    sSql: string;
  begin
    with PhaseData.StageData do
      sSql := Format(sAddSql,
          [StageSettlement[1,1], StageSettlement[1,2], StageSettlement[1,3], StageSettlement[1,4],
           StageSettlement[2,1], StageSettlement[2,2], StageSettlement[2,3], StageSettlement[2,4],
           StageSettlement[3,1], StageSettlement[3,2], StageSettlement[3,3], StageSettlement[3,4]]);
    ExecuteSql(sSql);
  end;

  procedure CopyZJJLBillsData;
  var
    sSql: string;
  begin
    sSql := 'Select PZ.ID, B.B_Code, B.Name, B.Units, B.Price, PS.GatherQuantity As Quantity, PS.GatherTotalPrice As TotalPrice' +
            '  Into P_ZJJLBills'+
            '  From Bills As B, P_Stage As PS, P_ZJJL As PZ' +
            '  Where (PZ.BillsID = B.LeafXmjParentID) And (B.ID = PS.BillsID) And (B.IsLeaf=True)';
    ExecuteSql(sSql);
    sSql := 'Select PZD.ID, PZD.BillsID, B.Quantity As Quantity, B.TotalPrice As TotalPrice,' +
            '    PS.DealQuantity As DealQuantity, PS.DealTotalPrice As DealTotalPrice,' +
            '    PS.QcQuantity As QcQuantity, PS.QcTotalPrice As QcTotalPrice,' +
            '    PS.GatherQuantity As GatherQuantity, PS.GatherTotalPrice As GatherTotalPrice,' +
            '    PS.PreDealQuantity As PreDealQuantity, PS.PreDealTotalPrice As PreDealTotalPrice,' +
            '    PS.PreQcQuantity As PreQcQuantity, PS.PreQcTotalPrice As PreQcTotalPrice,' +
            '    PS.PreGatherQuantity As PreGatherQuantity, PS.PreGatherTotalPrice As PreGatherTotalPrice,' +
            '    PS.EndDealQuantity As EndDealQuantity, PS.EndDealTotalPrice As EndDealTotalPrice,' +
            '    PS.EndQcQuantity As EndQcQuantity, PS.EndQcTotalPrice As EndQcTotalPrice,' +
            '    PS.EndGatherQuantity As EndGatherQuantity, PS.EndGatherTotalPrice As EndGatherTotalPrice' +
            '  Into P_ZJJL_DetailBills' +
            '  From Bills As B, P_Stage As PS, P_ZJJL_Detail As PZD' +
            '  Where (PZD.BillsID = PS.BillsID) And (B.ID = PZD.BillsID)';
    ExecuteSql(sSql);
  end;

  procedure CopyZJJLData(const AFileName: string);
  var
    sSql: string;
  begin
    sSql := 'Select ID, BillsID, GatherBillsID, Code, CertificateCode, BillsCode, FormulaMemo, RelaFile,' +
            '    BGLCode, PegName, FBFXName, BeginPeg, EndPeg, UnitName, DrawingCode' +
            '  Into P_ZJJL' +
            '  From ' + PhaseData.ZJJLData.sdpZJJL.TableName +
            '  In ' + Format('''%s''', [AFileName]);
    ExecuteSql(sSql);
    sSql := 'Select ID, BillsID' +
            '  Into P_ZJJL_Detail' +
            '  From ' + PhaseData.ZJJLData.sdpZJJLDetail.TableName +
            '  In ' + Format('''%s''', [AFileName]);
    ExecuteSql(sSql);
    CopyZJJLBillsData;
  end;

  procedure CopyPhasePayData(const AFileName: string);
  const
    sCopySql = 'Select ID, TotalPrice%d As CurTotalPrice, EndTotalPrice%d As EndTotalPrice,' +
               '    PreTotalPrice%d As PreTotalPrice,' +
               '    TotalPrice0, EndTotalPrice0, PreTotalPrice0,' +
               '    TotalPrice1, EndTotalPrice1, PreTotalPrice1,' +
               '    TotalPrice2, EndTotalPrice2, PreTotalPrice2,' +
               '    TotalPrice3, EndTotalPrice3, PreTotalPrice3,' +
               '    TotalPrice4, EndTotalPrice4, PreTotalPrice4,' +
               '    TotalPrice5, EndTotalPrice5, PreTotalPrice5,' +
               '    TotalPrice6, EndTotalPrice6, PreTotalPrice6,' +
               '    TotalPrice7, EndTotalPrice7, PreTotalPrice7,' +
               '    TotalPrice8, EndTotalPrice8, PreTotalPrice8,' +
               '    TotalPrice9, EndTotalPrice9, PreTotalPrice9,' +
               '    TotalPrice10, EndTotalPrice10, PreTotalPrice10,' +
               '    TotalPrice11, EndTotalPrice11, PreTotalPrice11,' +
               '    TotalPrice12, EndTotalPrice12, PreTotalPrice12,' +
               '    TotalPrice13, EndTotalPrice13, PreTotalPrice13,' +
               '    TotalPrice14, EndTotalPrice14, PreTotalPrice14,' +
               '    TotalPrice%d As TotalPrice_F, EndTotalPrice%d As EndTotalPrice_F, PreTotalPrice%d As PreTotalPrice_F' +
               '  Into P_PhasePay' +
               '  From PhasePay' +
               '  In ''%s''';
  var
    sSql: string;
  begin
    with PhaseData do
      sSql := Format(sCopySql, [StageIndex, StageIndex, StageIndex, StageCount - 1, StageCount - 1, StageCount - 1, AFileName]);
    ExecuteSql(sSql);
  end;

  procedure CopyReportData(const AFileName: string);
  const
    sCopySql = 'Select Flag, SubFlag, SerialNo, Select1, Result1, Result2' +
               '  Into P_ReportData' +
               '  From ReportData' +
               '  In ''%s''';
  begin
    ExecuteSql(Format(sCopySql, [AFileName]));
  end;

  procedure CopyCurPhaseData;
  var
    sTempFile: string;
    i: Integer;
  begin
    sTempFile := GetTempFileName;
    try
      FPhaseData.SaveDebugFile(sTempFile);
      // 复制当前阶段数据
      CopyStageData(sTempFile, PhaseData.StageData.sdpStage.TableName, 'P_Stage');
      // 复制原报、审核、批复数据
      // 其中审核、批复数据，如果存在则复制，如果不存在，则创建空表
      CopyStageData(sTempFile, 'Refer', 'P_Refer');
      for i := 1 to iMaxStageCount - 1 do
        if PhaseData.AuditCount >= i then
          CopyStageData(sTempFile, PhaseData.StageTableName[i],
              'P_Audit' + IntToStr(i))
        else
          CopyEmptyStageData(sTempFile, PhaseData.StageTableName[PhaseData.AuditCount],
              'P_Audit' + IntToStr(i));
      if PhaseData.StageCount > 1 then
        CopyStageData(sTempFile, PhaseData.StageTableName[PhaseData.AuditCount], 'P_Reply')
      else
        CopyEmptyStageData(sTempFile, PhaseData.StageTableName[PhaseData.AuditCount], 'P_Reply');

      AddSettlementData;
      CopyZJJLData(sTempFile);
      CopyPhasePayData(sTempFile);
      CopyReportData(sTempFile);
    finally
      DeleteFile(sTempFile);
    end;
  end;

  procedure CopyHistoryCompleteData;
  const
    sCopySql1 = 'Select BillsID, 0 As Quantity1, 0 As TotalPrice1,' +
                '    Quantity%d As Quantity2, TotalPrice%d As TotalPrice2' +
                '  Into P_Complete' +
                '  From PhaseComplete';
    sCopySqlN = 'Select BillsID, Quantity%d As Quantity1, TotalPrice%d As TotalPrice1,' +
                '    Quantity%d As Quantity2, TotalPrice%d As TotalPrice2' +
                '  Into P_Complete' +
                '  From PhaseComplete';
    sUnionCopySql1 = 'Select BillsID, 0 As Quantity1, 0 As TotalPrice1,' +
                     '    GatherQuantity As Quantity2, GatherTotalPrice As TotalPrice2' +
                     '  Into P_Complete' +
                     '  From P_Stage';
    sUnionCopySqlN = 'Select PS.BillsID As BillsID,' +
                     '   PC.Quantity%d As Quantity1,' +
                     '   PC.TotalPrice%d As TotalPrice1,' +
                     '   PC.Quantity%d + PS.GatherQuantity As Quantity2,' +
                     '   PC.TotalPrice%d + PS.GatherTotalPrice As TotalPrice2' +
                     '  Into P_Complete' +
                     '  From PhaseComplete As PC, P_Stage As PS';
  var
    sSql: string;
  begin
    if (ProjProperties.FinalAuditCount >= PhaseIndex) then
      if PhaseIndex <= 1 then
        sSql := Format(sCopySql1, [FPhaseIndex, FPhaseIndex])
      else
        sSql := Format(sCopySqlN, [PhaseIndex - 1, PhaseIndex - 1, PhaseIndex, PhaseIndex])
    else
      if PhaseIndex <= 1 then
        sSql := sUnionCopySql1
      else
        sSql := Format(sUnionCopySqlN, [PhaseIndex - 1, PhaseIndex - 1, PhaseIndex - 1, PhaseIndex - 1]);
    ExecuteSql(sSql);
  end;

  procedure UpdateBillsByDealBills;
  const
    sClearSql = 'Update Bills Set GclDealQuantity = 0, GclDealTotalPrice = 0';
    sUpdateSql = 'Update Bills As B, DealBills As D' +
                 '    Set B.GclDealQuantity = D.Quantity, B.GclDealTotalPrice = D.TotalPrice' +
                 '  Where (B.B_Code = D.B_Code) and (B.Name = D.Name) and (B.Units = D.Units) and (B.Price = D.Price)';
  begin
    ExecuteSql(sClearSql);
    ExecuteSql(sUpdateSql);
  end;

  procedure FilterDealBillsByBills;
  const
    sFilterSql = 'Select D.*' +
                 '  Into P_FilterDealBills' +
                 '  From DealBills As D inner join' +
                 '    (Select D.ID' +
                 '       From DealBills As D Left join Bills As B' +
                 '       On (D.B_Code = B.B_Code) and (D.Name = B.Name) and (D.Units = B.Units) and (D.Price = B.Price)' +
                 '     where B.ID is Null) As R' +
                 '  On (D.ID = R.ID)';
  begin
    ExecuteSql(sFilterSql);
  end;

  procedure CopyCacheReportsData;
  begin
    // DealBills的数量金额填至Bills中
    UpdateBillsByDealBills;
    // 过滤DealBills中在Bills中不存在的清单
    FilterDealBillsByBills;
  end;

  procedure SaveCurPhaseCheckers;
  const
    sCreateSql = 'Create Table P_Checkers (CheckerNo Integer NOT NULL, Name Text(50), Role Text(50), MemoStr Text(255), CheckedDateTime Text(20), Flag Integer,'+
                 '  CONSTRAINT PrimaryKey PRIMARY KEY (CheckerNo, Flag))';
    sInsertSql = 'Insert Into P_Checkers (CheckerNo, Name, Role, MemoStr, CheckedDateTime, Flag) Values (%d, ''%s'', ''%s'', ''%s'', ''%s'', %d)';
  var
    i: Integer;
    vChecker: TChecker;
    sSql: string;
  begin
    ExecuteSql(sCreateSql);
    // 全部审核人
    for i := 0 to Checkers.Count - 1 do
    begin
      vChecker := Checkers.Item[i];
      sSql := Format(sInsertSql, [vChecker.No, vChecker.Name, vChecker.Role, vChecker.Memo, vChecker.CheckedDateTime, 0]);
      ExecuteSql(sSql);
    end;
    // 审核通过的最后一人
    vChecker := Checkers.LastChecker;
    if Assigned(vChecker) then
      sSql := Format(sInsertSql, [vChecker.No, vChecker.Name, vChecker.Role, vChecker.Memo, vChecker.CheckedDateTime, 1])
    else
      sSql := Format(sInsertSql, [-1, '', '', '', '', 1]);
    ExecuteSql(sSql);
  end;

  procedure SaveCloudInfo;
  begin
    SaveCurPhaseCheckers;
  end;

begin
  AppendProjectLog('Display Reports Prepare');

  if ASaveBeforeCopy then
    InnerSave;
  ClearReportCacheData;
  CopyCacheReportsData;
  if FPhaseIndex > 0 then
    CopyCurPhaseData;
  FDealPaymentData.UpdateLinkSerialNo;
  //CopyHistoryCompleteData;
  if _IsCloud then
    SaveCloudInfo;
  if _IsDebugView then
    SaveDebugFile('Report.dat');

  MeasureLog.AppendLogTo('Display Reports Prepare --> Pass');
end;

procedure TProjectData.ExecuteSql(const ASql: string);
var
  FQuery: TADOQuery;
begin
  FQuery := TADOQuery.Create(nil);
  try
    FQuery.Connection := FConnection.Connection;
    FQuery.SQL.Clear;
    FQuery.SQL.Add(ASql);
    FQuery.ExecSQL;
  finally
    FQuery.Free;
  end;
end;

function TProjectData.GetADOConnection: TADOConnection;
begin
  Result := FConnection.Connection;
end;

procedure TProjectData.ExportJson_Common(const AFileName: string);
var
  Rec: TsdDataRecord;
  vSL: TStringList;
  sBQHTJL, sBQSLBGJL, sJZSQLJWC, sBQWCJL, sLJWCJL, sTotalPrice: string;
begin
  vSL := TStringList.Create;
  try
    Rec := MainListData.GetPhaseMainRecord(ProjProperties.PhaseCount);

    sBQHTJL       := FloatToStr(Rec.ValueByName('DealTotalPrice').AsFloat);  // 本期合同计量
    sBQSLBGJL     := FloatToStr(Rec.ValueByName('QcTotalPrice').AsFloat);  // 本期数量变更计量
    sJZSQLJWC     := FloatToStr(Rec.ValueByName('PreGatherTotalPrice').AsFloat);  // 截止上期累计完成
    sBQWCJL       := FloatToStr(Rec.ValueByName('GatherTotalPrice').AsFloat);  // 本期完成计量
    sLJWCJL       := FloatToStr(Rec.ValueByName('EndGatherTotalPrice').AsFloat);  // 累计完成计量
    sTotalPrice   := FloatToStr(BillsData.Settlement[0] + Rec.ValueByName('EndQcTotalPrice').AsFloat);  // 0号台帐+截止本期累期变更计量
    vSL.Text := Format('{"BQHTJL":"%s","BQSLBGJL":"%s","JZSQLJWC":"%s","BQWCJL":"%s","LJWCJL":"%s","TotalPrice":"%s"}',
      [sBQHTJL, sBQSLBGJL, sJZSQLJWC, sBQWCJL, sLJWCJL, sTotalPrice]);
    vSL.SaveToFile(AFileName);
  finally
    vSL.Free;
  end;
end;

function TProjectData.CurUserIsAuthor: Boolean;
begin
  Result := PHPWeb.UserID = WebAuthorID;
end;

function TProjectData.CurUserIsChecker: Boolean;
begin
  Result := (PHPWeb.UserID <> WebOwnerID) and (PHPWeb.UserID <> WebAuthorID);
end;

function TProjectData.CurUserIsOwner: Boolean;
begin
  Result := PHPWeb.UserID = WebOwnerID;
end;

procedure TProjectData.SaveLastestPhaseMainData;
var
  Rec: TsdDataRecord;
begin
  if (FPhaseIndex = ProjProperties.PhaseCount) and PhaseData.IsLastStage then
  begin
    Rec := MainListData.GetPhaseMainRecord(FPhaseIndex);
    Rec.ValueByName('DealTotalPrice').AsFloat := PhaseData.StageData.StageSettlement[1, 1];
    Rec.ValueByName('QcTotalPrice').AsFloat := PhaseData.StageData.StageSettlement[1, 2];
    Rec.ValueByName('PcTotalPrice').AsFloat := PhaseData.StageData.StageSettlement[1, 3];
    Rec.ValueByName('GatherTotalPrice').AsFloat := PhaseData.StageData.StageSettlement[1, 4];
    Rec.ValueByName('EndDealTotalPrice').AsFloat := PhaseData.StageData.StageSettlement[2, 1];
    Rec.ValueByName('EndQcTotalPrice').AsFloat := PhaseData.StageData.StageSettlement[2, 2];
    Rec.ValueByName('EndPcTotalPrice').AsFloat := PhaseData.StageData.StageSettlement[2, 3];
    Rec.ValueByName('EndGatherTotalPrice').AsFloat := PhaseData.StageData.StageSettlement[2, 4];
    Rec.ValueByName('PreDealTotalPrice').AsFloat := PhaseData.StageData.StageSettlement[3, 1];
    Rec.ValueByName('PreQcTotalPrice').AsFloat := PhaseData.StageData.StageSettlement[3, 2];
    Rec.ValueByName('PrePcTotalPrice').AsFloat := PhaseData.StageData.StageSettlement[3, 3];
    Rec.ValueByName('PreGatherTotalPrice').AsFloat := PhaseData.StageData.StageSettlement[3, 4];
    Rec.ValueByName('PhasePay').AsFloat := PhaseData.PhasePayData.LastestPhasePay[1];
    Rec.ValueByName('EndPhasePay').AsFloat := PhaseData.PhasePayData.LastestPhasePay[2];
    Rec.ValueByName('PrePhasePay').AsFloat := PhaseData.PhasePayData.LastestPhasePay[3];
  end;
end;

procedure TProjectData.CalculateAll;
begin
  FBillsCompileData.CalculateAll; //台账
  FProjectGLData.CalculateAll; //工料价差
  FPhaseData.StageData.CalculateAll; //计量&清单价差
  FBillsMeasureData.CalculateAll; //累计
  FPhaseData.PhasePayData.CalculateAll; // 合同支付
  FOtherMeasurePhaseData.CalculateAll;
end;

procedure TProjectData.ImportCloudTenderFile(const AFileName: string);


  function GetTempFile(const TempDir: string): string;
  var
    FXmlDocument: IXMLDocument;
    XmlNode, InfoXmlNode: IXMLNode;
    ChildNodes: IXMLNodeList;
  begin
    FXmlDocument := TXMLDocument.Create(nil) as IXMLDocument;
    try
      FXmlDocument.LoadFromFile(TempDir + '\Info.xml');
      FXmlDocument.Options := [doNodeAutoCreate,doNodeAutoIndent,doAutoPrefix,doNamespaceDecl];
      XmlNode := FXmlDocument.DocumentElement;
      ChildNodes := XmlNode.ChildNodes;
      InfoXmlNode := ChildNodes.FindNode('ProjectInfo');
      Result := TempDir + '\' + InfoXmlNode.Attributes['FileName'];
    finally
      FXmlDocument := nil;
    end;
  end;

  procedure ClearAllData;
  var
    sSql: string;
  begin
    sSql := 'Delete * From Bills';
    ExecuteSql(sSql);
    sSql := 'Delete * From DealBills';
    ExecuteSql(sSql);
    sSql := 'Delete * From ProjProperties';
    ExecuteSql(sSql);
    sSql := 'Delete * From DealPayment';
    ExecuteSql(sSql);
  end;

  procedure CopyData(const AFileName: string);
  const
    sBillsSql = 'Insert Into Bills (ID, ParentID, NextSiblingID,' +
                '    Code, B_Code, Name, Units, Alias, Price, NewPrice,' +
                '    OrgQuantity, OrgTotalPrice, MisQuantity, MisTotalPrice, OthQuantity, OthTotalPrice,' +
                '    CalcType,' +
                '    DgnQuantity1, DgnQuantity2,'+
                '    Peg, DrawingCode, MemoStr, HasBookMark, MarkMemo, ApprovalCode)'+
                '  Select ID, ParentID, NextSiblingID,'+
                '    Code, B_Code, Name, Units, Alias, Price, NewPrice,' +
                '    OrgQuantity, OrgTotalPrice, MisQuantity, MisTotalPrice, OthQuantity, OthTotalPrice,' +
                '    CalcType,' +
                '    DgnQuantity1, DgnQuantity2,'+
                '    Peg, DrawingCode, MemoStr, HasBookMark, MarkMemo, ApprovalCode'+
                '  From Bills In ''%s''';

    sDealBillsSql = 'Insert Into DealBills Select ID, B_Code, Name, Units, Price, Quantity, TotalPrice'+
                    '  From DealBills In ''%s''';

    sDealPaymentSql = 'Insert Into DealPayment (ID, Name, CalcType, IsMinus,'+
                      '    Formula, StartedPrice, SFormula, RangePrice, RFormula)'+
                      '  Select ID, Name, CalcType, IsMinus,'+
                      '    Formula, StartedPrice, SFormula, RangePrice, RFormula'+
                      '  From DealPayment In ''%s''';

    sPropertySql = 'Insert Into ProjProperties'+
                   '  Select * From ProjProperties In ''%s'''+
                   '  Where (Name <> ''PHASECOUNT'') and (Name <> ''UNLOCKINFOPASSWORD'') and (Name <> ''AUDITSTATUS'')'+
                   '    and (Name <> ''FINALAUDITCOUNT'') and (Name <> ''AUDITCOMPANY'') and (Name <> ''UPDATEFLAG'')';
  var
    sSql: string;
  begin
    sSql := Format(sBillsSql, [AFileName]);
    ExecuteSql(sSql);
    sSql := Format(sDealBillsSql, [AFileName]);
    ExecuteSql(sSql);
    sSql := Format(sDealPaymentSql, [AFileName]);
    ExecuteSql(sSql);
    sSql := Format(sPropertySql, [AFileName]);
    ExecuteSql(sSql);
  end;

  function CreateTempSourceFile: string;
  var
    TempDir, TempDir2: string;
  begin
    TempDir := GenerateTempFolder(GetTempPath);
    UnZipFile(AFileName, TempDir);
    try
      TempDir2 := GenerateTempFolder(GetTempPath);
      try
        UnZipFile(GetTempFile(TempDir), TempDir2);
        Result := GetTempFileName;
        SimpleDecrypt(TempDir2 + '\Main.dat', Result);
      finally
        DeleteFileOrFolder(TempDir2);
      end;
    finally
      DeleteFileOrFolder(TempDir);
    end;
  end;

  procedure BeforeCopyData;
  begin
    DisConnectTree;
    CloseAllData;
  end;

  procedure EndCopyData;
  begin
    OpenAllData;
    FProjProperties.Reload;
    FProjProperties.UpdateFlag := 1;
    ReConnectTree;
    ResetFloatDigitView;
    BillsCompileData.CalculateAll;
  end;

  function CheckFile: Boolean;
  var
    TempDir: string;
    Proj: TProjectData;
  begin
    TempDir := GenerateTempFolder(GetTempPath);
    UnZipFile(AFileName, TempDir);
    try
      Proj := TProjectData.Create;
      Proj.SimpleOpen(GetTempFile(TempDir));
      Result := Proj.ProjProperties.UpdateFlag = 1;
    finally
      Proj.Free;
      DeleteFileOrFolder(TempDir);
    end;
  end;

  procedure UpdateSourceFile(const AFileName: string);
  var
    vCon: TADOConnection;
    vUpdate: TUpdateProjectDB;
  begin
    vCon := TADOConnection.Create(nil);
    vCon.LoginPrompt := False;
    try
      vCon.ConnectionString := Format(SAdoConnectStr, [AFileName]);
      vUpdate := TUpdateProjectDB.Create;
      vUpdate.ForceUpdate(vCon);
    finally
      vUpdate.Free;
      vCon.Free;
    end;
  end;

var
  sTemMainFile: string;
begin
  sTemMainFile := CreateTempSourceFile;
  UpdateSourceFile(sTemMainFile);
  BeforeCopyData;
  try
    ClearAllData;
    CopyData(sTemMainFile);
  finally
    EndCopyData;
    DeleteFileOrFolder(sTemMainFile);
  end;
end;

function TProjectData.CheckPassword: Boolean;
var
  sPassword: string;
begin
  if ProjProperties.UnlockInfoPassword = '' then
    Result := True
  else
  begin
    Result := InputPassword(sPassword);
    if Result then
    begin
      Result := sPassword = ProjProperties.UnlockInfoPassword;
      if not Result then ErrorMessage('您输入的密码不正确！');
    end;
  end;
end;

procedure TProjectData.SetCheckers(const Value: TCheckers);
begin
  FCheckers := Value;
end;

procedure TProjectData.OpenForSubmit(const AFileName: string);
begin
  FProjectID := -1;
  UnZipFile(AFileName, TempPath);
  FConnection.Open(MainFileName);
  UpdateProjectDataBase;
  FProjProperties.Open(FConnection.Connection);
  FStaffData.Open(FConnection.Connection);
end;

procedure TProjectData.SaveAsForSubmit(const AFileName: string);
begin
  FStaffData.Save;
  FProjProperties.Save;
  FConnection.Save;
  ZipFolder(FTempFolder, AFileName);
end;

procedure TProjectData.LockBillsBaseData;
const
  sLockInfoSql = 'Update Bills Set LockedInfo = True, LockedLevel = True';
  sLockNPSql = 'Update Bills Set LockedNewPrice = True Where NewPrice <> 0';
begin
  ExecuteSql(sLockInfoSql);
  ExecuteSql(sLockNPSql);
end;

procedure TProjectData.LockDealPaymentData;
const
  sLockDealSql = 'Update DealPayment Set Locked = True';
  sLockFormulaSql = 'Update DealPayment Set LockedFormula = True Where (Formula <> '''')';
begin
  ExecuteSql(sLockDealSql);
  ExecuteSql(sLockFormulaSql);
end;

procedure TProjectData.OpenForReport(const AFileName: string);
begin
  FProjectID := -1;
  UnZipFile(AFileName, TempPath);
  FConnection.Open(MainFileName);
  UpdateProjectDataBase;
  FProjProperties.Open(FConnection.Connection);
  UpdateOldData;
  FBillsData.Open(FConnection.Connection);
  FBillsCompileData.Open;
  FDealPaymentData.Open(FConnection.Connection);
  FBGLData.Open(FConnection.Connection);
end;

procedure TProjectData.OpenForReply(const AFileName: string);
begin
  FProjectID := -1;
  UnZipFile(AFileName, TempPath);
  FConnection.Open(MainFileName);
  UpdateProjectDataBase;
  FProjProperties.Open(FConnection.Connection);
  if ProjProperties.PhaseCount > 0 then
  begin
    FPhaseIndex := ProjProperties.PhaseCount;
    FPhaseData.SimpleOpen(Format('%sPhase%d.dat', [TempPath, FPhaseIndex]));
  end;
  FStaffData.Open(FConnection.Connection);
  FDetailGLData.Open(FConnection.Connection);
end;

procedure TProjectData.SaveForReply(const AFileName: string);
begin
  FDetailGLData.Save;
  FStaffData.Save;
  if FPhaseData.Active then
    FPhaseData.SimpleSave;
  FProjProperties.Save;
  FConnection.Save;
  ZipFolder(FTempFolder, AFileName);
end;

procedure TProjectData.OpenForReceive(const AFileName: string);
begin
  FProjectID := -1;
  UnZipFile(AFileName, TempPath);
  FConnection.Open(MainFileName);
  UpdateProjectDataBase;
  FProjProperties.Open(FConnection.Connection);
  if ProjProperties.PhaseCount > 0 then
  begin
    FPhaseIndex := ProjProperties.PhaseCount;
    FPhaseData.SimpleOpen(Format('%sPhase%d.dat', [TempPath, FPhaseIndex]));
  end;
  FStaffData.Open(FConnection.Connection);
end;

procedure TProjectData.SaveForReceive(const AFileName: string);
begin
  FStaffData.Save;
  if FPhaseData.Active then
    FPhaseData.SimpleSave;
  FProjProperties.Save;
  FConnection.Save;
  ZipFolder(FTempFolder, AFileName);
end;

procedure TProjectData.CloseAllData;
begin
  FBillsBookmarkData.Close;
  FBillsData.Close;
  FBillsCompileData.Close;
  FBillsMeasureData.Close;
  FDealBillsData.Close;
  FDealPaymentData.Close;
  FBGLData.Close;
  FStaffData.Close;
  FMainListData.Close;
end;

procedure TProjectData.OpenAllData;
begin
  FProjProperties.Open(FConnection.Connection);
  FBillsData.Open(FConnection.Connection);
  FBillsCompileData.Open;
  FBillsMeasureData.Open;
  FDealBillsData.Open(FConnection.Connection);
  FDealPaymentData.Open(FConnection.Connection);
  FBGLData.Open(FConnection.Connection);
  FStaffData.Open(FConnection.Connection);
  FMainListData.Open(FConnection.Connection);
  FBillsBookmarkData.Open;
end;

procedure TProjectData.UpdateOldData;

  procedure UpdateBills_OrgData;
  const
    sUpdateSql = 'Update Bills Set OrgQuantity = Quantity, OrgTotalPrice = TotalPrice';
  begin
    ExecuteSql(sUpdateSql);
  end;

begin
  if ProjProperties.UpdateFlag = 1 then Exit;
  ProjProperties.UpdateFlag := 1;
  UpdateBills_OrgData;
end;

procedure TProjectData.ResetFloatDigitView;

  procedure SetBillsCompileDigit;
  begin
    with FBillsCompileData.sdvBillsCompile do
    begin
      Columns.FindColumn('OrgQuantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('MisQuantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('OthQuantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('Quantity').DisplayFormat := FProjProperties.QuantityFormat;

      Columns.FindColumn('DgnQuantity1').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('DgnQuantity2').DisplayFormat := FProjProperties.QuantityFormat;

      Columns.FindColumn('OrgTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('MisTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('OthTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('TotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;

      Columns.FindColumn('Price').DisplayFormat := FProjProperties.PriceFormat;
      Columns.FindColumn('DgnPrice').DisplayFormat := FProjProperties.PriceFormat;

      Columns.FindColumn('OrgQuantity').EditFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('MisQuantity').EditFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('OthQuantity').EditFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('Quantity').EditFormat := FProjProperties.QuantityFormat;

      Columns.FindColumn('DgnQuantity1').EditFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('DgnQuantity2').EditFormat := FProjProperties.QuantityFormat;

      Columns.FindColumn('OrgTotalPrice').EditFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('MisTotalPrice').EditFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('OthTotalPrice').EditFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('TotalPrice').EditFormat := FProjProperties.TotalPriceFormat;

      Columns.FindColumn('Price').EditFormat := FProjProperties.PriceFormat;
      Columns.FindColumn('DgnPrice').EditFormat := FProjProperties.PriceFormat;
    end;
  end;

  procedure SetBillsMeasureDigit;
  begin
    with FBillsMeasureData.sdvBillsMeasure do
    begin
      Columns.FindColumn('Quantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('CurDealQuantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('CurQcQuantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('CurPcQuantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('CurGatherQuantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('EndDealQuantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('EndQcQuantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('EndPcQuantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('EndGatherQuantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('AddDealQuantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('AddQcQuantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('AddPcQuantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('AddGatherQuantity').DisplayFormat := FProjProperties.QuantityFormat;

      Columns.FindColumn('DealDgnQuantity1').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('DealDgnQuantity2').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('CDgnQuantity1').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('CDgnQuantity2').DisplayFormat := FProjProperties.QuantityFormat;

      Columns.FindColumn('TotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('CurDealTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('CurQcTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('CurPcTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('CurGatherTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('EndDealTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('EndQcTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('EndPcTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('EndGatherTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('AddDealTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('AddQcTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('AddPcTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('AddGatherTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;

      Columns.FindColumn('Price').DisplayFormat := FProjProperties.PriceFormat;
      Columns.FindColumn('NewPrice').DisplayFormat := FProjProperties.PriceFormat;

      Columns.FindColumn('Quantity').EditFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('CurDealQuantity').EditFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('CurQcQuantity').EditFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('CurPcQuantity').EditFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('CurGatherQuantity').EditFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('EndDealQuantity').EditFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('EndQcQuantity').EditFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('EndPcQuantity').EditFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('EndGatherQuantity').EditFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('AddDealQuantity').EditFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('AddQcQuantity').EditFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('AddPcQuantity').EditFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('AddGatherQuantity').EditFormat := FProjProperties.QuantityFormat;

      Columns.FindColumn('DealDgnQuantity1').EditFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('DealDgnQuantity2').EditFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('CDgnQuantity1').EditFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('CDgnQuantity2').EditFormat := FProjProperties.QuantityFormat;

      Columns.FindColumn('TotalPrice').EditFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('CurDealTotalPrice').EditFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('CurQcTotalPrice').EditFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('CurPcTotalPrice').EditFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('CurGatherTotalPrice').EditFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('EndDealTotalPrice').EditFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('EndQcTotalPrice').EditFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('EndPcTotalPrice').EditFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('EndGatherTotalPrice').EditFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('AddDealTotalPrice').EditFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('AddQcTotalPrice').EditFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('AddPcTotalPrice').EditFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('AddGatherTotalPrice').EditFormat := FProjProperties.TotalPriceFormat;

      Columns.FindColumn('Price').EditFormat := FProjProperties.PriceFormat;
      Columns.FindColumn('NewPrice').EditFormat := FProjProperties.PriceFormat;
    end;
  end;

  procedure SetBillsGatherDigit;
  begin
    with FBillsGatherData.sdvGclBills do
    begin
      Columns.FindColumn('Price').DisplayFormat := FProjProperties.PriceFormat;

      Columns.FindColumn('DealQuantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('DealTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('BGLQuantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('BGLTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('Quantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('TotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;

      Columns.FindColumn('CurDealQuantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('CurDealTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('CurQcQuantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('CurQcTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('CurGatherQuantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('CurGatherTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;

      Columns.FindColumn('PreDealQuantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('PreDealTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('PreQcQuantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('PreQcTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('PreGatherQuantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('PreGatherTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;

      Columns.FindColumn('AddDealQuantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('AddDealTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('AddQcQuantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('AddQcTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('AddGatherQuantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('AddGatherTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;

      Columns.FindColumn('EndDealQuantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('EndDealTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('EndQcQuantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('EndQcTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('EndGatherQuantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('EndGatherTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;

      Columns.FindColumn('Deal_BGLQuantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('Deal_BGLTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
    end;

    with FBillsGatherData.sdvDetailGclBills do
    begin
      Columns.FindColumn('Quantity').DisplayFormat := FProjProperties.QuantityFormat;
    end;

    with FBillsGatherData.sdvDetailDealBills do
    begin
      Columns.FindColumn('Quantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('TotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
    end;

    with FBillsGatherData.sdvDetailBGLBills do
    begin
      Columns.FindColumn('Quantity').DisplayFormat := FProjProperties.QuantityFormat;
      Columns.FindColumn('TotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
    end;
  end;

  procedure SetDealPaymentDigit;
  begin
    with FDealPaymentData.sdvDealPayment do
    begin
      Columns.FindColumn('CurTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('TotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('StartedPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('RangePrice').DisplayFormat := FProjProperties.TotalPriceFormat;
    end;
  end;

  procedure SetBGLDigit;
  begin
    FBGLData.cdsBGLViewTotalPrice.DisplayFormat := FProjProperties.TotalPriceFormat;
    FBGLData.cdsBGBillsViewPrice.DisplayFormat := FProjProperties.PriceFormat;
    FBGLData.cdsBGBillsViewQuantity.DisplayFormat := FProjProperties.QuantityFormat;
    FBGLData.cdsBGBillsViewTotalPrice.DisplayFormat := FProjProperties.TotalPriceFormat;
    FBGLData.cdsBGBillsViewUsedQuantity.DisplayFormat := FProjProperties.QuantityFormat;
  end;

  procedure SetOtherMeasureDigit;
  begin
    with FOtherMeasureOnceData.sdvOnce do
    begin
      Columns.FindColumn('TotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
    end;
    with FOtherMeasurePhaseData.sdvPhase do
    begin
      Columns.FindColumn('TotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('PreTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('CurTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('EndTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
      Columns.FindColumn('AddTotalPrice').DisplayFormat := FProjProperties.TotalPriceFormat;
    end;
  end;

begin
  SetBillsCompileDigit;
  SetBillsMeasureDigit;
  //SetDealPaymentDigit;
  SetBillsGatherDigit;
  SetBGLDigit;
  SetOtherMeasureDigit;
end;

function TProjectData.GetStageDataReadOnly: Boolean;
begin
  if FPhaseData.Active then
    Result := FPhaseData.StageDataReadOnly
  else
    Result := True;
end;

procedure TProjectData.OpenForReport2(const AFileName: string);
begin
  FProjectID := -1;
  UnZipFile(AFileName, TempPath);
  FConnection.Open(MainFileName);
  UpdateProjectDataBase;
  FProjProperties.Open(FConnection.Connection);
  UpdateOldData;
  FBillsData.Open(FConnection.Connection);
  FBillsCompileData.Open;
  FDealPaymentData.Open(FConnection.Connection);
  FBGLData.Open(FConnection.Connection);
  if ProjProperties.PhaseCount > 0 then
  begin
    FPhaseIndex := ProjProperties.PhaseCount;
    FPhaseData.SimpleOpen(Format('%sPhase%d.dat', [TempPath, FPhaseIndex]));
  end;
end;

function TProjectData.CheckDataBaseInfo(APhaseCount, AAuditStatus: Integer): Boolean;
begin
  Result := (FProjProperties.PhaseCount = APhaseCount)
         and (FProjProperties.AuditStatus = AAuditStatus);
  if Result and (APhaseCount > 0) and (AAuditStatus <> -1) then
    Result := PhaseData.AuditCount = AAuditStatus;
end;

procedure TProjectData.OpenForReport3(const AFileName: string);
begin
  FProjectID := -1;
  UnZipFile(AFileName, TempPath);
  FConnection.Open(MainFileName);
  UpdateProjectDataBase;
  FProjProperties.Open(FConnection.Connection);
  UpdateOldData;
  FBillsData.Open(FConnection.Connection);
  FBillsMeasureData.Open;
  FDealPaymentData.Open(FConnection.Connection);
  FBGLData.Open(FConnection.Connection);
  if ProjProperties.PhaseCount > 0 then
  begin
    FPhaseIndex := ProjProperties.PhaseCount;
    FPhaseData.SimpleOpen2(Format('%sPhase%d.dat', [TempPath, FPhaseIndex]));
  end;
  FBillsMeasureData.ResetTreeNodeStageRec;
end;

function TProjectData.GetPriceMarginReadOnly: Boolean;
begin
  if FPhaseData.Active then
    Result := not((FPhaseIndex = FProjProperties.PhaseCount) and (FPhaseData.StageCount = 1) and (FProjProperties.AuditStatus <> -1))
  else
    Result := True;
end;

procedure TProjectData.CalculatePriceMargin;
begin
  // 计算工料价差数据
  FProjectGLData.CalculateAll;
  {if not FPhaseData.StageDataReadOnly then
  begin
    // 计算清单价差节点
    PhaseData.StageData.CalculatePriceMarginNode;
    // 计算合同支付
    PhaseData.PhasePayData.CalculateAll;
  end;}
end;

procedure TProjectData.LockProjectGLData;
const
  sLockSql = 'Update ProjectGL As P, GLPrice As G' +
             '  Set P.LockedPhaseID = %d'+
             '  Where (P.ID = G.GLID) and (G.PM_Quantity_F <> 0) and (IsNull(P.LockedPhaseID) or (P.LockedPhaseID = 0))';
var
  sSql: string;
begin
  sSql := Format(sLockSql, [FProjProperties.PhaseCount]);
  ExecuteSql(sSql);
end;

procedure TProjectData.LockDetailGLData;
const
  sLockSql = 'Update DetailGL As D Set D.LockedPhaseID = %d' +
             '  Where (D.LastBillsQuantity <> 0) and (IsNull(D.LockedPhaseID) or (D.LockedPhaseID = 0))';
var
  sSql: string;
begin
  sSql := Format(sLockSql, [FProjProperties.PhaseCount]);
  ExecuteSql(sSql);
end;

procedure TProjectData.CopyPreData;

  procedure CopyPreGLPrice;
  const
    sCopySql = 'Insert Into GLPrice (GLID, PhaseID,' +
               '    InfoPrice, InfoDate, DeltaPrice, ValidDeltaPrice,' +
               '    PreUsedQuantity, PreUsedTotalPrice,' +
               '    PM_PreQuantity, PM_PreTotalPrice,'+
               '    PrePAL_UsedQuantity, PrePAL_UsedTotalPrice,'+
               '    PrePAL_DeltaPrice, PrePAL_Total)'+
               '  Select GLID, %d,'+
               '    InfoPrice, InfoDate, DeltaPrice, ValidDeltaPrice,'+
               '    iif(IsNull(PreUsedQuantity), 0, PreUsedQuantity)+UsedQuantity, iif(IsNull(PreUsedTotalPrice), 0, PreUsedTotalPrice)+UsedTotalPrice,'+
               '    iif(IsNull(PM_PreQuantity), 0, PM_PreQuantity)+PM_Quantity_F, iif(IsNull(PM_PreTotalPrice), 0, PM_PreTotalPrice)+PM_TotalPrice_F,'+
               '    iif(IsNull(PrePAL_UsedQuantity), 0, PrePAL_UsedQuantity)+PAL_UsedQuantity_F, iif(IsNull(PrePAL_UsedTotalPrice), 0, PrePAL_UsedTotalPrice)+PAL_UsedTotalPrice_F,'+
               '    iif(IsNull(PrePAL_DeltaPrice), 0, PrePAL_DeltaPrice)+PAL_DeltaPrice_F, iif(IsNull(PrePAL_Total), 0, PrePAL_Total)+PAL_Total_F'+
               '  From GLPrice Where PhaseID = %d';
  begin
    if FProjProperties.PhaseCount > 1 then
      ExecuteSql(Format(sCopySql, [FProjProperties.PhaseCount, FProjProperties.PhaseCount - 1]));
  end;

  procedure CopyPreOMPhaseDetail;
  const
    sCopySql = 'Insert Into OMPhaseDetail (ID, PhaseID, StageID,' +
               '    PreTotalPrice, CurTotalPrice, EndTotalPrice)' +
               '  Select ID, %d, 0, PreTotalPrice + CurTotalPrice, 0, PreTotalPrice + CurTotalPrice' +
               '  From OMPhaseDetail Where (PhaseID = %d) and (StageID = -1)';
  begin
    if FProjProperties.PhaseCount > 1 then
      ExecuteSql(Format(sCopySql, [FProjProperties.PhaseCount, FProjProperties.PhaseCount - 1]));
  end;

begin
  CopyPreGLPrice;
  CopyPreOMPhaseDetail;
  PhaseData.CopyPreData;
  ProjectGLData.LoadCurPhaseInfoPrice;
  ProjectGLData.LoadStagePM_CalcData;
  FProjectGLData.RefreshGatherData;
  FOtherMeasurePhaseData.LoadCurStageData;
  BillsMeasureData.ResetTreeNodeStageRec;
end;

function TProjectData.GetStageIndex: Integer;
begin
  Result := FPhaseData.StageIndex;
end;

procedure TProjectData.SetStageIndex(const Value: Integer);
begin
  FProjectGLData.Save;
  FOtherMeasurePhaseData.Save;
  FPhaseData.StageIndex := Value;
  FProjectGLData.LoadStagePM_CalcData;
  FOtherMeasurePhaseData.LoadCurStageData;
end;

procedure TProjectData.ClearReportCacheData;
begin
  DropCacheTable('P_');
end;

function TProjectData.GetCanInsertNormalBills: Boolean;
begin
  if FProjProperties.PhaseCount > 0 then
    Result := CanUnlockInfo
  else
    Result := True;
end;

procedure TProjectData.ClearReportPrepareData;
begin
  DropCacheTable('rdp_');
end;

procedure TProjectData.DropCacheTable(const AKey: string);
var
  FTableList: TStringList;
  iIndex: Integer;
  sDeleteTableSql: String;
begin
  FTableList := TStringList.Create;
  try
    FConnection.Connection.GetTableNames(FTableList);
    iIndex := 0;
    while iIndex < FTableList.Count do
    begin
      if Pos(AKey, FTableList.Strings[iIndex]) = 1 then
      begin
        sDeleteTableSql := Format('Drop Table %s', [FTableList.Strings[iIndex]]);
        ExecuteSql(sDeleteTableSql);
      end;
      Inc(iIndex);
    end;
  finally
    FTableList.Free;
  end;
end;

procedure TProjectData.SaveDebugFile(const AFileName: string);
var
  sFileName: string;
begin
  sFileName := ExtractFileName(AFileName);
  if FDebugDir = '' then
    FConnection.SaveDebugFile('E:\' + sFileName)
  else
    FConnection.SaveDebugFile(FDebugDir + '\' + sFileName);
end;

procedure TProjectData.SaveTempDataBaseFile(const AFileName: string);
begin
  FConnection.SaveDebugFile(AFileName);
end;

procedure TProjectData.ImportDmfFile(const AFileName: string);
begin
  ImportDbTreeTo(AFileName, Self);
end;

function TProjectData.GetValidStageIsRefer: Boolean;
begin
  if FPhaseData.Active then
    Result := (FPhaseIndex = FProjProperties.PhaseCount) and (FPhaseData.StageCount = 1) and (FProjProperties.AuditStatus <> -1)
  else
    Result := False;
end;

procedure TProjectData.OpenForGather(const AFileName: string;
  APhaseIndex: Integer = -1);
begin
  FProjectID := -1;
  UnZipFile(AFileName, TempPath);
  FConnection.Open(MainFileName);
  UpdateProjectDataBase;
  FProjProperties.Open(FConnection.Connection);
  UpdateOldData;
  FBillsData.Open(FConnection.Connection);
  FBillsMeasureData.Open;
  FDealPaymentData.Open(FConnection.Connection);
  FBGLData.Open(FConnection.Connection);
  if ProjProperties.PhaseCount > 0 then
  begin
    if (APhaseIndex <= ProjProperties.PhaseCount) and (APhaseIndex > 0) then
      FPhaseIndex := APhaseIndex
    else
      FPhaseIndex := ProjProperties.PhaseCount;
    FPhaseData.SimpleOpen2(Format('%sPhase%d.dat', [TempPath, FPhaseIndex]));
  end;
  FBillsMeasureData.ResetTreeNodeStageRec;
end;

function TProjectData.IsHistoryPhase: Boolean;
begin
  Result := PhaseIndex < ProjProperties.PhaseCount;
end;

procedure TProjectData.OpenForSignOnline(AProjRec: TsdDataRecord;
  APhaseIndex: Integer);
begin
  FWebID := AProjRec.ValueByName('WebID').AsInteger;
  FWebOwnerID := AProjRec.ValueByName('WebOwnerID').AsInteger;
  FWebAuthorID := AProjRec.ValueByName('WebAuthorID').AsInteger;
  
  OpenForGather(GetMyProjectsFilePath + AProjRec.ValueByName('FileName').AsString, APhaseIndex);
  if _IsCloud then
    LoadCheckersData;
  CopyPhaseData(False);
end;

function TProjectData.GetStartMeasure: Boolean;
begin
  Result := ProjProperties.PhaseCount > 0;
end;

function TProjectData.CheckPhaseFileComplete: Boolean;
var
  i: Integer;
begin
  Result := True;
  for i := 1 to FProjProperties.PhaseCount do
  begin
    if not FileExists(Format('%s\Phase%d.dat', [TempPath, i])) then
    begin
      Result := False;
      Break;
    end;
  end;
end;

procedure TProjectData.SaveAndCheck;

  function CheckFile(AFileName: string): Boolean;
  var
    Checker: TTenderZipCompleteChecker;
  begin
    Checker := TTenderZipCompleteChecker.Create;
    try
      Checker.CheckType := zctLastPhase;
      Result := Checker.CheckFileValid(AFileName);
    finally
      Checker.Free;
    end;
  end;

begin
  AppendProjectLog('Save Project');
  Save;
  if not CheckFile(FFileName) then
  begin
    AppendProjectLog('Save Project --> Error');
    Save;
    if not CheckFile(FFileName) then
    begin
      AppendProjectLog('Save Project --> Error-2');
      ErrorMessage('保存数据出错。请重试，或联系纵横客服：企业QQ：800003850   客服热线：(0756)3850888');
      Abort;
    end
    else
      ProjectManager.AddSaveTenderBackup(FProjectID);
  end
  else
    ProjectManager.AddSaveTenderBackup(FProjectID);
  AppendProjectLog('Save Project --> End');
end;

function TProjectData.CheckLastPhaseFileExist: Boolean;
begin
  if FProjProperties.PhaseCount > 0 then
    Result := FileExists(Format('%s\Phase%d.dat', [TempPath, FProjProperties.PhaseCount]))
  else
    Result := True;
end;

procedure TProjectData.InnerSave;
begin
  try
    AppendProjectLog('Save Main Data');

    UpdateSysProgress(5, '正在保存数据');
    SaveLastestPhaseMainData;
    UpdateSysProgress(10, '正在保存数据');
    if (FPhaseData.Active) and (FPhaseIndex = ProjProperties.PhaseCount) then
      FPhaseData.Save;
    UpdateSysProgress(40, '正在保存数据');
    FMainListData.Save;
    FDealPaymentData.Save;
    UpdateSysProgress(50, '正在保存数据');
    FStaffData.Save;
    UpdateSysProgress(60, '正在保存数据');
    FBGLData.Save;
    UpdateSysProgress(70, '正在保存数据');
    FDealBillsData.Save;
    UpdateSysProgress(80, '正在保存数据');

    FProjectGLData.Save;
    FDetailGLData.Save;
    UpdateSysProgress(100, '正在保存数据');

    FBillsCompileData.ReLockBaseData;
    UpdateSysProgress(110, '正在保存数据');
    FBillsData.Save;
    UpdateSysProgress(165, '正在保存数据');

    FOtherMeasureOnceData.Save;
    FOtherMeasurePhaseData.Save;
    UpdateSysProgress(170, '正在保存数据');

    FProjProperties.AuditCompany := FStaffData.FinalStaffCompany;
    FProjProperties.Save;
    UpdateSysProgress(180, '正在保存数据');

    FConnection.Save;
    UpdateSysProgress(200, '就绪');

    AppendProjectLog('Save Main Data --> End');
  except
    ErrorMessage('保存数据出错。请重试，或联系纵横客服：企业QQ：800003850   客服热线：(0756)3850888');
    AppendProjectLog('Save Main Data --> Error');
  end;
end;

function TProjectData.SaveAs(const AFileName: string): Boolean;
begin
  try
    InnerSave;
    ZipFolder(FTempFolder, AFileName);
    SaveInfoToManager;
  except
    Result := False;
  end;
end;

procedure TProjectData.AppendProjectLog(const ALog: string);
begin
  if SupportManager.ConfigInfo.IsLog then
    MeasureLog.AppendLogTo(Format('%s: %s', [FProjectName, ALog]));
end;

procedure TProjectData.SetIsGuest(const Value: Boolean);
begin
  FIsGuest := Value;
end;

<<<<<<< HEAD
procedure TProjectData.LoadCheckersData;
var
  sURL: string;
  vA: TOVArr;
  i, iIndex: Integer;
  vStatus: TCheckStatus;
begin
  Checkers.Clear;
  sURL := Format('%suser/get/all/%d/%d/measure', [PHPWeb.MeasureURL, WebID, PhaseIndex]);
  if PHPWeb.Search(sURL, [''], [''], vA) = 1 then
  begin
    for i := Low(vA) to High(vA) do
    begin
      vStatus :=  TCheckStatus(StrToInt(vA[i, 3])-1);
      iIndex := Checkers.Add(StrToInt(vA[i, 4]), vA[i, 0], vA[i, 2], vA[i, 6], vA[i, 8]);
      if vStatus in [csFinished, csNotPass] then
        Checkers.LastChecker := Checkers.Item[iIndex];
    end;
  end
=======
procedure TProjectData.OpenForSumUpBase(const AFileName: string);
begin
  FProjectID := -1;
  UnZipFile(AFileName, TempPath);
  FConnection.Open(MainFileName);
  UpdateProjectDataBase;
  FProjProperties.Open(FConnection.Connection);
  UpdateOldData;
  FBillsData.Open(FConnection.Connection);
  FBillsCompileData.Open;
end;

procedure TProjectData.OpenForSumUpGather(const AFileName: string;
  APhaseIndex: Integer);
begin
  OpenForSignOnline(AFileName, APhaseIndex);
end;

procedure TProjectData.ImportSubTenderGather(const AFileName: string);
var
  vImportor: TstgSubGatherFileImportor;
begin
  if PhaseData.StageDataReadOnly then Exit;

  vImportor := TstgSubGatherFileImportor.Create;
  try
    vImportor.ImportGatherDataTo(PhaseData.StageData, AFileName);
  finally
    CalculateAll;
    vImportor.Free;
  end;
>>>>>>> sumUp
end;

end.